• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1469-1479
• /
• 2017

Primary-side regulation (PSR) scheme is widely applied in low power applications, such as cell phone chargers, network adapters, and LED drivers. However, the efficiency and standby power requirements have been improved to a high standard due to the new trends of DOE (Department Of Energy) Level VI and COC (Code Of Conduct specifications) V5. The major drawbacks of PSR include poor regulation due to inaccurate feedback and difficulty in acquiring acceptable regulation. A novel adaptive blanking strategy for constant current and constant voltage regulation is proposed in this paper. An accurate model for the sample blanking time related to transformer leakage inductance and the metal-oxide-semiconductor field-effect transistor (MOSFET) parasitic capacitance is established. The proposed strategy can achieve accurate detection for ultra-low standby power. In addition, numerous control factors are analyzed in detail to eliminate the influence of leakage inductance on the loop stability. A dedicated controller integrated circuit (IC) with a power MOSFET is fabricated to verify the effectiveness of the proposed control strategy. Experimental results demonstrated that the prototype based on the proposed IC has excellent performance.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.4
• /
• pp.272-281
• /
• 2013

This paper presents low power frequency shift keying (FSK) transmitter using all digital PLL (ADPLL) for smart utility network (SUN). In order to operate at low-power and to integrate a small die area, the ADPLL is adopted in transmitter. The phase noise of the ADPLL is improved by using a fine resolution time to digital converter (TDC) and digitally controlled oscillator (DCO). The FSK transmitter is implemented in $0.18{\mu}m$ 1-poly 6-metal CMOS technology. The die area of the transmitter including ADPLL is $3.5mm^2$. The power consumption of the ADPLL is 12.43 mW. And, the power consumptions of the transmitter are 35.36 mW and 65.57 mW when the output power levels are -1.6 dBm and +12 dBm, respectively. Both of them are supplied by 1.8 V voltage source. The frequency resolution of the TDC is 2.7 ps. The effective DCO frequency resolution with the differential MOS varactor and sigma-delta modulator is 2.5 Hz. The phase noise of the ADPLL output at 1.8 GHz is -121.17 dBc/Hz with a 1 MHz offset.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.9
• /
• pp.3172-3193
• /
• 2022

Cognitive radio-simultaneous wireless information and power transfer (CR-SWIPT) has attracted much interest since it can improve both the spectrum and energy efficiency of wireless networks. This paper focuses on the resource sharing between a point-to-point primary system (PRS) and a multiuser multi-antenna cellular cognitive radio system (CRS) containing a large number of cognitive users (CUs). The resource sharing optimization problem is formulated by jointly scheduling CUs and adjusting the transmit power at the cognitive base station (CBS). The effect of accessing CUs' spatial channel correlation on the possible transmit power of the CBS is investigated. Accordingly, we provide a low-complexity suboptimal approach termed the semi-correlated semi-orthogonal user selection (SC-SOUS) algorithm to enhance the spectrum efficiency. In the proposed algorithm, CUs that are highly correlated to the information decoding primary receiver (IPR) and mutually near orthogonal are selected for simultaneous transmission to reduce the interference to the IPR and increase the sum rate of the CRS. We further develop a spatial correlation-based resource sharing (SC-RS) strategy to improve energy sharing performance. CUs nearly orthogonal to the energy harvesting primary receiver (EPR) are chosen as candidates for user selection. Therefore, the EPR can harvest more energy from the CBS so that the energy utilization of the network can improve. Besides, zero-forcing precoding and power control are adopted to eliminate interference within the CRS and meet the transmit power constraints. Simulation results and analysis show that, compared with the existing CU selection methods, the proposed low-complex strategy can enhance both the achievable sum rate of the CRS and the energy sharing capability of the network.

