• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.399-406
• /
• 2020

The R.O.K Army has developed and operated TM to maintain the operation of weapons systems since its establishment. As more modern weapons systems were developed, the more efficient operation was limited by a large quantity. As a countermeasure, the DAPA has operated the IETM using the KAIS TOOL since 2003. However, 16 years later, they were shunned by operators for software instability and other reasons. Based on the results of an operational test and evaluation team of the Army headquarters, the analysis results of software instability, limited compatibility and integration, limited real-time updates, etc. were analyzed. It was confirmed that KAIS development tools were urgently needed. Therefore, in order to solve this current problem for the Army IETM, the first phase of this paper focused on improving the IETM by maintaining the application present, the second of the Army Electronic Technology manual, phase going to propose improvement plans for operational test and evaluation by lining 11 elements of comprehensive logistics support with an electronic technology code.

• 재활복지
• /
• v.20 no.3
• /
• pp.141-161
• /
• 2016

This research is to anticipate problems of Ray's disabled experiment welfare vehicles for 17 drivers with disability, improving them. In addition it is to provide the criteria for ergonomic design based on perspective of drivers with disability by investigating 18 items of usability test. The results are as follows. First, satisfaction degree of Ray, disabled experiment welfare vehicle, was shown to be 3.88 which is higher than normal vehicles whose degree is 3.20. This showed that the disabled experiment welfare vehicle is the one with much improvement. Second, so as to develop a welfare vehicle it needs to take into account some factors including rear slope, wheelchair locker, seat belt, safety grip, and high roof. Third, in case of rear slope, high roof and width of manual or automatic wheel chairs should be considered and motor-operated device should also be taken into account for safety lockers, which make a wheelchair firmly fixed. Moreover, motor-operated seat and rear slope can be chosen for either of the disabled and the elderly.

• Herbal Formula Science
• /
• v.30 no.2
• /
• pp.95-100
• /
• 2022

Objectives : Recent studies reported that Dokwhalkisaeng-tang (DHJST) could relieve the clinical rheumatoid arthritis (RA) symptoms and the level of RA-related blood test. However, evidence-based review on effectiveness and safety of DHJST with medication on RA was not yet provided. Methods : Searching randomized controlled trials on the use of DHJST for RA will be performed using multiple electronic databases, manual search, and contact to author. Studies will be selected according to the pre-defined criteria and collected data on study participants, interventions, control groups, outcome measurements, the results, adverse events, and risk of bias will be summarized. Primary outcome will be the disease activity score (including effective rate, swollen joint count, tender joint count, and morning stiffness), and the secondary outcomes will be RA-related blood test and adverse events. We will use Review Manager software to perform a meta-analysis, Cochrane Collaboration "risk of bias" tool for assessing the risk of bias, and Grades of Recommendation, Assessment, Development and Evaluation for the determination of quality of evidence. Results : We are going to investigate the effectiveness and safety of DHJST with medication for RA. Conclusion : This study will provide reliable evidence on whether DHJST combined with medicine is more effective on RA than medicine monotherapy.

• Journal of KIISE:Software and Applications
• /
• v.37 no.6
• /
• pp.470-479
• /
• 2010

In relation to the extraction of opinion words, it may be difficult to directly apply most of the methods suggested in existing English studies to the Korean language. Additionally, the manual method suggested by studies in Korea poses a problem with the extraction of opinion words in that it takes a long time. In addition, English thesaurus-based extraction of Korean opinion words leaves a challenge to reconsider the deterioration of precision attributed to the one to one mismatching between Korean and English words. Studies based on Korean phrase analyzers may potentially fail due to the fact that they select opinion words with a low level of frequency. Therefore, this study will suggest the k-Structure (k=5 or 8) method, which may possibly improve the precision while mutually complementing existing studies in Korea, in automatically extracting opinion words from a simple sentence in a given Korean product review. A simple sentence is defined to be composed of at least 3 words, i.e., a sentence including an opinion word in ${\pm}2$ distance from the attribute name (e.g., the 'battery' of a camera) of a evaluated product (e.g., a 'camera'). In the performance experiment, the precision of those opinion words for 8 previously given attribute names were automatically extracted and estimated for 1,868 product reviews collected from major domestic shopping malls, by using k-Structure. The results showed that k=5 led to a recall of 79.0% and a precision of 87.0%; while k=8 led to a recall of 92.35% and a precision of 89.3%. Also, a test was conducted using PMI-IR (Pointwise Mutual Information - Information Retrieval) out of those methods suggested in English studies, which resulted in a recall of 55% and a precision of 57%.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.8
• /
• pp.287-296
• /
• 2018

