• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.12
• /
• pp.655-660
• /
• 2003

This paper proposes new single stage power factor correction (PFC) full bridge converter. The proposed converter is combined previous ZVS full bridge DC/DC converter with two inductors, two diodes, two magnetic coupling transformer for PFC. This process of power is isolated from the source and also regulate stable DC output voltage in a category. In this topology, the voltage stress of main switches is reduced by zero voltage switching. Moreover, the proposed converter doesn't need active PFC switch and auxiliarly circuits, like control and gating board, so it could decrease the size and cost and increase the efficiency.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.843-845
• /
• 2001

In this paper, we analyze the characteristics of electecromotive force(emf), phase current and torque according to the length of the air gap using 2nd order FEM(Finite Element Method) in Synchronous Reluctance Motor(SRH) and Brushless DC Motor(BLDC) with same volume and size. In the analysis with FEM, we applied the time-step function considering the motor switch in the magnetic vector potential of the unknown node.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.757-759
• /
• 2001

전동기 전원 개폐를 주목적으로 하는 전자개폐기는 빈번하고 불규칙한 개폐동작에 의해 발생되는 Arc 에너지에 대해 전기적으로 내구성능을 확보하는 것이 중요하다. 또한, 전기적 내구 성능은 수명과 품질을 결정하는 요인으로서 선진업체에서는 내구성능을 향상시키려 연구개발 활동에 집중하고 있다. 이러한 전기적 내구 성능을 향상, 평가하기 위해서는 장기간에 걸친 시험 기간과 시험규격에서 요구하는 조건을 만족시키는 시험 회로와 설비구성이 필수적이다. 여기서는 전기적 내구 성능에 대한 이해와 시험규격을 통한 시험회로 설계 및 설비제작에 대해 설명하고 시험결과를 분석하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.916-917
• /
• 2001

We investigated the properties of a hybrid type superconducting fault current limiter (SFCL), which consists of a transformer with multiple secondary windings and resistive $YBa_2Cu_3O_7$ (YBCO) thin film stripes. The secondary windings of the transformer were coupled with each other, and a superconducting current limiting unit of YBCO stripes was connected to each of them as a switch. Simple connection in series of SFCL units tends to produce imbalance in power among the units due to slight differences in quench current. In current design, magnetic coupling between the SFCL units provides a solution to power dissipation imbalance, inducing simultaneous quench by current redistribution in the YBCO films.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2191-2192
• /
• 2006

이 논문에서는 자기에너지 회생 스위치(MERS)를 이용한 3상 유도전동기의 역률개선을 목표로 한다. 기존의 MERS는 단상의 유도성 부하에 대해서는 간단한 제어방법을 통하여 역률을 개선시키는 효과가 있는 스위치로 알려져 있다. 이러한 스위치의 기능을 응용하여 논문에서는 실제 전철 등의 구동시스템에서 사용하는 3상 유도전동기 부하를 가진 시스템에 MERS를 적용시켰을 때 어떠한 이점들이 발생 하는지를 제안한다. 시뮬레이션을 위해 실제로 사용되는 3상 유도전동기와 이를 구동시키기 위한 컨버터와 인버터가 포함된 모터 구동 회로를 직접 구성하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.559-560
• /
• 2006

이 논문에서는 자기에너지 회생 스위치(MERS)를 이용한 3상 유도전동기의 역률개선을 목표로 한다. 기존의 MERS는 단상의 유도성 부하에 대해서는 간단한 제어방법을 통하여 역률을 개선시키는 효과가 있는 스위치로 알려져 있다. 이러한 스위치의 기능을 응용하여 논문에서는 실제 전철 등의 구동시스템에서 사용하는 3상 유도전동기 부하를 가진 시스템에 MERS를 적용시켰을 때 어떠한 이점들이 발생하는지를 제안한다. 시뮬레이션을 위해 실제로 사용되는 3상 유도전동기와 이를 구동시키기 위한 컨버터와 인버터가 포함된 모터 구동 회로를 직접 구성하였다.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.356-363
• /
• 2018

The combination of a buck converter and a forward converter can be considered to accomplish a high step-down non-isolated converter. To decrease the insufficient step-down ratio of a regular buck converter and to distribute switch voltage stress, a forward-integrated buck (FIB) converter is proposed in this paper. The proposed interleaved DC-DC converter provides an additional step-down gain with the help of a forward converter. In addition to its simple structure, the transformer flux reset problem is solved and an additional magnetic core reset winding is not required. The operational principle and an analysis of the proposed FIB converter are presented and verified by experimental results obtained with a 240 W, 150 V/24 V prototype.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.72-75
• /
• 2001

The persistent current mode operation of HTS coils is one of the key technologies required for very high-field MRI magnets composed of LTS and HTS coils. But to date, the fabrication of persistent current mode system using HTS is not investigated well. In this paper, we fabricated the magnet and PCS using by BSCCO-2223 tape and jointed them with solder. The current decay behavior of the circuit was measured in liquid nitrogen by monitoring the magnetic field in the centre of magnet with a Hall sensor. To enhance the characteristic of persistent current mode system, superconducting joint method should be investigated.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.145-153
• /
• 1997

This paper proposes a constant frequency controlled forward zero voltage switching multi resonant converter (ZVS-MRC) which operates with a fixed duty ratio. The proposed converter is obtained from a conventional forward ZVS-MRC by placing a saturable core in parallel with the secondary side of the transformer. Experimental results are presented for a proposed converter which operates at 1.5MHz switching frequency with an output power of 50W (5V/10A). The merits of the proposed converter include ; 1) reduced voltage stress to the main switch compared with the conventional counterpart, 2) ease on designing the magnetic components including EMI and output filter, and 3) simple control scheme.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.49-51
• /
• 1997

This paper deals with analysis of high frequency transformer for forward converter using the finite element method and circuit analysis. Finite element analysis considering magnetic nonlinearity of ferrite core and circuit analysis are utilized when converter switch(FET) is on and off, respectively. As a result, the primary current and load current of a forward converter are obtained under the various load conditions.