• Journal of Sensor Science and Technology
• /
• v.16 no.4
• /
• pp.247-253
• /
• 2007

Low power consumption sensor network platform (sensor node) for sensor networking with IEEE 802.15.4 protocol was fabricated. The sensor node used ceramic bar type antenna for increasing RF signal performance and decreasing PCB size occupied by antenna. The communication range of the fabricated sensor node was about $20{\sim}30$ m in open environment with 915 MHz frequency bandwidth and well supported by Tiny OS. The sensor node have good connectivity with various external devices by RS-232, I2C, analogue and digital expansion board, hence, this sensor node can be applied to various applications in wireless sensor network and ubiquitous sensor network.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.924-926
• /
• 1997

A high impedance fault(HIF) in a power system could be due to a downed conductor, and is a dangerous situation because the current may be too small to be detected by conventional means. In this paper, HIF(High impedance fault) and LIF(Low impedance fault) detection methods were reviewed. No single defection method can detect all electrical conditions resulting from downed conductor faults, because high impedance fault have arc phenomena, asymmetry and randomness. Neural network are well-suited for solving difficult signal processing and pattern recognition problem. This paper presents the application of artificial neural network(ANN) to detect the HIF and LIF. Test results show that the neural network was able to identify the high impedance fault by real-time operation. Furthermore, neural network was able to discriminate the HIF from the LIF.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.248-252
• /
• 2012

The sensor network standard DASH7 was proposed to improve transmission quality and low power communication. Specifications for the standard are currently being developed, so the security specification has not been firmly implemented. However, without a security specification, a network cannot work due to threats from malicious users. Thus we must ensure confidentiality and authentication of data packets by using a cryptography method. To contribute to the DASH7 security specification, this paper shows the implementation results of network and data link layer security by using advanced encryption standard (AES) counter with CBC-MAC (CCM) over CC430 sensor nodes.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.259-259
• /
• 2004

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.62-73
• /
• 2012

IEEE 802.15.4 standard which has low-speed, low-power, low-cost can be efficiently used in wireless sensor network environment. Among various topologies used in IEEE 802.15.4 standard, a cluster-tree topology which has many nodes in it, transmit delay, energy consumption and data loss due to traffic concentration around the sink node. In this paper, we propose the MRS-DCA algorithm that minimizes conflicts between packets for efficient data transmission, and dynamically allocates the active period for efficient use of limited energy. The MRS-DCA algorithm allocates RP(Reservation Period) to the active period of IEEE 802.15.4 and guarantees reliable data transmission by allocating RP and CAP dynamically which is based on prediction using EWMA. The comparison result shows that the MRS-DCA algorithm reduces power consumption by reducing active period, and increasing transmission rate by avoiding collision.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.89-94
• /
• 2018

This paper investigated the design method of the smart sensor for implementing IoT (Internet of Things) service. The power supply of sensor consistently acquisting data is based on the energy harvesting technology and designed with piezoelectric transducer not affected by surrounding circumstances. The wireless communication interface for the transmission of data is designed with BLE (Bluetooth Low Energy). BLE is highly adequate wireless communication technology for low power consumption and short distance wireless communication. The main application of BLE is beacon whose usage range is extended from O2O (Online to Offline) service, navigator based on indoor positioning technology, and anti-theft/lost child prevention service to mobile game. This paper studied the method to extend wireless coverage for complementing the short wireless transmission distance of BLE. The wireless sensor network based on CATV network is proposed for the easy construction of BLE sensor network and extended wireless coverage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.318-328
• /
• 2011

Stage-level reconfigurable chip multiprocessor (CMP) aims to achieve highly reliable and fault tolerant computing by using interwoven pipeline stages and on-chip interconnect for communicating with each other. The existing crossbar-switch based stage-level reconfigurable CMPs offer high reliability at the cost of significant area/power overheads. These overheads make realizing large CMPs prohibitive due to the area and power consumed by heavy interconnection networks. On other hand, area/power-efficient architectures offer less reliability and inefficient stage-level resource utilization. In this paper, I propose a hierarchical multiplexing interconnection structure in lieu of crossbar interconnect to design area/power-efficient stage-level reconfigurable CMP. The proposed approach is able to keep the reliability offered by the crossbar-switch while reducing the area and power overheads. Experimental results show that the proposed approach reduces area by up to 21% and power by up to 32% when compared with the crossbar-switch based interconnection network.