In the recent commercial DBMS market, as the users' burden and complaint which are related to high price licensing policy and late technical support service are increasingly rising, the concern for use of open source DBMS which has no problem with compatibility or stability is escalating. Due to the fact, the cases saving the cost are growing by converting Oracle Corporation's applications, which has about 60% share in the DBMS market, to an open source DBMS. However, in converting non-interchange sentences to an ANSI standard-based open source DBMS because of the use of PL/SQL in Oracle Corporation provides, a lot of manual work accompanies, so there is a lot of loss of time and money. Therefore, a tool that automatically converts PL/SQL to standard SQL is required. The proposed automation tool for the conversion of applications converts PL/SQL to Java Stored Procedure, an open source DBMS-based ANSI standard programming language. Through carrying out a test on the automation tool, it is proved that the tool will contribute to shortening time and saving cost by verifying the identity of input-output data and its reliability after correcting errors in converting to Java Stored Procedure.

• 대한공업교육학회지
• /
• v.39 no.2
• /
• pp.101-121
• /
• 2014

The study aims to develop the NCS based vocational curriculum model for the practical and creative human resources. For effectiveness of the study, the study consists of literature studies of both domestic and international, contents analysis, case study, expert(9samples) consultation and review, and in-depth-interview of the three advisory members. The validity of the developed model is analyzed through mean, standard deviation and contents validity ratio(CVR). The main results of the model development in our study are as follow. First, our NCS based vocational curriculum model for the practical and creative human resources is developed with the analyses of NCS development manuals, training standard utilization and training curriculum organization manuals, NCS learning module development manual and case studies, NCS research report, NCS based curriculum pilot development resources directed toward the high schools and vocational school as well as the domestic and international literature study on career training model like NCS. Second, based on the findings of our analysis in combination with the findings from the consultations with the expert and advisory committee, total 19 sub-factors of each step and domain are extracted. The sub-factors of domain in step 1 are the competency unit, definition of competency unit, competency unit element, performance criteria, range of variable, guide of assessment, key competency; in step 2, they are subject title, subject objectives, chapter title, chapter objectives, pedagogical methods, assessment methods and basic job competence; and in step 2, they are NCS based subject matrix table, NCS based subject profile, NCS based job training curriculum table, NCS based subjects organization flowchart, NCS based job training operation plan. Third, the final model including step 3 NCS based subject profile are developed in association with the linked organizational sub-factors of step 1 and step 2. Forth, the validity tests for the final model by the step and domain yield the mean 4.67, CVR value 1.00, indicating the superior validity. Also, the means of each sub-factors are all over 4.33 with the CVR value 1.00, indicating the high validity as well. The means of the associated organizations within the model are also over 4.33 with the CVR value of 1.00. Standard deviations are all .50 or lower which are small. Fifth, based on the validity test results and the in-depth-interview of the expert and advisory committee, the model is adjusted complemented to establish final model of the NCS based vocational curriculum for the practical and creative human resources.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.413-421
• /
• 2017

Mammography, the basic test for finding and treating increased breast cancer, gives the anxiety of cancer and radiation exposure to most women. In addition, it gave very severe compression pain, so we studied the degree of pain and tried to reduce the pain. The purpose of this study is to compare and analyze the modified imaging technique and the basic imaging technique based on clinical experience, respectively. The subjects of this study were 160 women from 30 to 60 years old who visited to Seoul Boramae Hospital operated by Seoul National University Hospital from February to March 2017 for breast screening. Modified 80 persons and 80 persons were divided into two groups, and each group was asked to fill out questionnaires sequentially without knowing the subjects. The first method is a modified method in which an automatic pedal is divided into four or more presses, a manual pressure is used together, and an attitude is described in detail. Secondly, we used only the automatic pedal compression method and press it within 1-3 times. In the mean of the pain distribution, the experimental group (modified method) was 2.49 and the control group (basic method) had an average of 4.86, which showed 48.8% less pain. In this modified method, the pain scores of the experimental group were lower than those of the control group, and the degree of the pain was statistically significant.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.115-123
• /
• 2016

