• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.124-129
• /
• 2016

Background: Work-related fatigue has a strong impact on performance and safety but so far, no agreed upon method exists to detect and quantify it. It has been suggested that work-related fatigue cannot be quantified with just one test alone, possibly because fatigue is not a uniform construct. The purpose of this study is therefore to measure work-related fatigue with multiple tests and then to determine the underlying factorial structure. Methods: Twenty-eight employees (mean: 36.11; standard deviation 13.17) participated in five common fatigue tests, namely, posturography, heart rate variability, distributed attention, simple reaction time, and subjective fatigue before and after work. To evaluate changes from morning to afternoon, t tests were conducted. For further data analysis, the differences between afternoon and morning scores for each outcome measure and participant (${\Delta}$ scores) were submitted to factor analysis with varimax rotation and each factor with the highest-loading outcome measure was selected. The ${\Delta}$ scores from tests with single and multiple outcome measures were submitted for a further factor analysis with varimax rotation. Results: The statistical analysis of the multiple tests determine a factorial structure with three factors: The first factor is best represented by center of pressure (COP) path length, COP confidence area, and simple reaction time. The second factor is associated with root mean square of successive difference and useful field of view (UFOV). The third factor is represented by the single ${\Delta}$ score of subjective fatigue. Conclusion: Work-related fatigue is a multidimensional phenomenon that should be assessed by multiple tests. Based on data structure and practicability, we recommend carrying out further studies to assess work-related fatigue with manual reaction time and UFOV Subtest 2.

• The Korean Journal of Emergency Medical Services
• /
• v.23 no.2
• /
• pp.99-107
• /
• 2019

Purpose: This study aimed to identify the position for the most accurate head-up cardiopulmonary resuscitation (CPR) by comparing saddle position CPR (SPCPR) and traditional CPR (TCPR). Methods: Sixty certified persons who completed a basic life support provider course between May 1 and June 21, 2019 were enrolled in the study. The participants were asked to perform 2 minutes of CPR, and the depth of chest compression, rate, position, full release, and hands off time were assessed. Accuracy was evaluated based on data collected from a smart phone application connected to the manikin via bluetooth and analyzed using frequency, percentage, t-test, analysis of variance and ${\chi}^2$. Results: The accuracy of chest compression was statistically significantly higher for SPCPR, 63.03%[${\pm}8.75$] for SPCPR and 55.50%[${\pm}10.17$] for TCPR [t=3.074, p=.003]. The depth of chest compression was statistically significantly greater for SPCPR, 4.51cm[${\pm}0.45$] for SPCPR and 4.16cm[${\pm}0.61$] for TCPR [t=2.503, p=.015]. The rate of chest compression was statistically significantly higher for TCPR, 105/min[${\pm}10.79$] for SPCPR and 111/min[${\pm}11.57$] for TCPR [t=-2.008, p=.049]. Accuracy of position of chest compression was statistically significantly higher for SPCPR, 96.10%[${\pm}13.73$] for SPCPR and 79.93%[${\pm}30.34$] for TCPR [t=2.659, p=.011]. Accuracy of full release was higher with SPCPR, with 86.30%[${\pm}30.53$] for SPCPR and 71.10%[${\pm}36.05$] for TCPR, but the difference was not statistically significant [t=1.762, p=.083]. Conclusion: Saddle position CPR was found to be more accurate than TCPR in the performance of manual head-up CPR.

• Journal of dental hygiene science
• /
• v.21 no.1
• /
• pp.52-62
• /
• 2021

Background: This study aims to provide basic data for development of the level-based oral health care program depending on the mother's oral health literacy by finding out how mother's oral health literacy can effect on the preschool children's oral health and behavior. Methods: The survey was conducted on 192 mothers who have preschool children and the data were analyzed by t-test, ANOVA, multiple regression analysis to identify differences in verbal and functional oral health literacy. Results: The study showed statistical significance (p<0.05) in educational level depending on differences in verbal and functional oral health literacy by sociodemographic factor. In differences in verbal and functional literacy depending on experience of education for oral health behavior and oral health, statistical significance (p<0.05) was showed highly on verbal and functional literacy in the case that subjects have an experience of education for oral health and their children have not been experienced of oral illness. And when it comes to the case that subjects have experience of education for oral health within one to two years, statistical significance was showed highly on verbal literacy. It showed that verbal and functional oral health literacy effects to oral health care behavior of children judging from results that the higher level of mother's verbal oral health literacy, the higher score of children's oral health knowledge, attitude and behavior. Conclusion: It is necessary to develop the systematic program which is appropriate for characteristics of each oral period in childhood depending on level of primary caregiver's oral health literacy, and systematic education should be preceded to enhance the literacy of the caregiver. It is considered necessary to improve the oral health care of children by developing a manual for oral health care education to enhance primary caregiver's oral health literacy.

