• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.338-338
• /
• 2017

One of the problems in increasing rice production is getting lines or varieties that have high adaptability so that able to produce maximum production in a variety of environmental conditions. One strategy that can be done to get adaptive varieties is through the improvement of native varieties. This research was conducted in rain fed paddy field, Aceh province, Indonesia from June to September 2014. The texture of the soil was clay-loam with the soil pH ranged from 6.5-6.7. Five potential progenies of rice from crossing between native Indonesian rice with introduced rice varieties consist of C3, C4, S3, S5, S6 were used in this study. Besides that, one national rice variety Ciherang also used as a comparison. The plants were growth in the plot with the size of $2m{\times}1.4m$ with plant distance was $20cm{\times}20cm$. The fertilizers used in this study were Urea, NPK, and KCl. Randomized block design with 6 rice progenies/variety and 3 replications were used in this study. There were 18 experimental units and each experimental unit had 10 samples for the sources of data. The variables that were observed in this study including plant height at harvesting time, number of productive tiller, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per hectare. Analyzed were also conducted for the depth of root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio and its correlation with the weight of filled grain per hill. The research results show that there was significant difference on plant height at harvesting time, number of productive tillers, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per ha (p>0.01) among the treatments. In addition, depth root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio also had significant difference (p>0.01) among the treatment. The highest plant at harvesting time was found in S6, reaching 129.8 cm and the shortest plants was found in C3 reaching 107.5 cm. The largest number of productive tillers and the highest percentage of filled grains per panicle were found in Ciherang reaching 10.5 tillers and 80.7% respectively. Ciherang also had the heaviest weight of filled grains per hill and per plot reaching 21.1 g and 2.18 kg respectively. Whereas, S6 had the lowest number of tillers and the lowest percentage of filled grain per panicle.. The highest yield potential per ha was found in Ciherang reaching 7.79 tons. Among the progenies, S5 had the highest yield potential reaching 5 tons/Ha. The result also showed significant relationship between shoot-root weight ratio with weight of filled grains per hill. The highest value of shoot-root weight ratio (1.57) in Ciherang is thought had closed relationship with its yield potential.

• Korean Journal of Veterinary Research
• /
• v.9 no.2
• /
• pp.19-25
• /
• 1969

The effects of some chemicals for the germinative stimulation of Clostridium chauvoei spore studied. The results obtained were as follows: 1. Cooked meat medium (CMM) was superior to Liver-liver bouillon (LLB) for cultivation of the organisms. 2. Heating the organisms at $70^{\circ}C$ for 30 minutes prior to cultivation in CMM stimulated the germination rate. 3. The addition of 0.5mM L-alanine to CMM was found to be most effective for the rapid germination of the spores. 4. The addition of 0.2 mM D-alanine to CMM inhibited the germination of the spores even if the spores were heat treated. 5. The addition of 0.1mM manganese retarded the germination time, but the final germination rate was greater with 0.1mM manganese than with 0.5mM L-alanine. 6. The addition of both 0.5mM L-alanine and 0.1mM manganese stimulated the germination rate to 100 per cent. 7. The germination rate was greater with the addition of germination stimulants than without any stimulants. The germination rate was approximately 6 per cent greater with prior heat treatment than without heat treatment. 8. The optimum time for the harvest of vegetative forms of the organisms was 15 hours after cultivation in the media which contain suitable germination stimulants.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.104-109
• /
• 2019

The crops recommended for the plant factory system are diverse. The importance of planting density in the plant factory is being recognized. The objective of this study was to determine the optimal planting density for growth and quality of kohlrabi in a closed-type plant factory system. The kohlrabi was grown under fluorescent lamps and nutrient film technique system. The growth and quality of kohlrabi were investigated under four different planting densities ($22plants/m^2(15{\times}30cm)$, $27plants/m^2(15{\times}25cm)$, and $33plants/m^2(15{\times}20cm)$). There were no significant interactions between Shoot fresh and dry weights per plant or bulb stem fresh and dry weights per plant and planting density. Shoot fresh and dry weight per area or bulb stem fresh and dry weight per area were the highest at $33plants/m^2$. There were no significant interactions between plant height, leaf area, photosynthetic rate, hardness, and chlorophyll content and planting density. Significant differences in Bulb stem height and diameter, and brix were observed. Bulb stem height and diameter and brix of kohlrabi were the highest at $22plants/m^2$. Based on our results, we conclude that the optimal planting density is $33plants/m^2$ for growth of kohlrabi, however, the optimal planting density is $22plants/m^2$ for quality of kohlrabi in a closed-type plant factory system.

