• The Korean Journal of Food And Nutrition
• /
• v.11 no.1
• /
• pp.87-98
• /
• 1998

This study was conducted to investigate Osteoporosis on the effect of dietary factors and past young age period's dairy products consumption on BMD in 170 postmenopausal Korean women without diagnosed disease. Bone mineral density(BMD) of lumbar spine was investigated by dual energy X-ray absorptiometry. Dietary assesment of the subjects were measured by Cognitive Food Frequency Recall method. The measurements of group average were 57.9kg of body weight, 36.73 of BMI(Body Mass Index), 2103.3㎉ of energy, 638.7mg of dietary calcium, 70.3g of protein, and 10.58mg of iron. Nutrient intake levels were similar to or more than the level of Korean Recommended Dietary Allowances. Bone Mineral Density(BMD) of Lumbar spine(L2-L4) of group average was 0.912g/$\textrm{cm}^2$, and under 50 yr's 1,02g/$\textrm{cm}^2$, 50~54 yr's 0.92g/$\textrm{cm}^2$, 55~59 yr's 0.85g/$\textrm{cm}^2$, over 60 yr's 0.85g/$\textrm{cm}^2$, had been getting low degree on aging. BMD of the Lumbar spine was positively correlated with calorie, body weight, dietary calcium, protein, phosphorus and serum albumin. Past dairy products consumption experiment was highly significant on BMD in teenage period(R square = 26, p-value 0.0031). Particularly in over 60 yr group, the correlations between BMD and past dairy products consumption in teenage period had shown highly significance(r=0.48, p<0.02). 55~59 yr age group had also positive correlation(R squae = 0.29, p<0.05). This results confirm that the most effective way of preventing osteoporosis and the fractures is to maximize peak bone mass in early life and to minimize bone loss through the balanced intake of Ca and other nutrients and regular physical activity.

• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.583-597
• /
• 2014

Fire caused by heater has various causes as many as the types of heater. also, lots of damage of human life and property loss are caused, since annually continuous fire accident by heater in traditional market is frequently occurring. There are not many cases of fire due to heater in most of residential facilities such as general house, apartments, etc., because they are supplied with heating boiler, however the restaurant, store and office of the market, sports center, factory, workplace, etc. still use heater, e.g. oilstove, electric heater, etc., so that they are exposed to fire hazard. Also, when investigating the number of fire due to heater, it was analyzed to occur in order of home boiler, charcoal stove, oilstove, gas heater/stove, electric stove/heater, the number of fire per human life damage was analyzed in order of gas heater/stove, oil heater/stove, electric heater/stove, briquette/coal heater. Also, gas and oil related heater were analyzed to have low frequency, however, with high fire intensity. Therefore, this research aimed at considering more scientific fire inspection and identification approach by reenacting and reviewing fire outbreak possibility caused by combustibles' contact and conductivity under the normal condition and abnormal condition in respect of ignition hazard, i.e. minimum ignition temperature, carbonization degree and heat flux along with it, due to oilstove and electric stove, which are still frequently used in public use facility, traditional market, and, of which actual fire occurrence is the most frequent. As the result of reenact test, ignition hazard appeared very small, as long as enough heat storage condition is not made in both test objects(oilstove/electric stove), however carbonization condition was analyzed to be proceeded per each part respectively. Eventually, transition to fire is the ignition due to heat storage, so that it was analyzed to ignite when minimum heat storage temperature condition of fire place is over $500^{\circ}C$. Particularly, in case of quartz pipe, the heating element of electric stove, it is rapidly heated over the temperature of $600^{\circ}C$ within the shortest time(10sec), so that the heat flux of this appears 6.26kW/m2, which was analyzed to result in damage of thermal PVC cable and second-degree burn in human body. Also, the researcher recognized that the temperature change along with Geometric View Factor and Fire Load, which display decrease of heat, are also important variables to be considered, along with distance change besides temperature condition. Therefore, the researcher considers that a manual of careful fire inspection and identification on this is necessary, also, expects that scientific and rational efforts of this research can contribute to establish manual composition and theoretical basis on henceforth fire inspection and identification.

