• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1864-1865
• /
• 2007

In this paper, we proposed pre-filter algorithms which using frequency domain analysis method, for the detections of defects in large-sized Thin Film Transistor-Liquid Crystal Display(TFT-LCD) panel surfaces. We performed frequency analysis with 1-D, 2-D FFT methods for extract periodic patterns of lattice structures in TFT-LCDs. To remove this patterns, band-stop filters were used for eliminating specific frequency components. In order to acquire only defected images, we used 2-D inverse FFT methods which can be reverts images that remains defects.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.320-323
• /
• 2000

In the resent years, the Thin Film Transistor Liquid Crystal Display(TFT-LCD) have trend toward larger panel sizes and higher spatial and/or gray-scale resolution. In this trend, Because of its low field effect mobility, a-Si TFT is change to poly-Si TFT. In this paper, both effective-medium model of poly-Si TFTs and empirical capacitance model are applied to Pixel Design Array Simulation Tool (PDAST) and the pixel characteristics of TFT-LCD array were simulated, which were compared with the results calculated by Aim-Spice.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.236-237
• /
• 2000

LCD(liquid crystal display)에서 칼라를 만드는 방법에는 가색 혼법(additive color method)$^{(1)}$ 과 감색 혼법(subtractive color method)$^{(2).(3)}$ 이 있다. 가색 혼법은 빛의 3원색인 red, green, blue의 칼라 필터를 인접하게 배치시키고 각각의 칼라 필터에 해당 칼라의 신호를 인가하여 밝기를 제어함으로서 색을 표현하는 방법으로 대비비(contrast ratio)가 높고 표현할 수 있는 색상의 범위(gamut)가 넓고 액정 셀의 두께가 얇다는 장점이 있지만, 반면에 빛의 투과율이 낮다는 단점이 있다. 거기에 비해 감색 혼법은 cyan, magenta, yellow의 3색의 표시소자로서 3-stack을 구성하여, 각층에 해당 칼라의 신호를 인가하여 밝기를 제어함으로서 색을 표현하는 방식으로 광 투과량은 가색 혼법의 경우보다 높으나, 완전한 dark상태의 구현이 어렵기 때문에 명암대비비가 낮다는 단점이 있다. (중략)

• Annual Conference of KIPS
• /
• 2009.04a
• /
• pp.177-178
• /
• 2009

LCD(Liquid Crystal Display)가 발전하면서 많은 브라운관 TV가 LCD TV로 바뀌고 있다. 하지만 LCD의 특성으로 인해 동영상 재생시 느린 반응속도를 보이며 문제점들이 발생한다. 이를 해결하기 위한 방법으로 화면 재생율을 향상시키는 120Hz를 도입하고 있다. 본 논문에서는 120Hz 화면 재생율에 맞춰 기존의 60Hz 영상을 120Hz 영상으로 바꿀수 있는 화면보간기법을 제안한다. 제안하는 알고리즘은 생성되는 프레임 전후의 프레임 블록을 이용해 블록매칭을 이용한 단방향 움직임 추정을 이용하여 지역 움직임 추정을 한다. 이후 지역 움직임 추정에서 찾지 못한 모션 벡터를 전후프레임 픽셀 평균과 영향이 큰 모션 벡터를 선택하여 적용시키는 적역 움직임 추정으로 프레임을 완성시키는 알고리즘이다. 제안하는 알고리즘을 이용하여 다양한 해상도의 영상비교를 시행하여 좋은 결과를 얻었다.

• Design & Manufacturing
• /
• v.2 no.2
• /
• pp.29-32
• /
• 2008

A back light unit (BLU) is a key module of a thin film transistor liquid crystal display (TFT-LCD), frequently utilized in various mobile displays. In this study, we experimentally characterize transcription and optical properties of concave and convex microlens arrays (MLAs) of light guide plate (LGP) fabricated by injection molding with polycarbonate as a LGP substrate material. Nickel mold inserts were manufactured by electroforming on the MLA which was fabricated by the thermal reflow of photoresist microstructures patterned by UV-photolithography. For the case of convex microlens, the height of replicated microlens was less than that of the mold insert while maintaining almost the same microlens diameter of the mold insert as the location of the microlens is far from the gate. In contrast, for the concave microlens, the diameter of replicated microlens was larger than that of mold insert, while showing almost the same microlens height as the mold insert. From the optical examination of replicated convex and concave MLAs, it was found that a higher luminance of the LGP was achieved by the concave MLAs compared to the convex MLAs (about 30% enhancement in this case)due to the utilization of a larger amount of light provided by the light sources.