• Journal of Society of Preventive Korean Medicine
• /
• v.25 no.3
• /
• pp.15-24
• /
• 2021

Objectives : This study sought to identify the Korean medicine treatment satisfaction of 3,000 patients who are 19 or older with experiences of being treated with Korean medicine at Korean medicine clinics or Korean medicine hospitals after experiencing traffic accidents. Methods : Frequency analysis was carried out to identify the effectiveness and satisfaction of Korean medicine services, and independent sample t-test was carried out to compare the satisfaction of users with different characteristics. Lastly, cross analysis(chi-square) was carried out to examine the relation between satisfaction and willingness to recommend. Results : Firstly, 91.3% of the patients were satisfied with the medical services provided at Korean medicine clinics, with the most satisfactory Korean medicine treatments in the order of acupuncture, moxibustion, cupping, Korean physical therapy, herbal acupuncture, Chuna manual therapy, herbal medicine, and others. Secondly, 71.3% of the patients answered that outpatient treatment was appropriate while 65.3% of the patients answered that hospitalized treatment was appropriate regarding duration of treatment at Korean medicine clinics, mostly being satisfied with the treatment duration at Korean medicine clinics and Korean medicine hospitals. Thirdly, in a survey on effectiveness of Korean medicine treatment compared to occidental medicine treatment, 85.9% of the patients answered: "the effectiveness of Korean medicine treatment is higher compared to occidental medicine or similar". Conclusion : From the results of this study, it was identified that satisfaction of Korean medicine treatment is high in motor insurance, and that higher satisfaction led to higher willingness to recommend Korean medicine treatment to others. Based on such results, the expansion of the role of Korean medicine could be understood.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.107-115
• /
• 2021

Purpose: The purpose of this study was to compare the clinical quality assurance results of portal dosimetry using an electronic portal imaging device, a method that is extensively used for patient-specific quality assurance, and the newly released Mobius3D for intensity-modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT). Methods: This retrospective study includes data from 122 patients who underwent IMRT and VMAT on the Novalis Tx and VitalBeam linear accelerators between April and June 2020. We used a paired t-test to compare portal dosimetry using an electronic portal imaging device and the average gamma passing rates of MobiusFX using log files regenerated after patient treatment. Results: The average gamma passing rates of portal dosimetry (3%/3 mm) and MobiusFX (5%/3 mm) were 99.43%±1.02% and 99.32%±1.87% in VitalBeam and 97.53%±3.34% and 96.45%±13.94% in Novalis Tx, respectively. Comparison of the gamma passing rate results of portal dosimetry (3%/3 mm) and MobiusFX (5%/3 mm as per the manufacturer's manual) does not show any statistically significant difference. Conclusions: Log file-based patient-specific quality assurance, including independent dose calculation, can be appropriately used in clinical practice as a second-check dosimetry, and it is considered comparable with primary quality assurance such as portal dosimetry.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.102-107
• /
• 2022

South Korea will soon be a super-aged society, as more than 20.6% of its population will be 65 years and older by 2025. As of 2022, 17.5% of the total population in South Korea is 65 years and older, which exceeds the set threshold for an aged society, where more than 14% of the population is 65 years and older. The proportion of older subway construction workers has increased. Aging workers and their work stress negatively impact their workability. A previous study demonstrated that the stress index measured using the uBioMacpa measurement device (Macpa stress index) had a significant correlation with work stress in South Korea. The device tests vascular health and measures stress levels via Macpa signal analysis. In this study, the pulse waves of subway construction workers were measured using uBioMacpa to identify their stress levels. The stress levels were analyzed by age, years of service, job position, employment type, and work type. Herein, these statistics could not be easily represented by a normal distribution; therefore, the Kruskal-Wallis test, a nonparametric statistical method, was used for the analysis of data. The results showed that age, job position, employment type, and working type affected the Macpa stress index and the stress levels of workers increased with age. In terms of job position, technical engineers were more stressed than other workers because of their poor working environment. In terms of employment type, daily-wage workers were more stressed than other workers. In terms of working type, tunneling, waterproofing, and construction scored the highest Macpa stress indexes without any significant difference, whereas earthworks scored the lowest. Based on the analysis of Macpa stress index, safety and health management plans were proposed to reduce the stress levels of workers. Moreover, a manual for efficient stress management must be developed for subway construction workers.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.5
• /
• pp.53-62
• /
• 2007