• Korean Security Journal
• /
• no.21
• /
• pp.155-175
• /
• 2009

RFID that provide automatic identification by reading a tag attached to material through radio frequency without direct touch has some specification, such as rapid identification, long distance identification and penetration, so it is being used for distribution, transportation and safety by using the frequency of 125KHz, 134KHz, 13.56MHz, 433.92MHz, 900MHz, and 2.45GHz. Also it is one of main part of Ubiquitous that means connecting to net-work any time and any place they want. RFID is expected to be new growth industry worldwide, so Korean government think it as prospective field and promote research project and exhibition business program to linked with industry effectively. RFID could be used for access control of person and vehicle according to section and for personal certify with password. RFID can provide more confident security than magnetic card, so it could be used to prevent forgery of register card, passport and the others. Active RFID could be used for protecting operation service using it's long distance date transmission by application with positioning system. And RFID's identification and tracking function can provide effective visitor management through visitor's register, personal identification, position check and can control visitor's movement in the secure area without their approval. Also RFID can make possible of the efficient management and prevention of loss of carrying equipments and others. RFID could be applied to copying machine to manager and control it's user, copying quantity and It could provide some function such as observation of copy content, access control of user. RFID tag adhered to small storage device prevent carrying out of item using the position tracking function and control carrying-in and carrying-out of material efficiently. magnetic card and smart card have been doing good job in identification and control of person, but RFID can do above functions. RFID is very useful device but we should consider the prevention of privacy during its application.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.65-73
• /
• 1984

To assess the status of industrial injuries, a large scale textile company located around Taegu city was selected. And it was investigated from January 1981 to December 1982. After the department for workers safety was established, frequency rate of injury was 9.70 in 1981 and 4.15 in 1982, incidence rate per 1,000 workers was 27.11 in 1981 and 12.96 in 1982, and then, intensity rate was 0.33 in 1981 and 0.01 in 1982. The average duration of working loss was 36.64 days in 1981 and 3.34 in 1982. The incidence rate per 100 workers was 2.3 in annual average, 2.7 in men and 2.0 in women. The monthly incidence rate per 1,000 workers was highest as 3.6 in June; daily incidence rate, lowest as 1.8 on Sunday; and the highest as 14.7 from 10 to 12 o'clock in a day. The frequency by injured parts of body was highest as 42.3% on finger and 14.4% on the other part of hand, and the lower extremities as 14.4% followed. According to the kind of injuries, the laceration was the highest as 46.1%, the next was contusion as 15.4%, and the third was superficial injuries as 6.7%, According to the cause of injuries, the machinery accidents showed the highest as 47.1% and the accidents due to hand tool followed as 16.3%. By underlying cause of injuries, the environmental factors were 13.5% and the human factors 86.5%. The psychologic factors among human factors were the most common as 60.6%.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.4 no.1
• /
• pp.18-27
• /
• 2001

Purpose: The aims of this study are to investigate the effect of the eradication of H. pylori on histological change of gastric mucosa in children with H. pylori gastritis and to determine whether the histological grading by the Sydney system is valuable in predicting the effect of treatment. Methods: 1) Histological scores by the Sydney system and the endoscopic characteristics were assessed before and at least four weeks after anti-H. pylori therapy in 42 children with H. pylori gastritis. 2) In 32 children treated with omeprazole, amoxicillin and clarithromycin (OAC), pretreatment histological scores and endoscopic findings were compared between the eradicated and the noneradicated to evaluate their predictive value for the successful eradication. Results: 1) In the eradicated (27 cases), nodular gastritis significantly decreased from 89% to 63% (p<0.05). There was an significant improvement in the mean activity score from 2.06 before treatment to 0.24 after treatment (p<0.01). The mean inflammatory score also improved from 2.61 before treatment to 1.89 after treatment (p<0.05). Lymphoid follicles significantly decreased from 48% to 15% (p<0.05). Epithelial damage improved in all 4 cases. But in the noneradicated (15 cases), there was no significant change in the frequency of nodular gastritis, the mean activity score, the mean inflammatory score and the frequency of the lymphoid follicles. 2) In 32 children treated with OAC, there was a tendency that the higher was the pretreatment score of the bacterial density, the lower was the eradication rate of H. pylori (p=0.072). Conclusion: The loss of the polymorphonuclear cell infiltration is the most prominent histological change after successful eradication. There may be negative correlation of the grade of the bacterial density with the success rate of the anti-H. pylori therapy.