• Journal of Korea Multimedia Society
• /
• v.2 no.1
• /
• pp.89-98
• /
• 1999

In this paper, we propose the delta-shaped interpolation method for displaying multi-source video signals on a-Si TFT LCD Panel. The proposed method can be implemented by using less circuits than the conventional methods. Thus it can be applied to the FPD(Flat Panel Display) system without any cost increase such as field memory cost. In order to compare the picture quality of the proposed method with that of the conventional methods, the computer simulation has been executed by checking PSNR, which is especially focused on the edge characteristics. The simulation results show that the proposed method is better than others from the point of view on the edge and local characteristics of the image. Finally, the characteristics and trade-off of the proposed method are discussed.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1765-1767
• /
• 1999

We synthesised a photo-alignment material of PM4Ch (poly(4-methacryloylloxychalcone)). The electro-optical (EO) characteristics of photo-aligned twisted nematic (TN)-liquid crystal display (LCD) with linearly polarized ultraviolet (UV) light irradiation on PM4Ch surface were investigated. The uniform alignment of NLC with polarized UV light irradiation on PM4Ch surface was measured. Also, We had The excellent voltage-transmittance characteristics of photo-aligned TN-LCD. The low threshold voltage of photo-aligned TN-LCD was measured. Moreover, the fast response time of photo-aligned TN-LCD on PM4Ch was successfully achieved. Finally The reduction DC voltage of photo-aligned TN-LCD decreases with increasing the UV light irradiation time on photo-dimerized PM4Ch surface.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1665-1666
• /
• 2006

TFT-LCD(Thin Film Transistor Liquid Crystal Display)는 표시장치로서 실용화된 후 많은 상품에 적용중이다. 그러나, LCD는 자체 발광능력이 없으므로 그후면에서 LCD 화면을 밝혀주는 BLU(Backlight Unit)를 필요로 한다. BLU는 내부 광원으로 밝기가 균일한 평면광을 만들어 LCD 화면을 균일하게 면조사하는 역할을 한다. LCD가 적용되는 분야중 Note PC에는 광원으로 CCFL(Cold Cathode Fluorescent Lamp)가 적용되어 왔지만, 최근 고휘도, 박형화, 저소비 전력을 달성하기 위해 CCFL로는 한계가 있어 LED(Light Emitting Diode)를 적용한 BLU를 제작하기 위한 연구가 진행되고 있다. 본 연구에서는 점광원인 LED 적용한 LED에 있어서 요구되는 휘도 균일성을 향상시키기 위해서는 LED광원이 적용된 BLU의 외관 품질 향상을 위한 도광판 입광부 구조 최적화를 광추적 Simulation을 통해 예측하고 향상시킬 수 있는 구조를 제안한다. Simulation결과, 외관품질 개선을 위해 도광판 입광면에 130도의 Serration과 휘도를 향상하기 위해 도광판 밑면에 렌즈 형상의 바 구조를 도출해 적용한 결과 외관품질향상과 휘도향상을 얻었다.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.5
• /
• pp.198-201
• /
• 2008

The electro-optical (EO) characteristics of the one-side rubbing twisted nematic (TN) - liquid crystal display (LCD) on the polyimide (PI) surface with one-side ion beam (IB) irradiation were successfully studied. The good LC alignment for the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation was observed. The suitable transmittance-voltage curves for the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation were measured. Also, the good response time characteristics of the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation were measured. The fast response time can be achieved for the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.3
• /
• pp.39-46
• /
• 1994

CMOS LCD driving circuits using poly-Si TFT have been designed and basic blocks including test patterns have been fabricated. Column driver drives the pixels by block because polu-Si TFT can not operate at the speed of video signal. Row driver has mode selection circuit which can select a mode between interlacing mode and non-interlacing mode. Experimental results show shift register can operate at 1MHz colck frequency with 4pF load.