• Title/Summary/Keyword: low body shapes

Search Result 61, Processing Time 0.03 seconds

A Study on the Comparison of Foot Type for the Men in Their 20's and 60's - With the Usage of Size Korea's 3-Dimensional Measurement Data - (20대와 60대 남성의 발 유형 비교 연구 - Size Korea의 3차원 측정 데이터를 이용하여 -)

  • Seok, Hye-Jung;Park, Ji-Eun;Han, Seung-Hee;Kim, Deuk-Ha
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.11 no.2
    • /
    • pp.183-195
    • /
    • 2009
  • In this study, foot shapes were compared between the men in their 20's and 60's, with the application of 3-dimensional measurement data, and the classification was established in consideration of each of their features. The results are as follows: 1. The investigation into the differences between the groups for the 3-dimensional measurement items of the men in their 20's and 60's indicated that those in their 20's had larger values than those in the 60's age group for all of the length items, while those in the 60's age group had larger values for all of the angle items. 2. The analysis of the constituting factors for the feet of those in their 60's and 20's resulted in the 7 items for the 20's age group and 8 items for those in the 60's age group. 3. The comparison of foot classifications for the 60's age group and 20's age group presented 3 types each for both groups, but the features of each type was different. To examine each characteristic by each type and age group, following can be determined of the 60's age group. Type 1 had a thick instep, high malleolus position and heel and a thick formed ankle. Type 2 the entire foot was small, and the big toe was formed in such a way that it tened to bend toward the inside. When the whole size compared with similar Type 1, Type 3 had a low instep, a low heel, the big toe did not bend and ankle form was thin. The following can be determined of the 20's age group. Type 1 had narrow width a thin ankle and the big toe was formed in such a way that it bended toward the inside. Compared with length, Type 2 had wide width and a thick ankle. Type 3 had a larger overall size, thick instep and wide and the toe was big, but the characteristic of inside and outside of a malleolus position was low and the big toe's form showed no tendencies to bend.

  • PDF

Corrosion Characteristics of Cell-Covered Ternary Ti-Nb-Ta Alloy for Biomaterials

  • Kim, W.G.;Yu, J.W.;Choe, H.C.;Ko, Y.M.;Park, G.H.
    • Corrosion Science and Technology
    • /
    • v.8 no.2
    • /
    • pp.62-67
    • /
    • 2009
  • Ti and Ti-alloys have good biocompatibility, appropriate mechanical properties and excellent corrosion resistance. However, the widely used Ti-6Al-4V is found to release toxic ions (Al and V) into the body, leading to undesirable long-term effects. Ti-6Al-4V has much higher elastic modulus (100 GPa) than cortical bone (20 GPa). Therefore, titanium alloys with low elastic modulus have been developed as biomaterials to minimize stress shielding. The electrochemical behavior of surface-modified and MC3T3-E1 cell-cultured Ti-30(Nb,Ta) alloys with low elastic modulus have been investigated using various electrochemical methods. Surfaces of test samples were treated as follows: $0.3{\mu}m$ polished; $25{\mu}m$, $50{\mu}m$ and $125{\mu}m$ sandblasted. Specimen surfaces were cultured with MC3T3-E1 cells for 2 days. Average surface roughness ($R_a$) and morphology of specimens were determined using a surface profilometer, OM, and FE-SEM. Corrosion behavior was investigated using a potentiostat(EG&G PARSTAT 2273), and electrochemical impedance spectroscopy was performed (10 mHz to 100 kHz) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The microstructures of the Ti-30(Ta,Nb) alloys had a needle-like appearance. The $R_a$ of polished Ti-30Ta and Ti-30Nb alloys was lower than that of the sandblasted Ti alloy. Cultured cells displayed round shapes. For polished alloy samples, cells were well-cultured on all surfaces compared to sandblasted alloy samples. In sandblasted and cell-cultured Ti-30(Nb,Ta) alloy, the pitting potential decreased and passive current density increased as $R_a$ increased. Anodic polarization curves of cell-cultured Ti alloys showed unstable behavior in the passive region compared to non-cell-cultured alloys. From impedance tests of sandblasted and cell-cultured alloys, the polarization resistance decreased as $R_a$ increased, whereas, $R_a$ for cell-cultured Ti alloys increased compared to non-cell-cultured Ti alloys.