• Progress in Medical Physics
• /
• v.10 no.1
• /
• pp.1-7
• /
• 1999

In this study, the dose distributions of a $^{32}$ p uniform cylindrical volume source and a surface source, a pure $\beta$emitter, were calculated in order to obtain information relevant to the utilization of a balloon catheter and a radioactive stent. The dose distributions of $^{32}$ p were calculated by means of the EGS4 code system. The sources are considered to be distributed uniformly in the volume and on the surface in the form of a cylinder with a radius of 1.5 mm and length of 20 mm. The energy of $\beta$particles emitted is chosen at random in the $\beta$ energy spectrum evaluated by the solution of the Dirac equation for the Coulomb potential. Liquid water is used to simulate the particle transport in the human body. The dose rates in a target at a 0.5mm radial distance from the surface of cylindrical volume and surface source are 12.133 cGy/s per GBq (0.449 cGy/s per mCi, uncertainty: 1.51%) and 24.732 cGy/s per GBq (0.915 cGy/s per mCi, uncertainty: 1.01%), respectively. The dose rates in the two sources decrease with distance in both radial and axial direction. On the basis of the above results, the determined initial activities were 29.69 mCi and 1.2278 $\mu$Ci for the balloon catheter and the radioactive stent using $^{32}$ P isotope, respectively. The total absorbed dose for optimal therapeutic regimen is considered to be 20 Gy and the treatment time in the case of the balloon catheter is less than 3 min. Absorbed doses in targets placed in a radial direction for the two sources were also calculated when it expressed initial activity in a 1 mCi/ml volume activity density for the cylindrical volume source and a 0.1 mCi/cm$^2$ area activity density for the surface source. The absorbed dose distribution around the $^{32}$ P cylindrical source with different size can be easily calculated using our results when the volume activity density and area activity density for the source are known.

• Journal of Environmental Health Sciences
• /
• v.43 no.6
• /
• pp.525-531
• /
• 2017

Objectives: The purpose of this experiment is to better understand the nitrogen and phosphorus removal ratio according to operating conditions in an iron electrolysis system consisting of an anoxic basin, aerobic basin, and iron precipitation apparatus. Methods: Iron electrolysis consists of an iron precipitation reactor composed of iron plates in oxic and anoxic basins. We studied the interrelation coefficient between T-N and T-P removal rates and F/M ratio, and the C/N ratio and BOD removal rate. Results: The F/M ratio and the T-N and T-P removal rate per unit area have interrelation coefficients of 0.362 and 0.603, respectively. The removal rate per MLVSS and the T-N and T-P removal rate per unit area have respective interrelation coefficients of 0.49 and 0.59. Conclusions: The removal rate of T-N and T-P increased with the increasing F/M ratio in the influent, and they also linearly increased in proportion to the C/N ratio of influent and BOD removal rate of the reactor.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.3
• /
• pp.250-260
• /
• 2004

This study considers a linear connected-(r,s)-out-of-(m,n):F lattice system whose components are ordered like the elements of a linear (m,n )-matrix. We assume that all components are in the state 1 (operating) or 0 (failed) and identical and s-independent. The system fails whenever at least one connected (r,s)-submatrix of failed components occurs. The purpose of this paper is to present an optimization scheme that aims at minimizing the expected cost per unit time. To find the optimal threshold of maintenance intervention, we use a genetic algorithm for the cost optimization procedure. The expected cost per unit time is obtained by Monte Carlo simulation. The sensitivity analysis to the different cost parameters has also been made.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.561-567
• /
• 2017

This paper presents a 4-channel common-cathode VCSEL driver array operating up to 6.25 Gb/s per channel for the applications of HDMI 2.0 active optical cables. The proposed VCSEL driver consists of an input buffer, a modified Cherry-Hooper amplifier as a pre-driver, and a main driver with pre-emphasis to drive a common-cathode VCSEL diode at high-speed full switching operations. Particularly, the input buffer merges a linear equalizer not only to broaden the bandwidth, but to reduce power consumption simultaneously. Measured results of the proposed 4-channel VCSEL driver array implemented in a $0.13-{\mu}m$ CMOS process demonstrate wide and clean eye-diagrams for up to 6.25-Gb/s operation speed with the bias current 2.0 mA and the modulation currents of $3.1mA_{PP}$. Chip core occupies the area of $0.15{\times}0.1{\mu}m^2$ and dissipate 22.8 mW per channel.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.10
• /
• pp.15-21
• /
• 2014

