• Journal of information and communication convergence engineering
• /
• 제6권2호
• /
• pp.158-163
• /
• 2008

The MB-OFDM based UWB communication system is a personal area network specification aiming to provide 480Mbps peak data rate over 528 MHz spectrum. As the corresponding baseband modem operates at high clock rate, its complexity should be optimized for low power consumption. A set of modem design parameters is suggested including the AD bit width, the clipping level and the quantization level at the Viterbi decoder input as well as the trace-back depth of the Viterbi decoder. The data throughput is used to evaluate the performance of the receiver and a recommended set of design parameter values is presented to aid efficient modem implementation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.234-237
• /
• 2003

The accuracy of channel estimation significantly affects the performance of coherent OFDM receiver. It is desirable to employ a good channel estimator while requiring low implementation complexity. In this paper, we propose a channel estimator that employs a simple two-dimensional (2-D) moving average (MA) filter as the channel estimation filter. The optimum tap size of the 2-D MA FIR filter is analytically designed in the time and frequency domain in association with the channel condition and pilot signal to interference power ratio. The analytic results can be applied to the design of adaptive channel estimator. Finally, the performance of the proposed channel estimator is verified by computer simulation.

• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.215-221
• /
• 2016

We consider a design of a combined quantizer and estimator for distributed systems wherein each node quantizes its measurement without any communication among the nodes and transmits it to a fusion node for estimation. Noting that the quantization partitions minimizing the estimation error are not independently encoded at nodes, we focus on the parameter regions created by the partitions and propose a cluster-based quantization algorithm that iteratively finds a given number of clusters of parameter regions with each region being closer to the corresponding codeword than to the other codewords. We introduce a new metric to determine the distance between codewords and parameter regions. We also discuss that the fusion node can perform an efficient estimation by finding the intersection of the clusters sent from the nodes. We demonstrate through experiments that the proposed design achieves a significant performance gain with a low complexity as compared to the previous designs.

• Journal of Information Technology Applications and Management
• /
• 제27권4호
• /
• pp.37-48
• /
• 2020

This research proposes how to enhance low customer satisfaction with health screening services caused by procedural complexity and limits of health screening. The purpose of this study is to identify sub-components of the service quality provided by general health examination centers. This is a qualitative analysis of in-depth interviews of providers and consumers of medical services. The data were primarily analyzed by affinity diagram, and the data were sorted and analyzed according to the criteria suggested by Donabedian's four components. Four types of quality factors and the health screening service quality components of 39 subordinate items were assessed. Components related to the use of IT facilities comprise a significant amount of the physical factors, and there are high demands for IT facilities among customers.

• ETRI Journal
• /
• 제36권4호
• /
• pp.625-634
• /
• 2014

This paper studies a dual-hop multiple-access relay network where two independent source nodes transmit information to a common destination node with the aid of multiple single-antenna amplify-and-forward relays. Each relay node is subject to an individual power constraint. We focus on the design of distributed beamforming schemes for the relays to support the transmission rate requirements of the two sources. To this end, we first characterize the achievable rate region for this network via solving a sequence of corner point optimization problems proposed in this paper. We also develop several low-complexity suboptimal schemes in closed form. Two inner bounds of the achievable rate region are theoretically shown to be approximately optimal in two special scenarios. Finally, numerical results demonstrate the effectiveness of our proposed approaches.

• 한국통신학회논문지
• /
• 제31권8C호
• /
• pp.806-815
• /
• 2006

디지털 변복조 장치에는 디지털 신호의 표본화 속도를 변환시키는 표본화 속도 변환기(SRC: sample rate converter)가 필요한데, 여기에 사용되는 저역필터의 구현 문제를 연구하였다. 표본화 속도 변환율이 클 경우에는 저역필터의 신호처리 연산량이 많아져서 구현에 부담이 되므로 연산량을 감소시키는 방안이 중요하다. 본 논문에서는 이 필터를 2 단의 직렬 필터로 분할하여 구현하는 설계 방법을 제시하였고, 1 단 구조의 단일 필터로 구현하였을 경우에 비교하여 신호처리 연산량이 감소되는 것을 확인하였다. 표본화 속도 변환율이 증가할수록 2 단분할 방안에 의한 연산량 감소 효과는 증가하며, 변환율이 32 에서는 72 %까지 감소되는 것을 확인하였다. 변환율을 2 단으로 분할함에 있어서도 인수의 조합에 따라서 감소 효과가 다르게 나타났으므로, 여러 변환율에 대하여 최적 성능의 분할율을 조사하였다. 저역필터는 다상 필터 구조를 갖는 FIR 필터를 대상으로 하였으며, 필터계수의 설계는 Parks-McCllelan 알고리즘을 이용하였다.