Studies on the Propagation of the Freshwater Prawn, Macrobrachium nipponense (De Haan) Reared in the Laboratory 2. Life History and Seedling Production (담수산 새우, Macrobrachium nipponense (De Haan)의 증${\cdot}$양식에 관한 생물학적 기초연구 2. 생활사 및 종묘생산에 관한 연구)

  • KWON Chin-Soo;LEE Bok-Kyu
    • Journal of Aquaculture
    • /
    • v.5 no.1
    • /
    • pp.29-67
    • /
    • 1992
  • Life cycle and seed production of the freshwater prawn, Macrobrachium nipponense, were studied and the results are as follows : 1. Larval development : Embryos hatched out as zoea larvae of 2.06 mm in mean body length. The larvae passed through 9 zoea stages in $15{\~}20$ days and then metamorphosed into postlarvae measuring 5.68 mm in mean body length. Each zoea stage can be identified based on the shapes of the first and second antennae, exo- and endopodites of the first and second pereiopods, telson and maxillae. 2. Environmental requirements of zoea larvae : Zoea larvae grew healthy when fed with Artemia nauplii. Metamorphosing rate was $65{\~}72{\%}$ at $26{\~}28\%$ and $7.85{\~}8.28\%_{\circ}Cl.$. The relationship between the zoeal period (Y in days) and water temperature (X in $^{\circ}C$) is expressed as Y=46.0900-0.9673X. Zoeas showed best survival in a water temperature range of $26{\~}32^{\circ}C$ (optimum temperature $28^{\circ}C$), at which the metamorphosing rate into postlarvae was $54{\~}72\%$ The zoeas survived more successfully in chlorinity range of $4.12{\~}14.08{\%_{\circ}}Cl.$, (optimum chlorinity $7.6{\~}11.6\;{\%_{\circ}}Cl.$.), at which the metamorphosing rate was $42{\~}76{\%}$. The whole zoeal stages tended to be longer in proportion as the chlorinity deviated from the optimum range and particularly toward high chlorinity. Zoeas at all stages could not tolerate in the freshwater. 3. Environmental requirements of postlarvae and juveniles : Postlarvae showed normal growth at water temperatures between $24{\~}32^{\circ}C$ (optimun temperature $26{\~}28^{\circ}$. The survival rate up to the juvenile stage was $41{\~}63{\%}$. Water temperatures below $24^{\circ}C$ and above $32^{\circ}$ resulted in lower growth, and postlarvae scarcely grew at below $17^{\circ}C$. Cannibalism tended to occur more frequently under optimum range of temperatures. The range of chlorinity for normal growth of postlarvae and juveniles was from 0.00 (freshwater) to $11.24{\%_{\circ}}Cl.$, at which the survival rate was $32{\~}35\%$. The postlarvae grew more successfully in low chlorinities, and the best growth was found at $0.00\~2.21{\%_{\circ}}Cl.$. The postlarvae and juveniles showed better growth in freshwater but did not survive in normal sea water. 4. Feeding effect of diet on zoea Ilarvae : Zoea larvae were successfully survived and metamorposed into postlarvae when fed commercial artificial plankton, rotifers, and Artemia nauplii in the aquaria. However, the zoea larvae that were fed Artemia nauplii and reared in Chlorella mixed green water showed better results. The rate of metamorphosis was $68\~{\%}75$. The larvae fed cow live powder, egg powder, and Chlorella alone did not survive. 5. Diets of postlarvae, juveniles and adults : Artemia nauplii and/or copepods were good food for postlarvae. Juveniles and adults were successfully fed fish or shellfish flesh, annelids, corn grain, pelleted feed along with viscera of domestic animals or fruits. 6. Growth of postlarvae, juveniles and adults : Under favorable conditions, postlarvae molted every five or six days and attained to the juvenile stage within two months and they reached 1.78 cm in body length and 0.17 g in body weight. The juveniles grew to 3.52 cm in body length and 1.07 g in body weight in about four months. Their sexes became determinable based on the appearance of male's rudimental processes (a secondary sex character) on the endopodites of second pereiopods of males. The males commonly reached sexual maturity in seven months after attaining the postlarvae stage and they grew to 5.65 cm in body length and 3.41 g in body weight. Whereas the females attained sexual maturity within six to seven months, when they measured 4.93 cm in body length and 2.43 g in body weight. Nine or ten months after hatching, the males grew $6.62{\~}7.14$ cm in body length and $6.68{\~}8.36$ g in body weight, while females became $5.58{\~}6.08$ cm and $4.04{\~}5.54$ g. 7. Stocking density : The maximum stocking density in aquaria for successful survival and growth was $60{\~}100$ individuals/$\ell$ for zoeas in 30-days rearing (survival rate to postlarvae, $73{\~}80{\%}$) ; $100{\~}300$ individuals/$m^2$ for postlarvae of 0.57 cm in body length (survival rate for 120 days, $78{\~}85{\%}$) ; $40{\~}60$ individuals/$m^2$ for juveniles of 2.72 cm in body length (survival rate for 120 days, $63{\~}90{\%}$) : $20{\~}40$ individuals/$m^2$ for young prawns of 5.2 cm in body length (survival rate for 120 days, $62\~90{\%}$) ; and $10\~30$ individuals/$m^2$ for adults of 6.1 cm in body length (survival rate for 60 days, $73\~100{\%}$). The stocking density of juveniles, youngs and adults could be increased up to twice by providing shelters.

