• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.186-194
• /
• 2000

bottom as a reference basis, some theoretical elements which form bottom echoes during acoustic survey of demersal fish were considered. A stable bottom detection method based on maximum voltage difference, which was not influenced by variable levels and waveform transformation. The method has been shown to be effective using in-situ bottom echo waveforms and computer simulation data. A comparison between near-bottom SV profiles acquired in Funka Bay, Hokkaido, of Japan, the East China Sea and the Yellow Sea, of Korea, with the threshold method and maximum differential voltage method, shows that the SV obtained with the maximum differential voltage method is 4-6 dB higher than those with threshold method within 2m from the bottom.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.1
• /
• pp.36-43
• /
• 1997

In order to express the FLP recombinase in B. mori cultured cell line, BmN-4, transient expression system using a heat shock protein gene (hsp70) promoter of Dorosophilla melnogaster was constructed. This vector was designated as pHsSV. Activity strength of the hsp70 promoter was compared with that of immediate early gene (IE-1) and polyhedrin gene of BmNPV employing the E. coli $\beta$-galactosidase gene as a reporter gene. The result showed that the pHs $\beta$-gal plasmid vector expressed the $\beta$-galactosidase at 2nd and 3rd day after the transfer of plasmid DNA into BmN-4 cells, which was similar to that of pIE1 $\beta$-gal vector, but different from that of a recombinant virus, vBm $\beta$-gal. For the construction of FLP recombinase transient expression vector, the FLP recombinase gene was cloned by polymerase chain reaction technique. To express the FLP recombinase, this gene was inserted into pHsSV plasmid vector, under the control of the hsp70 promotor, and tranfected in BmN-4 cells. The expressed FLP recombinase was estimated at 44kDa on a 12.5% SDS-PAGE.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.11-15
• /
• 2008

In order to transport spent resin in a high integrated container made of high density polyethylene, a method for determining transportation grade by radioactivity analysis was developed. Ratios of radioisotopes in spent resin were derived from radioactivity analysis on spent resin. Associated curie-to-dose factors were determined to estimate radioisotope inventory from surface dose rates of spent resin. From the results, Activity limit of type A package was derived to be 1.19 TBq for HIC, and the corresponding surface dose rate was found to be 124.2 mSv/h.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.4
• /
• pp.247-253
• /
• 2008

The TMO may contain two types of methods, time-triggered methods(also called the spontaneous methods of SpMs) which are clearly separated from the conventional service methods (SvMs). The SpM executions are triggered upon design time whereas the SvM executions are triggered by service request message from clients. In this paper, we describes the application environment as the patient monitor telemedicine system with TMO structure. Vital sign information web viewer systems is also the standard protocol for medical image and transfer. In order to embrace new technologies as telemedicine service, it is important to develope the standard protocol between different systems in the hospital, as well as the communication with external hospital systems.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.2
• /
• pp.160-164
• /
• 2006

Currently, boars selected for commercial use as AI sires are evaluated on grow-finish performance and carcass characteristics. If AI sires were also evaluated and selected on semen production, it may be possible to reduce the number of boars required to service sows, thereby improving the productivity and profitability of the boar stud. The objective of this study was to estimate genetic correlations between production and semen traits in the boar: average daily gain (ADG), backfat thickness (BF) and muscle depth (MD) as production traits, and total sperm cells (TSC), total concentration (TC), volume collected (SV), number of extended doses (ND), and acceptance rate of ejaculates (AR) as semen traits. Semen collection records and performance data for 843 boars and two generations of pedigree data were provided by Smithfield Premium Genetics. Backfat thickness and MD were measured by real-time ultrasound. Genetic parameters were estimated from five four-trait and one five-trait animal models using MTDFREML. Average heritability estimates were 0.39 for ADG, 0.32 for BF, 0.15 for MD, and repeatability estimates were 0.38 for SV, 0.37 for TSC, 0.09 for TC, 0.39 for ND, and 0.16 for AR. Semen traits showed a strong negative genetic correlation with MD and positive genetic correlation with BF. Genetic correlations between semen traits and ADG were low. Therefore, current AI boar selection practices may be having a detrimental effect on semen production.