• 융합보안논문지
• /
• 제3권2호
• /
• pp.33-40
• /
• 2003

불확정 전송 프로토콜의 가장 큰 문제점은 단일 프로토콜로 사용될 경우에는 그 통신량과 계산량이 적지만 암호 프로토콜의 서브프로토콜로 사용될 경우 그 통신량과 계산량이 급증한다는 것이다. 이러한 문제점을 해결하기 위해 통신 트래픽이 적은 시간에 사전 계산을 실행함으로써 통신량과 계산량을 줄일 수 있도록 설계한 검증 가능한 비대화형 불확정 전송 프로토콜을 적용하여 기존에 Fiat-Shamir 서명 방식(Fiat 86)에서 평방 근을 사용하던 방식 대신에 third root를 사용하고 1-out-of-2 불확정 전송을 이용하는 에 관한 공정한 은닉 서명 기법에 사전 계산에 의한 검증 가능한 비대화형 불확정 전송 프로토콜을 적용하여 공정한 은닉 서명 프로토콜을 설계하였다. 또한 제안한 프로토콜을 Lein Harn, VNIOT 프로토콜 방식과 비교하여 분석하고, 프로토콜에 대하여 분석하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권2호
• /
• pp.253-270
• /
• 2013

To achieve accurate localization information, complex algorithms that have high computational complexity are usually implemented. In addition, many of these algorithms have been developed to overcome several limitations, e.g., obstruction interference in multi-path and non-line-of-sight (NLOS) environments. However, localization systems those have complex design experience latency when operating multiple mobile nodes occupying various channels and try to compensate for inaccurate distance values. To operate multiple mobile nodes concurrently, we propose a localization system with both low complexity and high accuracy and that is based on a chirp spread spectrum (CSS) radio. The proposed localization system is composed of accurate ranging values that are analyzed by simple linear regression that utilizes a Big-$O(n^2)$ of only a few data points and an algorithm with a self-calibration feature. The performance of the proposed localization system is verified by means of actual experiments. The results show a mean error of about 1 m and multiple mobile node operation in a $100{\times}35m^2$ environment under NLOS condition.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1991년도 춘계학술대회논문집; 한국해사기술연구소, 대전; 1 Jun. 1991
• /
• pp.153-158
• /
• 1991

Recently, demands on light weight, high strength, and low noise or vibration have led to the design of complicated structural systems. Although finite elements [1], mode synthesis [2], and statistical energy analysis [3] can be used to compute the dynamic response of such systems, the structural complexity has made the interpretation of the results of such analysis difficult. Many researchers in dynamic analysis have sought to further develop existing theories or develop alternate methods to obtain greater insight in the behavior of large massive primary systems (P systems) with connected light secondary systems (S systems). Some recent research includes work by Sackman and Kelly [4], Sackman et al.[5], Der Kiureghian et al.[6], and Igusa and Der Kiureghian [7-9] who have combined mode synthesis concepts, matrix algebraic theory, and perturbation methods for characterizing weakly-coupled structural systems. A major limitation of these works are that they are limited to lumped mass S systems. In this paper, the general ideas in the Refs.[4-9] are used to study continuous S systems and the method to reduce the complexity, studied in the works by Igusa, Achenbach, and Min [10,11], is developed into the frequency window method.

• 한국전자통신학회논문지
• /
• 제8권8호
• /
• pp.1207-1212
• /
• 2013

유한체 연산은 부호이론과 암호학에 널리 쓰이고 있으므로, 유한체 연산의 복잡도를 낮출 수 있는 연산기가 절실하게 필요하다. 그런데 연산기의 복잡도는 유한체의 원소를 표현하는 방법에 달려있다. 복잡도를 줄이기 위해서, 지금까지 알려진 원소를 표현하는 가장 좋은 방법이 최적정규기저를 사용하는 것이다. 본 논문에서는 최적정규기저로 표현된 원소의 곱셈시에 구축되는 곱셈행렬의 1의 개수를 최소화하는 알고리즘을 개발하여 시간과 공간을 최소화하는 곱셈기를 제안하고자 한다.