  • PDF

A Study on the Actual Conditions of and Satisfaction with the Existed Female Dress Forms Usage (국내 여성용 인대 사용 실태 및 만족도에 관한 연구)

  • Park Gin-Ah;Lee Hye-Young;Choi Jin-Hee
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.30 no.3 s.151
    • /
    • pp.378-385
    • /
    • 2006
  • To release fashion trends in an efficient way, many of the apparel business and fashion educational institutes in land adopt fashion shows employing fashion models. Modeling rather than flat pattern making realizes the majority of the complicated design works for the fashion shows. However, for the different measurements between the dress form and the real human model, problems often occur during the modeling and fitting processes. Researches on the standard dress form development representing professional fashion models' features are therefore in urgent need to enable the related apparel business and fashion institutes to make appropriate use of the dress form in their jobs. The study has been conducted as a preliminary study using a questionnaire method ultimately to develop the female dress form. A questionnaire in the research aimed at an investigation into the actual conditions of and satisfaction with the usage and the body measurements of existed dress forms. Approximately 30 fashion-related educational institutes and 10 apparel companies responded to the survey. Data derived from the survey was analyzed using SPSS version 10.1, the statistics tool. The results throughout the research were discussed in terms of largely three categories that are; (1) the general conditions of the usage of the dress form to prepare fashion shows: e.g. the frequency of holding the fashion show in an annual term, the proportion of professional and amateur models employed for the fashion show, the methods to construct garments, types and number of dress forms utilized and etc.; (2) factors considered to purchase the dress form e.g. its functionality, shapes, sizes, duration, price, A/S condition and etc.; and(3) satisfaction with the similarity between the dress form and the human body in the relation to the body measurements. Measurements in length wise, front and back waist lengths, neck to bust point on the dress forms were apparently differed from the ones of the actual body. In particular, differed torso length measurements cause the problem to have to alter the whole silhouette, consequently, the resultant patterns as well. In girth measurements, in order of bust and waist girths, the satisfaction was low.

