• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.723-743
• /
• 2016

Indoor positioning is considered an enabler for a variety of applications, the demand for an indoor positioning service has also been accelerated. That is because that people spend most of their time indoor environment. Meanwhile, the smartphone integrated powerful camera is an efficient platform for navigation and positioning. However, for high accuracy indoor positioning by using a smartphone, there are two constraints that includes: (1) limited computational and memory resources of smartphone; (2) users' moving in large buildings. To address those issues, this paper uses the TC-OFDM for calculating the coarse positioning information includes horizontal and altitude information for assisting smartphone camera-based positioning. Moreover, a unified representation model of image features under variety of scenarios whose name is FAST-SURF is established for computing the fine location. Finally, an optimization marginalized particle filter is proposed for fusing the positioning information from TC-OFDM and images. The experimental result shows that the wide location detection accuracy is 0.823 m (1σ) at horizontal and 0.5 m at vertical. Comparing to the WiFi-based and ibeacon-based positioning methods, our method is powerful while being easy to be deployed and optimized.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3810-3836
• /
• 2014

Geo-location white space spectrum databases (GL-WSDBs) are currently the preferred technique for enabling spectrum sharing between primary users and secondary users or white space devices (WSDs) in the very-high frequency (VHF) and ultra-high frequency (UHF) bands. This is true because technologies for making low-cost WSDs capable of autonomous sensing and detection of available white space (WS) spectrum are not yet feasible. This paper reviews the necessary enabling technical conditions to allow coexistence of primary and secondary systems in the VHF and UHF spectrum through a GL-WSDB approach. The practical implementation of South Africa's first GL-WSDB was performed. Results of WS channels available from five cities in South Africa calculated from the implemented GL-WSDB was compared with a commercially available GL-WSDB and was found to be 68% similar. Additionally, results from the implemented GL-WSDB were compared with measurements obtained from field spectrum scanning campaigns at two different locations in Cape Town, South Africa, and was found to be 64% similar.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.85-93
• /
• 2001

In this paper, a path restoration method independent of failure location in all-optical networks is proposed and its wavelength requirements are calculated. In the proposed method, since a single backup wavelength is used for any link failure, a node can consist of only fixed wavelength transmitters, resulting in the levels node cost. Hence, restoration process can be triggered just after the failure detection, if combined with edge-disjoint path restoration method. This feature and the parallel cross-connection message transfer technique proposed in this paper make the restoration process faster. Also, it is shown the wavelength requirements in the proposed method are similar to the ones in the method using tunable backup wavelength, resulting in little increment for transmission cost.

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.546-551
• /
• 2010

The objective of this research is to estimate the crack location and size of a carbon steel pipe by using a laser ultrasound guided wave for the wall thinning evaluation of an elbow. The wall thinning of the carbon steel pipe is one of the most serious problems in nuclear power plants, especially the wall thinning of the carbon steel elbow caused by Flow-Accelerated Corrosion (FAC). Therefore, a non-destructive inspection method of elbow is essential for the nuclear power plants to operate safely. The specimens used in this study were carbon steel elbows, which represented the main elements of real nuclear power plants. The shape of the wall thinning was an oval with a width of 120mm, a length of 80mm, and a depth of 5mm. The L(0,1) and L(0,2) modes variation of the ultrasound guided wave signal is obtained from the response of the laser generation/air-coupled detection ultrasonic hybrid system represent the characteristics of the defect. The trends of these characteristics and signal processing were used to estimate the size and location of wall thinning.

• Korean Journal of Bronchoesophagology
• /
• v.17 no.1
• /
• pp.40-45
• /
• 2011

Background and Objectives Detailed information about the impacted esophageal foreign body is essential for safe extraction. Three dimensional reconstruction technique was applied to know shape, size and location of the simulative foreign bodies of stone, hyoid bone and endotracheal tube. Materials and Methods Submandibular gland stone, hyoid bone and endotracheal tube were used to simulate impacted foreign bodies. Axial CT, multi-planar reconstruction, volume of interest and virtual camera of Rapidia software were used to get information about the simulative foreign bodies from CT data. Shape and size were compared with the real materials. Exact locations were measured in appropriate modes of Rapidia. Results Shapes of the simulative foreign bodies matched well with the real materials. Size and location could be measured in various modes with some variable results. Conclusion 3D technique can be applied to get information about the simulative foreign bodies. This technique could be applied to the impacted esophageal foreign body.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.44.3-45
• /
• 2016

