• The Journal of the Acoustical Society of Korea
• /
• 제20권4E호
• /
• pp.52-60
• /
• 2001

This paper describes real time implementation of subband sound localization system on a floating-point DSP TI TMS320C31. The system determines two dimensional location of an active speaker in a closed room environment with real noise presents. The system consists of an two microphone array connected to TI DSP hosted by PC. The implemented sound localization algorithm is Subband CPSP which is an improved version of traditional CPSP (Cross-Power Spectrum Phase) method. The algorithm first split the input speech signal into arbitrary number of subband using subband filter banks and calculate the CPSP in each subband. It then averages out the CPSP results on each subband and compute a source location estimate. The proposed algorithm has an advantage over CPSP such that it minimize the overall estimation error in source location by limiting the specific band dominant noise to that subband. As a result, it makes possible to set up a robust real time sound localization system. For real time simulation, the input speech is captured using two microphone and digitized by the DSP at sampling rate 8192 hz, 16 bit/sample. The source location is then estimated at once per second to satisfy real-time computational constraints. The performance of the proposed system is confirmed by several real time simulation of the speech at a distance of 1m, 2m, 3m with various speech source locations and it shows over 5% accuracy improvement for the source location estimation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제17권6호
• /
• pp.1477-1486
• /
• 2013

In this paper, Implementation of location estimation system using wireless communication technology based on Zigbee. Using wireless communication technology, calculation more accurate location information and service location information to the H/W and S/W has been developed. Receivers, repeaters, smart tag(location device), was developed for implement a location estimation system. The smart tag is built the 120~130KHz, 13~14MHz, 2.0~3.0GHz radio frequency tag. Receiver and repeater is applied to the tag module to recognize the location device's active RFID tags transmit a wireless signal for tag identification. Common Entrance control system in contact with a smart tag, It was implemented to transfer the value of the tag to the access control server over a LAN.

• Journal of IKEEE
• /
• 제3권1호
• /
• pp.101-108
• /
• 1999

In this paper, a real time diagnostic algorithm for estimating the impact location by loose parts is proposed. It is composed of two modules such as the alarm discrimination module (ADM) and the impact-location estimation module(IEM). First, ADM decides whether the detected signal that triggers the alarm is the impact signal by loose parts or the noise signal. Second, IEM by use of the arrival time method estimates the impact location of loose parts. In order to validate the application of this method, the test experiment with a mock-up (flat board and reactor) system is performed. The experimental results show the efficiency of this algorithm even under high level noise and potential application to Loose Part Monitoring System (LPMS) for improving diagnosis capability in nuclear power plants.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1709-1712
• /
• 2002

In the microcell- or picocell-based system the frequent movements of the mobile bring about excessive traffics into the networks. A mobile location estimation mechanism can facilitate both efficient resource allocation and better QoS provisioning through handoff optimization. Existing location estimation schemes consider only LOS model and have poor performance in presence of multi- path and shadowing. In this paper we study a novel scheme which can increase estimation accuracy by considering NLOS environment

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.957-960
• /
• 2006

In this paper, we studied the location estimation algorithm of a spatial 3 dimension which extend the location estimation algorithm of a plane 2 dimension in 2.45GHz band RTLS(Real time location system). We used TDOA scheme which need not a time of transmission information of the tag and estimated 3 dimension coordinates. Also, estimated intersection of hyperbolic curve to X, Y coordinate of the tag at 2D coordinates searching area, $300m\times300m$ and LOS propagation environments. And, we estimated Z coordinate ultimately using X, Y coordinate. The location estimation algorithm of a spatial 3 dimension satisfies the RTLS specification requirement, 3m radius accuracy. From the result, we confirm that the location of tag which similar to actual coordinate in the case to an ideal received offset. However, we verified that the location of tag which escapes from a radius 3m within error range when received offset increased. Therefore, as the future work we are consider enhanced location accuracy of a spatial 3 dimension in RTLS system which using the decrease scheme of reader offset or the discriminate scheme of the estimation location.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• 제49권8호
• /
• pp.369-373
• /
• 2000