Investigation on the Thermal Deformation Patterns of Packages Used for Ready-to-eat Food During Microwave Heating (즉석 섭취식품의 전자레인지 가열 시 포장재의 열 변형 패턴 조사)

  • Lee, Hwa Shin;Cho, Ah Reum;Moon, Sang Kwon;Yoon, Chan Suk;Lee, Keun Taik
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.21 no.3
    • /
    • pp.97-106
    • /
    • 2015
  • Thermal deformation of packaging materials was observed in some ready-to-eat food products for microwave use. Therefore, the deformation patterns depending on packaging types and shapes of 9 domestic and 11 foreign products after microwave heating were investigated. Among the domestic and foreign products, thermal deformations of packaging material were observed in 5 and 8 samples, respectively. Besides, thermal deformation occurred on the lid and cup body of tray filled with a spicy chicken sauce after having microwaved where previously no deformation had been observed with other food types. No consistent results of thermal deformation were obtained by the analysis of salinity, brix, pH and viscosity of RTE products for microwave heating. However, thermal deformations of packages were less found in the packages used for the RTE foods contained very high or low viscosity than those with medium viscosity. Furthermore, the degree of thermal deformations was dependent on the food composition and shape as well as package type. In order to prevent the thermal deformation of packaging materials, therefore, technological advances and further studies are required to develop the heat-resistant packaging system and to improve the non-uniformity during microwave heating of RTE foods.

Consideration for Historical Application of Augen Gneiss and Petrographic Characteristics for Rock Properties of Donghachong Tomb from Royal Tombs of Neungsanri in Buyeo, Korea (부여 능산리고분군 동하총 석재의 암석기재적 특성과 안구상편마암의 역사적 활용성 고찰)

  • Park, Jun Hyoung;Lee, Gyu Hye;Lee, Chan Hee
    • Economic and Environmental Geology
    • /
    • v.52 no.1
    • /
    • pp.91-106
    • /
    • 2019
  • The Donghachong tomb from Royal Tombs at Neungsanri is composed of 15 sides including the floor, and the most highly proportion of rock, two-mica granite, are used on the 7 sides (46.6%). Also, augen gneiss consist with another 3 sides (20.0%), and each of the remaining 3 sides (6.7%) are made up of granodiorite, gneissous granite and leucocratic granite, all of which were used to comprise the tabural stone. Meanwhile, the two floors of the burial chamber and the front chamber, are made up of brick-shaped amphibole schist (13.3%). These rocks are occurred in the Buyeo area and their provenance sites are located at the side of Guemgang river. The Memorial Stone for Liu Renyuen in Tang China is a typical augen gneiss showing distinct schistosity and augen texture. This rock has the same petrographic characteristics with the rocks used to build the Donghachong tomb, Sanjikri dolmens and Setapri pagoda in Buyeo. This augen gneiss is distributed from the Jeungsanri in Buyeo to Dukjiri in Gongju as a large scaled rock body, and where currently are the quarries to produce stone aggregates, garden and landscape rocks. Thus, it is highly probable that the site around Buyeo was the source area of augen gneisses since the Bronze Age. However, while augen gneiss is easier to form into shapes it should have disadvantages when it comes to painting on the tomb wall because of their petrographic characteristics of low strength and dark color. Therefore, it is very intriguing to investigate which transportation method the people of Baekje chose with consideration of the distance and terrain, efficiency and convenience.

Recent Progress in Micro In-Mold Process Technologies and Their Applications (마이크로 인몰드 공정기술 기반 전자소자 제조 및 응용)

  • Sung Hyun Kim;Young Woo Kwon;Suck Won Hong
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.30 no.2
    • /
    • pp.1-12
    • /
    • 2023
  • In the current era of the global mobile smart device revolution, electronic devices are required in all spaces that people interact with. The establishment of the internet of things (IoT) among smart devices has been recognized as a crucial objective to advance towards creating a comfortable and sustainable future society. In-mold electronic (IME) processes have gained significant industrial significance due to their ability to utilize conventional high-volume methods, which involve printing functional inks on 2D substrates, thermoforming them into 3D shapes, and injection-molded, manufacturing low-cost, lightweight, and functional components or devices. In this article, we provide an overview of IME and its latest advances in application. We review biomimetic nanomaterials for constructing self-supporting biosensor electronic materials on the body, energy storage devices, self-powered devices, and bio-monitoring technology from the perspective of in-mold electronic devices. We anticipate that IME device technology will play a critical role in establishing a human-machine interface (HMI) by converging with the rapidly growing flexible printed electronics technology, which is an integral component of the fourth industrial revolution.

