• Journal of the Korean Institute of Gas
• /
• v.25 no.3
• /
• pp.53-58
• /
• 2021

The number of patients with cardiovascular diseases who experience an out-of-hospital cardiac arrest (OHCA) are increasing among young adults as well as the aged population. An automated external defibrillator (AED) is vital in improving survival rates of OHCA victims. Survival rates of OHCA were shown to decline exponentially in time to defibrillation, yet studies in Korea are uncommon that captures the properties of their survival rates in examining optimal locations of AEDs. In this study, we worked on the maximal gradual coverage location problem (MGCLP) with exponential decay coverage function to decide on their optimal locations. The exponential decay coverage function mitigates the drawback of over-estimating survival rates of OHCA patients. It is expected that a more sophisticated facility location problem will be developed to identify the "emergent" characteristics of pedestrians who responds to the OHCA occurrence by incorporating random pedestrian locations and movement through simulation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.927-933
• /
• 2006

The Variable Message Signs (VMS) are useful way to reduce the socio-economic costs due to the traffic congestions and delays by providing the information on traffic condition to drivers. This study provided a methodology to determine the locations of VMS's in terms of the minimization of the delay by applying the genetic algorithm. The optimal number of VMS's was also derived by the economic analysis based on the cost and the benefit. The simulation considered the variation of traffic volume, the frequency and duration of the incident, and the traffic conversion in order to reflect the real situation. I've made a scenario to consider traffic volume and incident, and it can undergo through changing different traffic volume and incident in time and days and seasons. And I've comprised two kinds of result, one is based on empirical studies, the other is based on Genetic Algorithm about optimal allocation VMS. This result of using optimal location VMS, reduce total travel time rather than preceding study based on normal location VMS and we can estimate optimal location VMS each one.

• Industrial Engineering and Management Systems
• /
• v.11 no.2
• /
• pp.202-214
• /
• 2012

This paper discusses the problem of determining locations for public health-care facilities and allocating patients to the public facilities with the objective of minimizing the total construction cost. The public health-care facilities have two types of facilities: public hospitals and health centers. The public hospital provides both hospital services and homecare services, while the health center provides only homecare service. We present an integer programming formulation for the problem, and develop two types of heuristics, based on priority rules and approximate mathematical formulation. Results of a series of computational experiments on a number of problem instances show that the algorithms give good solutions in a reasonable computation time.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.469-472
• /
• 2000

Security-related issues in mobile communications are increasing. The security requirements of mobile communications for the mobile users include authentication of the mobile user, the data confidentiality, the data confidentiality and the location privacy of mobile user. These services require security features compatible with the wireline networks. However, wireless networks have many restrictions compare to wireline networks such as the limited computational capability of mobile equipment and limited resource(bandwidth) between a mobile user and a fixed network. So, security features for IMT-2000 are designed to meet the limited capacity. In this paper, we analyze the required security features and mechanism, and design network access security feature effective for IMT-2000 Systems. The design includes security functions allocation to each system. Finally, discuss the computational power of each system based on at]coated functions to it

• Journal of Industrial Technology
• /
• v.22 no.A
• /
• pp.49-57
• /
• 2002

The accurate wind speed information at the hub height of a wind turbine is very essential to the exact estimation of the wind turbine power performance testing. Several methods on the site calibration, which is a technique to estimate the wind speed at the wind turbine's hub height based on the measured wind data using a reference meteorological mast, are introduced. A site calibration result and the wind resource assessment for the Taekwanryung test site are presented using a one-month wind data from a reference meteorological mast and a temporal mast installed at the site of wind turbine. From this analysis, it turns out that the current location of the reference meteorological mast is wrongly determined, and the self-developed codes for the site calibration are working properly. Besides, an analysis on the uncertainty allocation for the wind speed correction using site calibration is performed.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.333_335
• /
• 2009

It is expected, in the near future, that the use of distributed generation systems should be increased considerably. In this case, distance relay algorithm should be developed in the manner that it can reduce the error due to the in-feed effect. This paper presents a method to consider the fault current rushed from the remote end of a line. In the steady-state, the relays in both ends exchange the voltages of upper nodes. If a fault is perceived, the relay calculates fault location taking the fault current from the remote end by using voltage data of the remote ends obtained just before the fault. Even though this method has inevitable error, it can show more precise fault allocation. The suggested method is applied to a typical transmission system with two power sources in both ends to verify its effectiveness.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.3
• /
• pp.224-240
• /
• 2004

Supply chain management(SCM) has been recognized as a major strategy in today's market place. A growing number of researchers have begun to realize the strategic importance of model construction, planning, controlling and operation for SCM. Also various researches of supply chain model building are going on. In this paper, we synthesis key elements of supply chain model such as performance factors, decision variables and constraints. We have reviewed past and present supply chain models and then analyzed those in view of environment factors, operations, solution approaches.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1-8
• /
• 2008

The paper describes the process and issues encountered during the design and construction of seven kilometres of canal to convey 2.5 cumecs of flow to two power stations. The location of the scheme above the primary reservoir of the Waipori Hydropower scheme in Otago, New Zealand, utilising an existing stream diversion into this reservoir, means that no new water abstraction or diversion consents were required. This mini hydro development associated with the existing Waipori scheme was partly justified by an allocation of carbon credits. The scheme controls are slightly more complicated than many canal and penstock schemes as the canal lengths are considerable in relation to the gradient.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.4
• /
• pp.50-56
• /
• 2003

Most engineering products contain more than one component. Failure occurs either at the connection itself or in the component at the point of attachment of the connection in many engineering structures. The allocation and design of connections such as bolts, spot-welds, adhesive etc. usually play an important role in the structure of multi-components. Topology optimization of connection component provides more practical solution in design of multi-component connection system. In this study, a topology optimization based on density distribution approach has been applied to optimal location of fasteners such as T-shape, L-shape and multi-component connection system. From the results, it was verified that the number of iteration was reduced, and the optimal topology was obtained very similarly comparing with ESO method. Therefore, it can be concluded that the density distribution method is very suitable for topology optimization of multi-component structures.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.15-20
• /
• 2003

Most engineering products contain more than one component. Failure occurs either at the connection itself or in the component at the point of attachment of the connection in many engineering structures. The allocation and design of connections such as bolts, spot-welds, adhesive etc. usually play an important role in the structure of multi-components. Topology optimization of connection component provides more practical solution in design of multi-component connection system. In this study, a topology optimization based on density distribution approach has been applied to optimal location of fasteners such as T-shape, L-shape and multi-component connection system. From the results, it was verified that the number of iteration was reduced, and the optimal topology was obtained very similarly comparing with ESO method. Therefore, it can be concluded that the density distribution method is very suitable for topology optimization of multi-component structures.