• 조명전기설비학회논문지
• /
• 제23권7호
• /
• pp.75-80
• /
• 2009

In this study, a Web server was constructed using LabVIEW's DataSocket, which makes possible acquisition, analysis, and saving in real time. The output value of the optical current sensor at the web server PC was measured and the output value was displayed using the Web browser of the client PC. DataSocket by LabVIEW makes the construction of a Web server easier than other languages and is compatible with other application programs. An optical current sensor was composed using a 1310 [nm] laser diode, and 9/125 [${\mu}m$] standard single mode optical fiber and was created to be a close type sensor. Data measurement using Web servers has the advantage of monitoring electric power systems at a great distance and can fuse IT technology and electric power systems. Also, this measurement uses inexpensive mounting and programming when compared to existing measurement equipment allowing the construction of a measurement system in any situation or surrounding.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.120-123
• /
• 2019

The effect of surface plasmon on ZTO thin films was investigated. The phenomenon of depletion occurring in the interface of the ZTO thin film created a potential barrier and the dielectric layer of the depletion formed a non-mass particle called plasmon. ZTO thin film represents n-type semiconductor features, and surface current by plasma has been able to obtain the effect of improving electrical efficiency as a result of high current at positive voltage and low current at negative voltage. It can be seen that the reduction of electric charge due to recombination of electronic hole pairs by heat treatment of compound semiconductors induces higher surface current in semiconductor devices.

• 한국광학회지
• /
• 제35권3호
• /
• pp.115-120
• /
• 2024

자기광학(magneto-optical, MO) 효과가 우수한 광학소재는 자기장센서, 광전류센서, 광 고립기(optical isolator), 그리고 광서큘레이터와 같은 다양한 응용 분야에서 활용될 수 있어 많은 관심을 받고 있다. 본 연구에서는 일반적인 유리용융법을 사용하여 Dy³⁺ 이온이 고농도로 함유된 알루미노보로실리케이트(alumino-borosilicate, ABS) 광학유리를 제조하고, Dy³⁺ 이온 농도에 따른 ABS-Dy 유리의 열 특성, 광 특성 및 자기광학 특성을 분석하였으며 1550 nm 파장 대역에서 유리의 MO 특성을 패러데이 회전각 측정을 통하여 분석하였다. 패러데이 회전각은 유리의 Dy³⁺ 이온 농도가 증가함에 따라 선형적으로 증가하는 것으로 나타났으며, 특히 Dy₂O₃ 함량이 30 mol%인 유리는 -6.86 rad/(T·m) 가량의 높은 베르데 상수를 갖는 것으로 확인되었다. 또한 제조된 ABS-Dy 유리는 128 ℃ 이상의 우수한 열안정성(∆T= T_x-T_g)과 파장 대역이 각각 490-710, 1390-1560, 1800-2400 nm일 때 70% 이상의 높은 광투과특성을 보여주었다. 이상의 높은 베르데 상수와 우수한 열안정성은 본 연구에서 제안한 ABS-Dy 유리가 1550 nm MO 소자용 광학소재로 사용 가능함을 시사한다.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권3호
• /
• pp.143-157
• /
• 2015

Successful integration of cementless femoral stems using porous surfaces relies on effective periimplant bone healing to secure the bone-implant interface. The initial stages of the healing process involve protein adsorption, fibrin clot formation and cell osteoconduction onto the implant surface. Modelling this process in vitro, the current work considered the effect of fibrin deposition on the responses of human mesenchymal stromal cells cultured on ferritic fibre networks intended for magneto-mechanical actuation of in-growing bone tissue. The underlying hypothesis for the study was that fibrin deposition would support early stromal cell attachment and physiological functions within the optimal regions for strain transmission to the cells in the fibre networks. Highly porous fibre networks composed of 444 ferritic stainless steel were selected due to their ability to support human osteoblasts and mesenchymal stromal cells without inducing untoward inflammatory responses in vitro. Cell attachment, proliferation, metabolic activity, differentiation and penetration into the ferritic fibre networks were examined for one week. For all fibrin-containing samples, cells were observed on and between the metal fibres, supported by the deposited fibrin, while cells on fibrin-free fibre networks (control surface) attached only onto fibre surfaces and junctions. Initial cell attachment, measured by analysis of deoxyribonucleic acid, increased significantly with increasing fibrinogen concentration within the physiological range. Despite higher cell numbers on fibrin-containing samples, similar metabolic activities to control surfaces were observed, which significantly increased for all samples over the duration of the study. It is concluded that fibrin deposition can support the early attachment of viable mesenchymal stromal cells within the inter-fibre spaces of fibre networks intended for magneto-mechanical strain transduction to in-growing cells.