A Study on the Fengshui Shapes of the Four Propitious Sites Recorded in The Canonical Scripture (『전경』에 기록된 사명당(四明堂)의 풍수 물형(物形) 연구)

  • Shin Young-dae
    • Journal of the Daesoon Academy of Sciences
    • /
    • v.41
    • /
    • pp.133-178
    • /
    • 2022
  • This study investigates if four propitious sites (四明堂, sa myeongdang) identified in Daesoon Jinrihoe's The Canonical Scripture correspond with the orthodox descriptions of dragon, energy hub, sand, and water (龍穴砂水, yong hyeol sa su) which are held by Fengshui as conditions necessary for that specific designation. In this study, these conditions, based on the shape of the site-formations, were observed via through on-site surveys and the application of the theories presented by traditional books on Fengshui. First, the dragon veins (龍脈, yongmaek) of the energy hub of the Five Immortals Playing Baduk (五仙圍碁穴 oseonwigi- hyeol) on Mount Hoemun in Sunchang consists of solid soil, is like a spiderweb, rises and lays prone, winds in every direction, and looks almost disconnected while actually remaining connected. Second, the Fengshui characteristics of the energy hub of Worship Held by Buddhist Monks from Abroad (胡僧禮佛穴, hoseungyebul- hyeol) on Mount Seungdal in Muan is that the branching feet (枝脚 jigak) support the mountain range by forming a valley to the left and right of the dragon veins that stretch from the peak of Mount Seungdal. Also, the direction-changing helm (橈棹 yodo) supports the mountain range solidly can be said to be well-developed. It is likewise noted that there is an excellent change in dragon veins in that exhibit curvature that spans being high, low, rising, and lying. This makes it appear as though the dragon is wriggling back and forth. Third, the state of the energy hub of Celestial Maidens Weaving Silk (仙女織錦穴, seonnyojikgeum-hyeol) on Sonryong Ridge in Jangseong County demonstrates overall harmony between mountain and water as it is near Mount Ju and Mount An and has a solid water outlet to which it is tightly fastened such that its energy does not leak out. Meanwhile, the positioning of its blue dragon of the east, red phoenix of the south, white tiger of the west, and black tortoise of the north is so intimate that its long flow can be said to be spinning. The Songryong Ridge area where energy hub was formed between soil and bedrock is the right land for a great favored location as it corresponds with Fengshui logic in an exemplary manner. Fourth, the Fengshui characteristics of the energy hub of Subjects Receiving the Imperial Command (群臣奉詔穴, gunshinbongjo-hyeol) at Baerye-jeon Field in Taein can be described as embracing the village snuggly as it centers around Mount Wangja, and its blue dragon and white tiger respond to each other. Additionally, a clear distinction between host and guest is noticeable in the positions of Mount Ju and Mount An. The flowing body of water in front of the village wraps around that village as a Horizontal Water Formation (橫水局, hoengsuguk), and vigorous vapor from the earth draws breath as the yin-yang energy of the landscape courses through the earth. As dragon veins, the range of the mountain, are like the blood vessels within the human body and the dragon is compared to the limbs, the energy hub of Subjects Receiving the Imperial Command at Baerye-jeon Field in Taein can be identified as a favored location that was formed directly by the sky and earth.