• Journal of radiological science and technology
• /
• v.23 no.1
• /
• pp.13-19
• /
• 2000

We have presented with the "A study on overexposure rate according to over-density in chest X-ray radiography(I)" last year. In this report, We could calculate the entrance skin dose from chest X-ray film density the formula $I_0=Ix/e^{-{\mu}x}{\times}mG$, (mG is Bucky factor) was used to deliver the skin dose. At that time, There was two problems that the Bucky factor from maker was not equal to field experience and the field size influenced on the Attenuation Rate. The experiment of Bucky factor was done from film method and retried the Attenuation Rate of Acryle phantom according to Good & Poor geometry. As the results, The Bucky factor from maker higher than in this experiments $30{\sim}40%$. The Attenuation Rate in good geometric condition brings about a little alteration compare with poor geometric condition. In the field experiment, we could get the chest image with very low entrance skin radiation dose $29.3{\mu}Sv$, especially with air gap methode, the entrance skin dose was detected $10{\mu}Sv$.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.193-198
• /
• 2015

This study analyzed the total number of 19,636 patients and radiation technologists, 11,433 of male and 8,203 of female by examined body parts, age, types of detectors, the using contrast enhancement and working condition of the technologists, regular staffs or rotation-duty staffs, based on the K-DOS program distributed by FDA with the DLP value of diagnostic evaluation. The result shows that the effective radiation dose was 0.7mSv~41.7mSv for each region and male patients had more radiation exposure than females. And the amount of exposure was also affected by the types and the method of detectors. Furthermore, the regular staffs took the role of helping the patient to get reduced amount of radiation exposure than rotation duty-staffs. Computed tomography (CT) use has increased dramatically over the past several decades. In this reason, to support the patients and the workers' health in the field, the hospitals should apply specialized regular working radiation technologist system and manufacturing companies of those CTs should develop low medical radiation exposure devices.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1772-1777
• /
• 2017

Korean nuclear power plants (NPPs) periodically evaluate the radioactive gaseous and liquid effluents released from power reactors to protect the public from radiation exposure. This paper provides a comprehensive overview of the release of radioactive effluents from Korean NPPs and the effects on the annual radiation doses to the public. The amounts of radioactive effluents released to the environment and the resulting radiation doses to members of the public living around NPPs were analyzed for the years 2011-2015 using the Korea Hydro & Nuclear Power Co., Ltd's annual summary reports of the assessment of radiological impact on the environment. The results show that tritium was the primary contributor to the activity in both gaseous and liquid effluents. The averages of effective doses to the public were approximately on the order of $10^{-3}mSv$ or $10^{-2}mSv$. Therefore, even though Korean NPPs discharged some radioactive materials into the environment, all effluents were within the regulatory safety limits and the resulting doses were much less than the dose limits.

• Journal of Radiation Protection and Research
• /
• v.34 no.4
• /
• pp.165-169
• /
• 2009

Two dosimeters are provided to radiation workers participating in tasks where high radiation exposure is expected during maintenance at nuclear power plants. At Korean nuclear power plants, two dosimeters are currently provided for tasks where exposure rates exceed 1 mSv/hr, the difference of equivalent dose to specific parts of the body is more than 30% and an exposure of more than 2 mSv is expected in a single task. These conditions for the provisioning of two dosimeters are based on previous field test results, and it is recommended that the dosimeters be worn on the chest and back. It was also found that the workers felt it was more convenient when they wore two dosimeters on chest and back rather than on chest and head. After the application of previous field test results to practice, it was found that the calculated effective dose for workers during radiation work was lower than the maximum dose of chest or back dosimeter by approximately 10%-30%. This performance is regarded not only to meet the international guideline but also to provide convenience for workers during radiation work.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.4
• /
• pp.291-297
• /
• 1996

Liposomes of $pSV-{\beta}-Galactosidase$ vector plasmid DNA with various lipid composition were prepared by the thin-film method. Size distribution, shape and the efficiency of plasmid DNA encapsulation were investigated. Effect of sonication time on the plasmid DNA entrapment in liposomes and stability at $4^{\circ}C$ were also examined. Sizes of neutral liposomes were about 100-200 nm and above $1\;{mu}m$, and those of cationic liposomes were about 400-600 nm and above $1\;{mu}m$. Shapes of liposomes entrapped plasmid DNA were spherical. Proper sonication time for better entrapment was below 15 minutes and stability at $4^{\circ}C$ was decreased rapidly after 1 day. Plasmid DNA entrapments of complex liposomes of various lipids were higher than those of liposomes made from one sort of lipid. Plasmid DNA entrapments of cationic liposomes were higher than those of neutral liposomes.