• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.27-35
• /
• 1998

In Korea, the initial installation of GIS requires lots of cost, time, and human efforts. If the accuracy of GIS data does not meet the certain standard for use, the system may not work as expected. So, it needs to be investigated for the accuracy of raw data. However, there is little study for the accuracy of raw data in Korea. Therefore, the purpose of this study is to review the data accuracy of raw data - geologic map, 1:5,000 and 1:25,000 scale topographic map, forest stand map, degree of green naturality(DGN) map, and detailed survey data of DGN map-, which are to be used in Environmental Information System(EIS) in Korea. After this study, some errors in data were surveyed and following conclusions were derived. (1) There is no map data, e. g, wildlife habitat map. (2) Some data are misinterpreted depending on the location in the geologic map. (3) Some data are not updated properly after change of topography in the topographic map or the elevation and location is different depending on the scale.. (4) Some data are not edited properly in the forest stand map, e. g. two attributes in one polygon. (5) DGN classification system does not reflect the characteristic of Korean vegetation community. So, it needs to be refined and restructured.

• Quality Improvement in Health Care
• /
• v.22 no.1
• /
• pp.71-90
• /
• 2016

Purpose: Objective of this study was to investigate how often nurses to perform patient safety activities. Methods: 521 observations were collected in 9 hospitals by 107 nursing students. Nurses' patient safety care activities were measured 0 (not at all) to 10 (all the time) scores. Descriptive statistics, independent t-test, one way ANOVA, correlation, multiple regression used to analyse data. Results: Items like 'Initial nursing assessment', 'drug management bring on', 'preparation for radiology test', 'falls assessment', 'nursing record' got high scores. But, scores of 'patient identification', 'verbal order management', 'hand hygiene' were lower than others. Each scores were different significantly according to institutions and departments. Within a same institution, the variance of scores, especially in 'patient identification', 'hand hygiene' were great. Scores of activities were different according to characteristics of institutions like type, location, number of beds, teaching hospital, number of accreditation, JCI accreditation. Predictors influencing nurses' patient safety activities were type, location and accreditation. These predictors account for 19.4% of variance. Conclusion: Performance of nurses' patient safety activities were different significantly according to characteristics of institutions. The important items like 'patient identification', 'hand hygiene' had achieved lowest performance. Further researches are needed to improve the basic safety activities.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.1
• /
• pp.28-37
• /
• 2022

Along with the remarkable advances in GNSS technology, SBAS further enhances the accuracy and integrity of GNSS location information and derives improvement in the safety and efficiency of air traffic management from reducing GNSS location errors, induced by passing through the ionosphere and atmosphere, to less than three meters. In this regard, ICAO specifies the standards of SBAS signals and recommends every party to phase in by 2025; and it is foreseeable that SBAS APV-I and CAT-I will be provided in South Korea by its undertaking the development of KASS, a Korean SBAS. The purpose of the study is to design SBAS APV-I procedure on the basis of the runway 15L of Incheon International Airport and conduct obstacle assessment according to PAN-OPS Doc. 8168, focusing on the usability and usefulness of SBAS APV-I. The results show that SBAS APV-I will provide better decision height compared to other PBN RNP approach procedures such as LNAV and Baro-VNAV at the Incheon International Airport.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.39-46
• /
• 2021

To analyze and defend malware codes, reverse engineering is used as identify function location information. However, the stripped binary is not easy to find information such as function location because function symbol information is removed. To solve this problem, there are various binary analysis tools such as BAP and BitBlaze IDA Pro, but they are based on heuristics method, so they do not perform well in general. In this paper, we propose a technique to extract function information using LSTM-based models by applying algorithms of N-byte method that is extracted binaries corresponding to reverse assembling instruments in a recursive descent method. Through experiments, the proposed techniques were superior to the existing techniques in terms of time and accuracy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.577-582
• /
• 2001

Identification of damage of structures has recently received considerable attention in the light of maintenance and safety assessment under service loads. In buildings, the current techniques of safety assessment largely depend on partial experiments such as visual inspection, destructive and nondestructive tests which lead to overconsumption of time and cost as well as higher labor intensity. Therefore, a new trial for safety assessment is urgently needed today. In this respect, the vibration characteristics of buildings have been applied steadily to obtain a damage index of the whole building, but it cannot be established as a practical method until now. This study is aimed at investigating the application of damage identification methods using vibration characteristics of building. Numerical tests are performed on a apartment building. From the test results, it is observed that severity and location of damage can be estimated with a relatively small error by using natural frequency and mode shape data.