The road name address system has been in effect in Korea since 2012. However, the existing address system is still being used in many fields because of the difference between the spatial awareness of people and the road name address system. For the spatial awareness based on the road name address system, various spatial datasets in daily life should be referenced by the road names. The goal of this paper is to link the road name address system with the wayfinding process, which is closely related to the spatial awareness. To achieve our goal, we designed and implemented a geometric matching method for spatial data sets. This method generates network neighborhoods from road objects in the 'road name address map' and the 'pedestrian network data'. Then it computes the geometric similarities between the neighborhoods to identify corresponding road name for each object in the network data. The performance by F0.5 was assessed at 0.936 and it was improved to 0.978 by the manual check for 10% of the test data selected by the similarity. By help of our method, the road name address system can be utilized in the wayfinding services, and further in the spatial awareness of people.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.21 no.3
• /
• pp.174-181
• /
• 2010

Objectives: To identify the factors affecting long-term adherence to methylphenidate treatment in children with attention-deficit hyperactivity disorder (ADHD). Methods: A retrospective medical record review of 239 ADHD patients (mean age $9.3{\pm}2.6$ years, range 6.0-17.4 years) who had visited the child and adolescent psychiatry clinic at a university hospital, in Seoul, Korea from March 2005 to February 2008. Subjects were diagnosed as ADHD based on the criteria set forth in the Diagnostic and Statistical Manual of Mental Disorders 4th edition, text revision version (DSM-IV-TR) and underwent neuropsychological tests including the continuous performance test (CPT). Treatment discontinuation was defined as the last prescription date when the medication possession rate (MPR) became less than 0.80. Subjects were divided into three groups and labeled as Group I, non-adherence without pharmacotherapy, Group II, non-adherence with short-term pharmacotherapy, and Group III, adherence with long-term pharmacotherapy. Results: Ninety (37.7%) patients were grouped as non-adherent (Groups I+II) and 149 (62.3%) as adherent (Group III). The adherence group exhibited lower intelligence, higher symptom severity, and a higher number of comorbid psychiatric disorders than controls. The use of stimulants was significantly associated with long-term adherence to treatment. Additionally, the duration of interval between the date of the first visit and the date of the first prescription was positively associated with long-term adherence. Conclusion: About two-thirds of patients diagnosed as ADHD adhered to the treatment six months after the first visit. With respect to patient evaluation and the development of treatment strategies, factors affecting early drop-out and longer follow-up must be considered.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.27-37
• /
• 1983

A method of dynamic analysis is developed for torsional free vibrations of elliptical-box girder type or stiffening truss system suspension bridge. In this study, the method based on a finite element technique using a digital computer, is illustrated by two numerical examples, the Namhae Bridge which is located in Kyungsang nam-do opened on June, 1973, and the Mt. Chunma Bridge is simple span pedestrian's suspension bridge with lateral bracing system in Mt. Chunma, Kyungki-do, are used. In general, dynamic modes of complex suspension bridges are three-dimensional in form, i.e., coupling between vertical and torsional motions. However, introduced that amplitudes of oscillation are infinitesimal for coincidence with the purpose of it's use, thereupon, the torsional vibration analyses are treated without coupling terms. A sufficient number of natural frequencies and mode shapes for torsional free vibration are presented in this paper. In the case of Mt. Chunma Bridge, the natural frequencies and periods are computed with and without reinforcement, respectively, and compared their discrepancies. The influence of the auxiliary reinforcing cables is prevailing in the first few modes, namely, 1st and 2nd in symmetric and 1st, 2nd and 3rd in antisymmetric vibration, and conspicuous in the symmetric compared with the antisymmetric motion, but in the higher modes, this kind of simple accessory elucidates rether converse effects. In the Namhae Bridge, the results are compared with the Manual's obtained by wind tunnel test. It reveals commendable agreement.