In this study, biochemical methane potential test was conducted to estimate ultimate methane and carbon dioxide yield for anaerobic digestion and pretreatment with sewage sludge cake. Two of 0.2 % TS of sewage sludge cakes were treated with 5M NaOH or sonication of 0.51 W/mL during 30 min respectively. Another sample was treated simultaneously with NaOH and sonication in same condition. Then, initial soluble COD increased from 33.1 mg/L to 494 mg/L. After BMP test, methane production ranged from 3.12 and 84.2 mL $CH_4$ per g of Volatile Solid (VS) and 9.2 and 13.5 mL $CO_2$ per g of Volatile Solid (VS) for carbon dioxide. In other tests, injection of nutrient media or sludge supernatant produced 73.1 and 73.8 mL $CH_4$ per g of Volatile Solid (VS) and 11.2 and 13.6 mL $CO_2$ per g of Volatile Solid (VS) respectively. When BMP test finished, 62 % of initial volatile solids decreased to 33.8~45.4 %. Simultaneous pretreatment increased soluble COD, reduction rate of volatile solids and digestion efficiency than those for alkaline and ultrasonic pretreatment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.11
• /
• pp.1-9
• /
• 1972

For a measure against late transplanting, this experiment was conducted to investigate a reasonable seeding rate in nursery bed and a proper nursery size. The treatments applied to this experiment are as follows a) seeding rates: 0.2ι, 0.4ι and 0.6ι per 3.3$m^2$ b) nursery sizes. for 10a-field area: 39.6$m^2$, 49.5$m^2$ and 59.4$m^2$ c) transplanting dates: June 5, June 25 and July 15. The seeding date was April 26 and planting density was determined by the number of sound seedlings based on the combination of seeding rate and nursery size. The results may be summarized as follows: 1. In seedlings both increased nursery period and decreased seeding rate showed a remarkable-increase in plant height, number of leaves, dry matter weight and the ratio of dry weight to plant height. But their number of tillers and live leaves did not show such tendency. 2. Delayed transplanting date shortened culm length and panicle length as well as number of days from transplating to heading and it also delayed heading date. On the other hand the transplanting of 80-day seedlings resulted in premature heading. 3. As a result late transplanting reduced number of spikelets per panicle, maturing rate and 1000-grain weight. In the last analysis it linearly reduced grain yield. The decreasing rate of yield by late transplanting was 15.6% in June 25 plot and 41. 3% in July 15 plot, compared with the yield in June 5 plot. Such a remarkable decrease in yield of the extremely late transplanted plot was mainly due to markedly decreasing number of spikelets per panicle and 1000-grain weight. 4. Both increased seeding rate and nursery size gave a rise in number of tillers per unit area as well as number of transplanting hills but gave a fall in culm length and panicle length. 5. Accordingly, though thick seeded - dense planted plot increased number of panicles per unit area, decrease in number of spikelets per panicle and 1000-grain weight made no differences in yield between thick seeded - dense planted plot and thin seeded - sparse planted one. However, the yield in the thick seeded - dense planted plot transplanted on July 15 was reduced owing to the remarkable decrease in maturing rate and 1000-grain weight. 6. We came to the conclusion that as a measure against the extremely late transplanting the suitable seeding rate was 0.4ι per 3.3$m^2$ and the proper nursery size was 59.4$m^2$ for 10a-field area.

• Korean Journal of Animal Reproduction
• /
• v.24 no.2
• /
• pp.209-216
• /
• 2000

This study was carried out to investigate the effects of breed, age of boar, season, parity and mating system on boar semen characteristics and fertilizing capacity. A total of 4181 sows and 199 boars of Durocs (D), Landraces (L), and Yorkshires (Y) were used for this experiment at Darby Artificicial Insemination Center from 1996 through 1999. Semen volume per ejaculate was largest in Landrace (266.8 $m\ell$), followed by Yorkshire, and was smallest in Duroc. Sperm motility did not show significant differences among the above breeds. Sperm concentration was lowest in Landrace (4.7$\times$10$^{9}$ sperm/$m\ell$) and was highest in Duroc (5.7$\times$10$^{9}$ sperm/$m\ell$). Semen volume per ejaculate according to the age of boars was largest at the age of 2 years, followed by the age of 4 and 3 years, and was smallest at the age of I year. Semen volume per ejaculate according to the season in boars was largest in winter (228.6 $m\ell$), followed by autumn and summer, and was smallest in spring. Sperm concentration was highest in spring (5.9$\times$10$^{9}$ sperm/$m\ell$), followed by summer and winter, and was lowest in autumn. The average litter weight at birth did not show any differences according to the mating type. But the number of pigs born alive per litter was largest (9.5 pigs) in the natural mating ＋ artificial insemination group, followed by the artificial insemination group (9.2 pigs), and was smallest (8.9 pigs) in the natural mating group (P＜0.01). The average litter weight at birth and number of pigs born alive per litter did not show any differences between the natural mating and artificial insemination. The L (♀)$\times$Y (♂) and L (♀)$\times$L (♂) matings show $\varepsilon$ d higher average litter weight at birth and number of pigs born alive per litter than the Y (♀) $\times$ Y (♂) and Y (♀) $\times$ L (♂) matings. The pigs in the 2~6th parities had higher average litter weight at birth and number of pigs born alive per litter than those in the 1 st and 7~9th parities.