High impedance fault(HIF) is defined as a fault that the general overcurrent relay can not detect or interrupt. Especially when HIF occurs in residential areas, energized high voltage conductor results in fire hazard, equipment damage or personal threat. This paper proposes a fault location estimation algorithm for high impedance fault using wavelet transform. The algorithm is based on the wavelet analysis of the fault voltage and current signals. The performance of the proposed algorithm is tested on a typical 154kV korean transmission line system under various fault conditions. From the tests presented in this paper it can be concluded that a fault location estimation algorithm using wavelet transform can precisely calculate the fault point for HIF.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• 제11권1호
• /
• pp.1-9
• /
• 2012

In this paper, we proposed a method of improving the location estimation error existing in RTLS (Real Time Location Service) system for the individual mobility. As ubiquitous age comes, interest for indoor location tracking system is getting more increased. However, existing indoor location tracking system does not correspond actively to frequent changes in indoor environment, and there is a problem that correct location measurement of moving object is difficult due to NLOS (non-line-of-sight) property of indoor environment. Purpose of this paper is to propose an environment accommodation location tracking system that improves the location precision of moving object and grasps location of the object effectively, which is essential an element effectively to provide service and satisfy various users' request.

• Journal of Korea Society of Digital Industry and Information Management
• /
• 제8권2호
• /
• pp.95-104
• /
• 2012

In this paper, an estimation of person height and 3D location of a moving person by using the pan/tilt-embedded stereo tracking system is suggested and implemented. In the proposed system, face coordinates of a target person is detected from the sequential input stereo image pairs by using the YCbCr color model and phase-type correlation methods and then, using this data as well as the geometric information of the stereo tracking system, distance to the target from the stereo camera and 3-dimensional location information of a target person are extracted. Basing on these extracted data the pan/tilt system embedded in the stereo camera is controlled to adaptively track a moving person and as a result, moving trajectory of a target person can be obtained. From some experiments using 780 frames of the sequential stereo image pairs, it is analyzed that standard deviation of the position displacement of the target in the horizontal and vertical directions after tracking is kept to be very low value of 1.5, 0.42 for 780 frames on average, and error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 0.5% on average. These good experimental results suggest a possibility of implementation of a new stereo target tracking system having a high degree of accuracy and a very fast response time with this proposed algorithm.

• The Journal of Korea Robotics Society
• /
• 제9권4호
• /
• pp.206-215
• /
• 2014

Acoustic signal is crucial for the autonomous navigation of underwater vehicles. For this purpose, this paper presents a method of acoustic source localization. The proposed method is based on the probabilistic estimation of time delay of acoustic signals received by two hydrophones. Using Bayesian update process, the proposed method can provide reliable estimation of direction angle of the acoustic source. The acquired direction information is used to estimate the location of the acoustic source. By accumulating direction information from various vehicle locations, the acoustic source localization is achieved using extended Kalman filter. The proposed method can provide a reliable estimation of the direction and location of the acoustic source, even under for a noisy acoustic signal. Experimental results demonstrate the performance of the proposed acoustic source localization method in a real sea environment.

• Journal of Communications and Networks
• /
• 제9권3호
• /
• pp.254-264
• /
• 2007

A promising approach to improve the performance of mobile location system is the use of antenna arrays in both transmitter and receiver sides. Using advanced array signal processing techniques, such multiple-input multiple-output (MIMO) communication systems can offer more mobile location information by exploiting the spatial properties of the multipath channel. In this paper, we propose a novel approach to determine the position of mobile terminal based on estimated multipath signal parameters using only one base station in MIMO communication systems. This approach intends to minimize the error occurring from the estimation of multiple paths and gives an optimal estimation of the position of mobile terminal by simultaneously calculating a set of nonlinear location equations. This solution breaks the bottleneck of conventional mobile location systems which have to require multilateration of at least three base stations.