• Journal of information and communication convergence engineering
• /
• v.4 no.2
• /
• pp.58-61
• /
• 2006

A key issue toward mobile multimedia communications is to create technologies for broadband signal transmission that can support high quality services. Such a broadband mobile communications system should be able to overcome severe distortion caused by timevarying multi-path fading channel, while providing high spectral efficiency and low power consumption. For these reasons, an adaptive suboptimum decision feedback equalizer (DFE) for the single-carrier shortburst transmissions system is considered as one of the feasible solutions. For the performance improvement of the system with the short-burst format including the short training sequence, in this paper, the multiple-training least mean square (MTLMS) based DFE scheme with soft decision feedback is proposed and its performance is investigated in mobile wireless channels throughout computer simulation.

• Annual Conference of KIPS
• /
• 2005.05a
• /
• pp.1593-1596
• /
• 2005

홈 네트워크 기술에서 무선 통신의 중요성이 날로 커져가고 있다. 본 논문에서는 무선 통신 방식으로 구현함에 있어서 중요한 것을 저전력 특성을 가져야 한다는 것이다. 저전력 특성 구현을 위하여 센서, CPU, RF 모듈의 선택에 대해 알아보고, 저전력 무선 보드 센서 설계 및 실제 구현 방식을 제시한다. 저전력 방식으로 설계된 센서는 AA 배터리 2 개로 1 년 이상의 성능을 낼 것으로 판단된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.384-387
• /
• 2010

HONS(Hybrid Open Networking Stack) 는 다양한 무선 센서들을 하나의 네트워크로 서비스할 수 있는 시스템이다. IEEE 802.15.4 표준의 Open 패킷 구조를 정의하여, 다양한 센서를 저전력 멀티-홉 네트워크로 구성할 수 있다. HONS 네트워크는 라우터와 무선 센서로 구성된다. 라우터는 전원을 사용하여 멀티-홉 네트워크의 기본 백본을 형성하며, 무선 센서는 배터리로 저전력 동작을 하여, 라우터가 구성하는 멀티-홉 네트워크에 참여한다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.1
• /
• pp.13-26
• /
• 2016

Service and technology for the future hyper-connected society, which is every information receive through the mobile internet, will be an Internet of Things. Thus, it is mandatory to derive key standardization work item and establish strategy for the global business with the standardization of device and service platform by the application service. In this study, by analyzing the domestic and international market trends, state of technical development, and standardization of technology, we identified the open platform is the stepping stone for achieving the goal which is establishing the virtuous circulation of IoT ecosystem. Also, we defined emphasized key standardization work item for achieving the open platform are network, server, access authentication, billing system, and software platform. After that, we proposed future strategy direction of standardization. This research could be contribute to the IoT service diffusion by realizing IP communication among low power wireless terminals and implementing light-weight standard internet protocol.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3079-3089
• /
• 2015

In this paper, a smart constrained application protocol (CoAP)-based gateway with a border router is proposed for home safety services to remotely monitor the trespass, fire, and indoor air quality. The smart CoAP gateway controls a home safety sensor node with a pyroelectric infrared motion sensor, a fire sensor, a humidity and temperature sensor, and a non-dispersive infrared CO2 sensor and gathers sensing data from them. In addition, it can convert physical sensing data into understandable information and perform packet conversion as a border router for seamless connection between a low-power wireless personal area network (6LoWPAN) and the Internet (IPv6). Implementation and laboratory test results verify the feasibility of the smart CoAP gateway which especially can provide about 97.20% data throughput.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.777-782
• /
• 2005

In this paper, we designed and fabricated a partial discharge (PD) detector to diagnose the soundness of CNCV cables by analyzing PD pulses and to predict discharge locations. The PD detector is consisted of a coupling network with a discharge free capacitor and a detection impedance, a voltage follower and a low noise amplifier. Lower cut-off frequency of the detector is adjusted at 175kHz to block AC voltage and to pass discharge pulse only. The discharge location could be obtained by the time of arrival method using travelling wave propagation theory. In a laboratory test on an eighty meter CV cable, we could position the discharge location within a two meter error.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.47-52
• /
• 2011

In this paper, to evaluate the design properties of 3D optical multimode interference (MMI) couplers with ultracompact width, modal transmission line theory and effective dielectric method are combined with together. A coupling efficiency based on the composed approach is defined, and the coupling length is numerically determined for the design of 3 dB coupler, cross coupler and bar coupler. The simulation result shows that the designed MMI coupler has a low insertion loss and a high splitting ratio.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.6
• /
• pp.255-260
• /
• 2006

Arc Fault Current is an which occurrs in two opposite electrode. In this paper, arc current control algorithm is designed for the interruption of arc fault current which is occurred in the low voltage network. This arc is one of the main causes of electric fire. General arc current sensor has troubles for detecting arc currents, thus we would like to propose the arc current detection method without current sensor. In this parer, arc discharge currents within power lines are being detected through the arc current control algorithm.

• Journal of Sensor Science and Technology
• /
• v.24 no.2
• /
• pp.107-112
• /
• 2015

HIGHT is an 64-bit block cipher, which is suitable for low power and ultra-light implementation that are used in the network that needs the consideration of security aspects. This paper presents a parallel key scheduler that generates the whitening keys and subkeys simultaneously for both encryption and decryption processes. We construct the reverse LFSR and key generation blocks to generate the keys for decryption process. Then, the new key scheduler is made by sharing the common logics for encryption and decryption processes to minimize the increase in hardware complexity. From the simulation results, the logic size is increased 1.31 times compared to the conventional HIGHT. However, the performance of HIGHT including the proposed key scheduler can be increased by two times compared to the conventional counterpart.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.32-34
• /
• 2005

In this paper, an insertcore type PMLSM is proposed to improve the low thrust density of aslotless type PMLSM. Aneural network is applied to enhance thrust and to minimize the detent force caused by both the slot-teeth structure and end-effect. As the resultsof the optimal design, the thrust ripple rate is decreased conspicuously from 10.22[%] to 2.87[%] and the distortion factor of thrust form 5.82[%] to 1.65[%], respectively