• Science of Emotion and Sensibility
• /
• v.9 no.2
• /
• pp.111-118
• /
• 2006

The purpose of the study is to examine the effects of the positive menial stress, eustress, on autonomic nervous system(ANS) and human health. For this, we analyzed heart rate variability(HRV) parameters, the most promising markers of ANS function to assess the changes of emotional and physiological states of human body. We measured HRV Signal of World Cup group(281 male subjects: $29.8{\pm}5.6yr$., 187 female subjects: $29.0{\pm}5.4yr$.) in two stadiums at least an hour before the game during '2002 FIFA World Cup Korea/Japan' event. We also measured control group's(331 male subjects: $30.9{\pm}4.7 yr$., 344 female subjects: $30.2{\pm}5.2 yr$.) in the health promotion centers in two university hospitals at least a month before and after the world cup event period. Considering physiological differences between males and females, the data analysis was applied to 'male group' and 'female group' separately. As a result, some tendency was observed that is different from what we have known as the stress reaction. In general, all parameter values except that of mean heart rate tend to decrease under stressed condition. However, under eustressed condition, both heart rate and standard deviation of the Normal to Normal intervals(SDNN) were higher then those of normal condition(p<0.05). Especially, in case of female group, contrary to distressed condition, every frequency-domain powers showed tile higher value(p<0.05, p<0.001). Considering that decrease of HRV indicates the loss of one's health, the increase of SDNN and frequency parameters means that homeostasis control mechanism of ANS is functioning positively. Accordingly, induction of eustress from international sports event may affect positively to the people's health.

• Journal of Genetic Medicine
• /
• v.8 no.1
• /
• pp.44-52
• /
• 2011

Purpose: Cytogenetic analysis of spontaneous abortions (SABs) provides valuable information to establish the causes of fetal loss, information that is essential to provide accurate reproductive and genetic counseling couples. Such analysis also provides information on the frequencies and types of chromosomal abnormalities and associated risks of recurrence. However, there have only been a few reports of chromosomal abnormalities in small samples of SABs in the Korean population. Here, we report the incidence and spectrum of chromosomal abnormalities for cases of 470 SAB in Korea. Material and Methods: Between 2005 and 2010, a total of 470 products of conception (POC) resulting from SABs were submitted to our laboratory for cytogenetic analysis from various medical sites in Korea. The incidences and types of specific chromosomal abnormalities were determined. The abnormalities were distinguished by gestational age at the time of SAB and by maternal age. Results: The frequency of chromosomal abnormalities in POCs was 54.3% (255/470), including 228 (89.3%) numerical and 27 (10.7%: 3 balanced and 24 unbalanced) structural abnormalities. Among the numerical abnormalities, trisomy was predominant (67.0%), followed by monosomy X (12.5%), polyploidy (8.2%), triple X (0.8%), and autosomal monosomy (0.8%). The overall sex ratio (male: female) among the 470 POCs with normal and abnormal karyotypes were 0.58 and 0.65, respectively. Trisomies were identified for each autosome, with the exceptions of 1, 3, and 19. Among the 171 autosomal trisomies, trisomy 16 was the most common (19.9%), followed by trisomy 22 (13.5%), trisomy 21 (12.3 %), trisomy 15 (9.9%), and trisomies 18 and 13 (5.3%). The frequency of chromosomal abnormalities decreased with gestational age and increased with maternal age, but only because of increases in trisomies and complex abnormalities. Conclusions: We have presented a large collection of cytogenetic data for SABs collected during the past 6 years and provided a database for prenatal genetic counseling of parents who have experienced SABs in Korea.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.737-744
• /
• 2001

