• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.361-366
• /
• 2004

This study has carried out in order to furnish the fundamental material to systemize the lecture room into multimedia in the future, by locating college lecture room as the subject of study, by compare and analyze on acoustic character in both before and after of each improvement. Thereby, now we are about to compare and analyze on physical character of room acoustics in both common lecture room before improvement and the modified multimedia-lecture room after its improvement. Observing the conclusion obtained through experiment, reverberation time in the modified 'lecture room after improvement' became shorter compare with the 'lecture room before improvement', definition and RASTI also improved to be suitable to lecture, and considered that it is able to elevate the intimacy with studying and teaching efficiency, as well.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1543-1544
• /
• 2008

In this paper, we introduce a gaussian enveloped linear chirp signal that can change parameters for consideration of target material characteristics. Using the gaussian enveloped linear chirp signal, time-frequency domain reflectomety is able to detect fault location in power transmission line. we suggest design method of reference signal for power transmission line fault detection. This method is verified by locating fault in HIV low voltage power transmission line.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2112-2113
• /
• 2008

The concept is based on distributed wireless sensors that are attached to the incoming and outgoing power lines of secondary substations. A sensor measures only phase current characteristics of the wire it is attached to, is not synchronized to other sensors and does not need configuration of triggering levels. The main novelty of the concept is in detecting and locating faults by combining power distribution network characteristics on system level with low power sampling methods for individual sensors. This concept enables the sensor design to be simple, energy efficient and thus applicable in new installations and for retrofit purposes in both overhead and underground electrical distribution systems.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.382-389
• /
• 2011

Salesperson Monitoring System (SMS) is geographic based information system that supports business auditing, sales area coordinating and customer management for each salesperson. Conventional SMSs focus mainly on the monitoring or logging functions, i.e., a salesperson locating or moving trail tracking. However, the schedules have been planned by human planner, and they have rarely been managed with a software system like SMS. In this paper, a mixed integer programming model for a salesperson routing schedule is provided. Then, 2-phase Genetic Algorithm (GA) is proposed to make salesperson routing schedule. Experimental results show a validity of the proposed method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.117-123
• /
• 2002

Measurement of ground resistance is the basic and important procedure to evaluate the proriety of grounding systems performance. In the field, however, it is not an easy task to measure ground resistance accurately, because locating a right position of zero potential for accurate GPR(Ground Potential Rise) measurement is very difficult, especially in case of a grounding electrode with large dimension. In this paper, the estimation method of ground resistance by analysing earth surface potential distribution around the grounding electrodes has been described.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.4
• /
• pp.53-59
• /
• 1992

This paper describes an instrument for the detection and geometric location of partial discharge (PD) source in transformers. This instrument measures electric current pulses and ultrasonic pulses simultaneously, counts the number of electrical pulses and determines the geometric location of PD in transformers. It was found that there is a relationship between partial discharge magnitude and pulse repetition rate when the applied test voltage and oil temperature were varied. Through the laboratory test using model transformer, it was clarified that this detector could be used for detecting and locating PD in the transformer.

• Journal of applied mathematics & informatics
• /
• v.22 no.1_2
• /
• pp.339-350
• /
• 2006

The bifurcation point where a satellite component buds from another component is characterized by the existence of the common tangent line between the two osculating components appearing in the degree-n bifurcation set. We investigate the existence, location and number of bifurcation points for satellite components budding from the main component in the degree-n bifurcation set as well as a parametric boundary equation of the main component of the degree-n bifurcation set. Cusp points are also located on the boundary of the main component. Typical degree-n bifurcation sets and their components are illustrated with some computational results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.786-792
• /
• 2009

Topology optimization is to find the optimal material distribution of the specified design domain minimizing the objective function while satisfying the design constraints. Since the genetic algorithm (GA) has its advantage of locating global optimum with high probability, it has been applied to the topology optimization. To guarantee the structural connectivity, the concept of compliance pattern is proposed and to improve the convergence rate, small number of population size and variable probability in genetic operators are incorporated into GA. The rank sum weight method is applied to formulate the fitness function consisting of compliance, volume, connectivity and checkerboard pattern. To substantiate the proposed method design examples in the previous works are compared with respect to the number of function evaluation and objective function value. The comparative study shows that the compliance pattern based GA results in the reduction of computational cost to obtain the reasonable structural topology.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.9-14
• /
• 1998

One of the areas in the continuous casting process that up to this point, has not been definitively instrumented is a method of reliably locating the part of a continuously cast strand that remains liquid for a period after the outer portion has solidified. To solve the problem. Electromagnetic Trandsducers(EMAT) which operate across an air gap without the need for a coupling medium has been developed. The system was designed to employ a through transmission technique which enhanced the signal-to-noise ratio. The Al 75$\times$75mm and 75$\times$100mm simulators with 2, 4, 8, 16, 32 mm hole respectively has been produced in order to verify the developed EMAT system and to measure to liquid core in continuous casting strand. The system developed can be employed for the optimization of torch cutting speed and for the final cut length of the bloom as well as calculation of average bloom temperature.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.446-450
• /
• 2010

다변측량법은 위치가 알려진 3개 이상의 지점으로부터 대상까지의 거리 정보를 바탕으로 대상의 위치를 계산하는 기법이다. Real Time Locating Systems (RTLS) 에서는 대상의 위치를 파악하기 위해 다변측량 기법을 주로 사용하는데, 이를 위해서는 리더와 대상과의 거리 정보가 3개 이상 필요하다. 그러나 항만 환경처럼 시설물 설치가 어렵고 장애물도 많은 넓은 지역에서는 음영지역이 다수 존재하여 이러한 조건을 항상 만족시키기 어렵다. 본 논문에서는 다변측량이 불가능한 적은 수의 거리 정보만으로 대상의 위치를 파악할 수 있도록 대상의 동선 정보를 이용하는 동선 정보 기반의 측위 기법을 제안한다. 성능 평가 결과 최소자승법만을 사용했을 때보다 평균 측위 오차가 약 3m, 표준 편차가 6m 줄었으며, 측위 성공률이 4.6 배 이상 높아졌다.