• Journal of Microbiology and Biotechnology
• /
• 제31권4호
• /
• pp.501-509
• /
• 2021

More than half the world's population is thought to be infected with Helicobacter pylori. Although the majority of infected people are asymptomatic, H. pylori infection may cause gastric ulcers and deadly gastric cancer. Owing to the difficulty and invasiveness of current routine culture and diagnostic methods, a highly sensitive and specific noninvasive assay for H. pylori is of interest. This study highlighted the design and performance of a colorimetric magneto loop-mediated isothermal amplification (CM-LAMP) assay to detect H. pylori in spiked saliva samples. LF primers were coated on magnetic nanoparticles by carbodiimide-induced immobilization and functionally used for solid-phase amplification. During the LAMP reaction at 66℃, biotin-tagged FIPs were incorporated into LAMP amplicons. The colorimetric signal developed after the addition of NeutrAvidin horseradish peroxidase conjugate (NA-HRP) and ABTS. None of the tested microorganisms, including closely related bacteria, was shown positive by the CM-LAMP assay except H. pylori isolates. This novel platform was highly specific and 100-fold more sensitive (40 CFU/ml or 0.2 CFU per reaction) than the PCR and conventional LAMP assays for the detection of H. pylori in spiked saliva. Our results demonstrated the feasibility of using this noninvasive molecular diagnostic test to detect H. pylori in saliva samples.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1349-1355
• /
• 2015

It is difficult to calculate the magnetic force of an object of magnetic material in contact with other objects using the existing methods, such as Maxwell stress tensor method, magnetic charge method, or magnetizing current method. These methods are applicable for force computation only when the object is surrounded by air. The virtual air-gap concept has been proposed for calculating the contact force. However, its application is limited to magneto-static system. In this paper, we present the virtual air-gap concept for contact surface force in the eddy-current system. Its validity and usefulness are shown by comparison between numerical and experimental examples.

• 한국산업융합학회 논문집
• /
• 제5권3호
• /
• pp.233-238
• /
• 2002

본 논문에서는 유도가열조리기의 효과적인 설계를 위하여 입력주파수 변화에 따른 유도가열조리기의 자계와 열계 해석 방법을 제시하였다. 유도가열조리기의 내부자계는 3차원 축대칭 유한요소법을 사용하여 해석하였으며, 열원은 유도가열조리기의 내부에서 유도된 와전류에 의하여 발생되고, 열은 열원과 열방정식을 사용하여 계산되어진다. 또한, 유도가열조리기의 온도특성을 스테인레스와 알루미늄 각각에 대하여 주파수와 투자율에 따라 제시하였다.

• 한국산업융합학회 논문집
• /
• 제5권2호
• /
• pp.133-139
• /
• 2002

In this paper, the magneto-thermal analysis of an induction heating jar is presented as an efficient design. The magnetic field inside the axisymmetric shaped cooker is analyzed using an axisymmetric FEM(Finite Element Method) and the effectual heat source is obtained by calculation of the induction current in the Jar. The temperature distribution can be calculated using the heat source and heat equation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.950-953
• /
• 1999

Spin tunneling giant magnetoresistance effect was studied to utilize in the application of random access memory. Ferromagnetic/Insulator/Ferromagnetic films were sputtered on glass substrates and perpendicular current was applied. Measurements of magneto- resistance of the junction showed 8.6% of MR ratio. Voltage output depends on the magnetization directions of the write line and read line, thus enabling the system to be used as a random access memory

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.458-458
• /
• 2003

In this study the induced-current density distributions in spherical human model by the magnetic field from electric power lines were analysed with visualization and also the effects of phase difference between components of magneto field were investigated.