In this study, we identify 307 the geosynchronous magnetopause crossing (GMC) using geosynchronous satellite observation data from 1996 to 2010 as well as make an observational test of magnetopause location models using the identified events. For this, we consider three models: Petrinec and Russell (1996), Shue et al. (1998), and Lin et al. (2010). To evaluate the models, we estimate a Probability of Detection (PoD) and a Critical Success Index (CSI) as a function of year. To examine the effect of solar cycle phase, we consider three different time periods: (1) ascending phase (1996-1999), (2) maximum phase (2000-2002), and (3) descending phase (2003-2008). Major results from this study are as follows. First, the PoD values of all models range from 0.6 to 1.0 for the most of years. Second, the PoD values of Lin et al. (2010) are noticeably higher than those of the other models. Third, the CSI values of all models range from 0.3 to 0.6 and those of Shue et al. (1998) are slightly higher than those of the other models. Fourth, the predicted magnetopause radius based on Lin et al.(2010) well match the observed one within one earth radius, while that on Shue et al. (1998) overestimate the observed one by about 2 earth radii. Fifth, the PoD and CSI values of all the models are better for the solar maximum phase than those for the other phases, implying that the models are more optimized for the phase.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.151-155
• /
• 2008

KHST(Korean High Speed Train) has been utilized the total measurement system which evaluates the efficiency and a breakdown of the vehicle and it's results effect to secure reliability of the vehicle. Generally KHST has been received pulse signals from the wheel. It calculates the travel distance after counter the signals to confirm location information of the vehicle. However, there is a limit to measure the location of the vehicle due to slip, slide and the wheel attrition. We have developed a new measurement system by using GPS to complement those errors. In general, GPS receivers are composed of an antenna, tuned to the frequencies transmitted by the satellites, receiver-processors, and a highly-stable clock The GPS mounted on the roof of TT4 in KHST receives a signal from the RS232 communication port. It is connected to the network system in TT3 after converting with TCPIP communication. It is able to track the position of vehicle and synchronize the signal from different measurement system simultaneously. Therefore it is able to chase the fault occurrence, track inspection and electrical interruption at real-time situation more accurately. There is not an error coursed by vehicle conditions such as slip and the slide.

• 전자공학회논문지 IE
• /
• v.48 no.1
• /
• pp.45-50
• /
• 2011

In this paper, different RFID tag types compliant with UHF frequency based RFID system were chosen to build RFID tag embedded concrete blocks. Then, by placing the tags in systematically varied depths of a concrete block, we could measure the RF signal attenuation pattern as the performance indicator of a specific concrete embedded RFID system. Experiments show that the concrete mixing ratio makes no significant difference in tag detection performance level. The significance of the developed RFID system lies in its capability of eliminating GPS's error and shadow area as well as providing smart infrastructure for supporting truly pervasive ubiquitous computing applications especially in outdoor environment.

• Smart Structures and Systems
• /
• v.14 no.2
• /
• pp.105-128
• /
• 2014

The stochastic damage locating vector (SDLV) method has been studied extensively in recent years because of its potential to determine the location of damage in structures without the need for measuring the input excitation. The SDLV method has been shown to be a particularly useful tool for damage localization in steel truss bridges through numerical simulation and experimental validation. However, several issues still need clarification. For example, two methods have been suggested for determining the observation matrix C identified for the structural system; yet little guidance has been provided regarding the conditions under which the respective formulations should be used. Additionally, the specific layout of the sensors to achieve effective performance with the SDLV method and the associated relationship to the specific type of truss structure have yet to be explored. Moreover, how the location of truss members influences the damage localization results should be studied. In this paper, these three issues are first investigated through numerical simulation and subsequently the main results are validated experimentally. The results of this paper provide guidance on the effective use of the SDLV method.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2018

Wide-area monitoring of tree-related high impedance fault (THIF) efficiently contributes to increase reliability of large-scaled network, since the failure to early location of them may results in critical lines tripping and consequently large blackouts. In the first place, this wide-area monitoring of THIF requires managing the placement of sensors across large power grid network according to THIF detection objective. For this purpose, current paper presents a framework in which sensors are distributed according to a predetermined risk map. The proposed risk map determines the possibility of THIF occurrence on every branch in a power network, based on electrical conductivity of trees and their positions to power lines which extracted from spectral data. The obtained possibility value can be considered as a weight coefficient assigned to each branch in sensor placement problem. The next step after sensors deployment is to on-line monitor based on moving data window. In this on-line process, the received data window is evaluated for obtaining a correlation between low frequency and high frequency components of signal. If obtained correlation follows a specified pattern, received signal is considered as a THIF. Thereafter, if several faulted section candidates are found by deployed sensors, the most likely location is chosen from the list of candidates based on predetermined THIF risk map.