Recently, for the stabilization estimation of structures, many automatic measuring instruments with expensiveness and high accuracy have been developed and utilized. However, the existing manual measuring systems are almost impossible to measure the real-time for the whole surface of large-scale structures and an automatic measuring system has disadvantages with demanding enormous expense. In this study, 3D digital visual monitoring system was developed by using digital photogrammetry technique. To confirm application of developed system, it was applied to the measurement of the wall displacement of concrete surface and displacement measurement of reinforced-soil wall block. Then, the result of the test was compared with measuring value of total station. Based on the results of the comparison, the application of visual monitoring system was evaluated. The results show that the developed visual monitoring system could be available in displacement measure of structures.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.11
• /
• pp.27-37
• /
• 2007

Downhole seismic method is very economic and easy to operate because it uses only one borehole and simple surface source to obtain the shear wave velocity profile of a site. In this study, automatic shear wave source was developed for efficient downhole seismic testing. This source is motor-spring type and easy to control. It can lessen the labor of operator and the working time. Moreover, it can provide better and repetitive signals for data interpretation. By combining developed automatic source with automatic receiver system, PC based data acquisition system, advanced managing program, and semi-automatic downhole performing system were constructed. Through comparison test with manual source, advantages of automatic source were verified. Constructed semi-automatic downhole testing system including automatic shear wave source was applied to the soft soil site. The applicability and reliability were verified and the importance of automating testing system for obtaining reliable result was emphasized.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.294-303
• /
• 2023

This study was to find out the differences in self-esteem, body composition, and muscle strength of middle-aged women, and nine physical labor groups were selected as beautification workers at D University in Cheonan, and a total of 17 were selected as non-physical labor groups were 8 full-time housewives living in Cheonan. After selecting the subjects, the subjects arrived 30 minutes before the start of the experiment and completed the self-esteem questionnaire. After taking the stability, the measurement was carried out in the order of body composition, grip strength, and isokinetic muscle function, and the independent sample t-test was conducted. First, middle-aged women's self-esteem according to the type of physical labor was high in the physical labor group in relation to others among the sub-factors. Second, there was no significant difference in body composition according to the physical labor patterns of middle-aged women. Third, there was no significant difference in lower limb isokinetic muscular strength according to the types of physical labor of middle-aged women. Third, there was no significant difference in lower limb isokinetic muscular strength according to the types of physical labor of middle-aged women. The self-esteem according to physical labor is caused by the sense of belonging in the workplace, and the difference between body composition and muscular strength is insignificant. Therefore, it is necessary to introduce a physical activity program to promote self-esteem due to aging and prevent physical deterioration regardless of occupation.

• The Journal of Korean Medicine
• /
• v.44 no.3
• /
• pp.140-149
• /
• 2023

Objectives: This case report aims to describe the effects of craniosacral therapy and acupuncture in a patient with chronic migraine. Methods: A 33-year-old man with chronic migraine was treated with 20 sessions of craniosacral therapy and acupuncture for 8 weeks. The number of migraine and headache days were monitored every month. The pain intensity of headache was measured on the visual analog scale (VAS). Korean Headache Impact Test-6 (HIT-6) and Migraine Specific Quality of Life (MSQoL) were also used. Results: The number of headache days per month reduced from 28 to 7 after 8 weeks of treatment and to 3 after 3 months of treatment. The pain intensity of headache based on VAS reduced from 7.5 to 3 after 8 weeks and further to < 1 after 3 months of treatment. Furthermore, the patient's HIT-6 and MSQoL scores improved during the treatment period, which was maintained or further improved at the 3 month follow-up. No side effects were observed during or after the treatment. Conclusion: This case indicates that craniosacral therapy and acupuncture could be effective treatments for chronic migraine. Further studies are required to validate the efficacy of craniosacral therapy for chronic migraine.