This study was carried to investigate the changes in physical and chemical properties during preparation of Yukwa. Protein content of glutinous rice was decreased during soaking time and acid and pH values were increased while contents of lipid and ash were not changed. Particle size distribution showed thate average particle size of 7 days soaking treatment smaller than those of 3 days and starch damage of glutinous rice flour was increased during soaking time. The major flavor components after soaking were found ethyl ester acetic acid, ethanol, 2-butan -ol, 2-methyl 1-propanol, 1-butanol, 3-methyl 1-butanol and 1-pentanol, propanoic acid. Content of acetic acid and butanoic acid were rapidly increased during soaking time. Results for ratio of storage modulus(G') and loss modulus(G') in glutinous rice flour dough indicated $tan{\delta}$ was increased for a while and decreased as frequency increased. G' value was very similar with G' value after steaming which means rubber-like property while G' and G' value were changed after during storage time. Treatment at $-20^{\circ}C$ had the highest hardness for cutting degree of dough. There was no difference in color value between different water contents. Hardness of Bandegi (sheet) was decreased as water content increased and the highest popping value was obtained at 18% of water contents. Adding 3% soaked bean had higher redness value of Yukwa and lower value in yellowness.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.25-33
• /
• 2007

In this paper, the high isolation and wideband 94 GHz MIMIC(Millimeter-wave Monolithic Integrated Circuit) single balanced cascode mixer was designed and fabricated. Also, we designed and fabricated a 3 dB tandem coupler which has a high isolation and wideband characteristic. The single balanced resistive mixer which does not require an external IF balun was designed using the 0.1 ${\mu}m$ InGaAs/InAlAs/GaAs metamorphic HEMT(High Electron Mobility Transistor). The DC characteristics of MHEMT's are 665 mA/mm of drain current density, 691 mS/mm of maximum transconductance. The current gain cut-off frequency($f_T$) is 189 GHz and the maximum oscillation frequency($f_{max}$) is 334 GHz. A 94 GHz single balanced cascode mixer was fabricated using our 0.1 ${\mu}m$ MHEMT MIMIC process. From the measurements, the fabricated couplers showed wideband characteristics. The conversion loss of single balanced cascode mixer was 9.8 dB at an LO power of 10.9 dBm. The LO to RF isolation of single balanced cascode mixer was 29.5 dB at 94 GHz. We obtained in this study a higher LO-RF isolation compared to some other single balanced mixers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.62-75
• /
• 2007

This paper describes a shaped-beam antenna for increasing the antenna gain of a radiating element. The proposed antenna structure is composed of an exciting element and a multi-layered disk array structure(MDAS). The stack micro-strip patch elements were used as the exciter for effectively radiating the electromagnetic power to the MDAS over the broadband, and finite metallic disk array elements - which give the role of a director for shaping the antenna beam with the high gain - were finitely and periodically layered onto it. The efficient power coupling between the exciter and the MDAS should be carried out in such a way that the proposed antenna has a high gain characteristic. The design parameters of the exciter and the MDAS should be optimized together to meet the required specifications to meet the required specifications. In this study, a shaped-beam antenna with high gain was optimally designed under the operating conditions with a linear polarization and the frequency band of $9.6{\sim}10.4\;GHz$. Two methods constructed using thin dielectric film and dielectric foam materials respectively were also proposed in order to implement the MBAS of the antenna. In particular, through the computer simulation process, the electrical performance variations of the antenna with the MDAS realized by the thin dielectric film materials were shown according to the number of disk array elements in the stack layer. Two kinds of antenna breadboard with the MDAS realized with the thin dielectric film and dielectric foam materials were fabricated, but experimentation was conducted only on the antenna breadboard(Type 1) with the MDAS realized with the thin dielectric film materials according to the number of disk array elements in the stack layer in order to compare it with the electrical performance variations obtained during the simulation. The measured antenna gain performance was found to be in good agreement with the simulated one, and showed the periodicity of the antenna gain variations according to the stack layer number of the disk array elements. The electrical performance of the Type 1 antenna was measured at the center frequency of 10 GHz. As the disk away elements became the ten stacks, a maximum antenna gain of 15.65 dBi was obtained, and the measured return loss was not less than 11.4 dB within the operating band. Therefore, a 5 dB gain improvement of the Type 1 antenna can be obtained by the MDAS that is excited by the stack microstrip patch elements. As the disk array elements became the twelve stacks, the antenna gain of the Type 1 was measured to be 1.35 dB more than the antenna gain of the Type 2 by the outer dielectric ring effect, and the 3 dB beam widths measured from the two antenna breadboards were about $28^{\circ}$ and $36^{\circ}$ respectively.