• Journal of Korean Society of Rural Planning
• /
• v.4 no.1
• /
• pp.86-97
• /
• 1998

It is neceesary to evaluate the location suitability of protected cultivation facilities to guide reasonable protected cultivation. The evaluation system could help plan new protected cultivation facilities in rural areas. In this study, an assessment was made for the facilities located in three different selected regions: suburban, plain, and mountainous. The assessment was performed based on spatial characteristics of protected cultivation facilities such as land category, size of protected cultivation facilities, land shape, stoniness, land consolidation level, soil drainage, land slope, topography, effective soil depth, zoning or not of agricultural development area, irrigation and drainage condition, distance from roads, and so forth. The results showed that there were significant differences in locational characteristics among the three regions.

• Korea Journal of Hospital Management
• /
• v.18 no.2
• /
• pp.15-32
• /
• 2013

Few public health researchers have paid research attention to the location of medical institutions in Korea. Previous studies were published in geography journals, and relied on limited data in terms of geographic regions and the type of medical institutions. This study utilized nationwide data covering 8 types of medical institutions. We obtained data from Health Insurance Review and Assessment Service and National Population and Housing Census. The correlation coefficients of resident, daytime, university-graduate population, and the population of different age groups (fewer than 15, 15~64, 65 or more) were compared to understand their relative association with the location of medical institutions. Medical clinic, dental clinic, oriental medical clinic, and pharmacy, all of which are almost completely operated by private sector, showed strong positive correlation with population. Hospital-level medical institutions, which are operated by both public and private sector, had moderate positive correlation. Daytime population and university-graduate population, rather than resident population, were more correlated with the location of medical clinics. The correlation coefficients of the population of 15~64 age group and the location of medical institutions were greater than that of other age groups. The results showed that daytime and university-graduate population are more important than resident population to explain the location of medicalrelated facilities. The results also suggests that the population of age groups (especially, 15~64) might be one of important influence factors in the location of medical institutions.

• Journal of Fashion Business
• /
• v.9 no.5
• /
• pp.37-50
• /
• 2005

The purpose of this study is to present basic data that can express beautiful silhouette by studying visual effect that depend on waist position of basic pants and the change of round belt width and analyzing the study of visual effect of the pattern design as well as the effect of design component. The stimuli are 21 samples: 7 variations of the location of the waistline and 3 variations of the width of the belt. The data has been obtained from 35 fashion design majors. The data has analyzed by frequency, factor analysis, anova, scheffe's test and the MCA method. The visual effects by the location of waistline and the width of belt are composed of 3 factors : horizontal direction factor, vertical direction factor and flexuosity factor. In these factors, horizontal factor is estimated by most important factor. Visual effect is positive when belt width widens as the location of waist line goes down to position of low belt. And in case the location of waist line is in the position of natural waist belt and low rise belt, belt of 3.2cm width is effective visually. The interaction effects between the location of the waistline and the width of the belt have significant differences in all factors. Factor that appears in visual effect of basic pants can be evaluated differently according to pattern of pants and characteristic of body shape. So we may receive better visual assessment if we consider the location of waist belt and width of belt in side of visual effect and image, when we produce pants giving variety to crotch depth.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.5
• /
• pp.528-535
• /
• 1998

This study was conducted to provide some basic information for promoting efficiency in university food services. Subjects were 309 students of A, B and C university. The survey was done by questionaires, and the data were analyzed by SAS program. The quantity and nutritional values of food was evaluated as appropriate but temperature and freshness of food, use of seasonal food, variety of menu were indicated as unsatisfactory. Male students marked lower points on the price but female students gave lower scores for variety of menu and use of seasonl food. Employee hygiene fast service and neatness and kindness of workers were evaluated as appropriate but food sanitation and cleanness of dishes were indicated as unsatisfactory. A and B university students scored low marks on food sanitation. Female students scored higher marks on the employee's neatness. Arrangement of tables and chairs, location of returning utensils, location of counter use of menu board and ventilation facilities were scored as average but interior decoration and heating facilities were scored as low level. Students of a school scored low mark on the arrangement of tables, location of counter, heating facilities and interior decoration but students of B school scored low mark on the use of menu board. Calmness and comfortableness of dining hall was unsatisfactory but location of dining hall, serving time and waiting time were evaluated as appropriate. In conclusion improvements for temperature and freshness of food, use of seasonal food, variety of menu, food sanitation, cleanness of dishes, interior decoration, heating facility and resting area were indicated as necessary.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.122-124
• /
• 2010

WPS(Wifi Positioning System) is a location determination technique that utilizes AP information scattered all over the real world. In general, the finger print technique is used for location calculations in WPS. However the finger print technique is a location determination technique that utilizes average values and has problems in the accuracy of the location determination. It also shows low performance of the system due to arithmetic operations. In this paper, the MSS(Max Signal Strength) method is proposed to resolve the existing problems in the finger print technique. The proposed method can reduce the operation time and improve the accuracy of the system under the same conditions. Test environments of the system is presented and the performance of the system is analyzed to verify the methods.