Archaeometric Significant and Manufacturing Characteristics of Comb-Pattern Pottery from the Daejuk-ri Shell Midden, Seosan, Korea (서산 대죽리 패총 출토 빗살무늬토기의 제작특성과 고고과학적 의미)

  • AN Deogim;LEE Chan Hee
    • Korean Journal of Heritage: History & Science
    • /
    • v.55 no.4
    • /
    • pp.138-164
    • /
    • 2022
  • The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.

"A Study on Hebrews Clothing in the Old Testament" - Especially on Hair Styles, Headgears, Footwear and Personal Ornaments - (구약성서(舊約聖書)에 나타난 히브리인의 복식(服飾) - 두식(頭飾), 신발 및 장신구(裝身具) 중심(中心)으로 -)

  • Park, Chan-Boo
    • Journal of the Korean Society of Costume
    • /
    • v.10
    • /
    • pp.63-80
    • /
    • 1986
  • The Old Testament cotains mention of the history of creation and clothing in ancient Hebrew. This study dealt with Hebrew dress customs especially aimed at the manners of their hair styles, headgears, footwear and personal ornaments. References are Korean Revised Version, English King James Version and Revised Standard Version. There is little mention of hair styles and headgears in the Old Testament. Some sort of turban was worn by priests, and soldiers protected themselves with helmets, but most Israelitish men went bareheaded except on special occasions and often wear simple headbands. It was more common for women to use headwear of some type-turbans, scarves, and veils concealing the face. The veil was the distinctive female wearing apparel. All females, with the exception of maidservants and women in a low condition of life, wore a veil. It was the custom for women to wear a veil entirely covering their head in the public. Through most of the Old Testament periods long and thick hair was admired on men and women alike. The Hebrews were proud to have thick and abundant long hair, and they gave much attention to the care of their hair. The caring of hair was deeply related to their rituals. Nazirites never took a razor to their hair during his vow-days, but instead let it grow long, as an offering to God. Men would not cut their beards, but allow them to grow long. The Israelites' standard footwear was a pair of simple leather sandals. This was one of the items of clothing not highly prized. In a colloquial saying of the time, a pair of shoes signified something of small value, and to be barefoot except in times of mourning or on holy place, was a sign either of extreme poverty or humiliation, as in the case of war prisoners. Because precious stones were not mined in the Palestine-Syria region, Hebrews imported them from foreign country. They were consumer-to a large degree limited by their very modest standard of living-but not producers. Hebrews liked the precious stones and were motivated to acquire and wear jewels. Besides their use for adornment and as gifts, the precious or semiprecious stones were regarded by Jews of property. The Hebrews were not innovators in the field of decorative arts. The prohibition of the Law against making any "graven image" precluded the development of painting, sculpture, and other forms of representational art. Jewish men did not indulge in extravagances of dress, and there was little ornamentation among them. Men wore a signet ring on their right hand or sometimes suspended by a cord or chain around the neck. The necklaces, when worn by a male, also bore any symbol of his authority. Bracelets were extremely popular with both men and women, men usually preferring to wear them on their upper arms. The girdle was a very useful part of a man's clothing. It was used as a waist belt, or used to fasten a man's sword to his body, or served as a pouch in which to keep money and other things. Men often carried a cane or staff, which would be ornamented at the top. Among the women there was more apt to be ornamentation than among the men. Hebrew women liked to deck themselves with jewels, and ornamentation of the bride were specially luxurious and numerous. They wore rings on their fingers or On toes, ankle rings, earrings, nosering, necklace, bracelets. Their shapes were of cresent, waterdrops, scarab, insect, animal or plant. Sometimes those were used as amulets. They were made of ceramics, gold, silver, bronze, iron, and various precious stones which were mostly imported from Egypt and Sinai peninsular. Hebrews were given many religious regulations by Moses Law on their hair, headgears, sandals and ornamentation. Their clothing were deeply related with their customs especially with their religions and rituals. Hebrew religion was of monotheism and of revealed religion. Their religious leaders, the prophets who was inspired by God might need such many religious regulations to lead the idol oriented people to God through them.

  • PDF