• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.612-614
• /
• 1992

This paper presents the analysis method of TLIM, for the purpose of developing linear induction motor drive for elevators. The transfer matrix to multilayer on cylindrical coordinate is derived. The equivalent circuit constructed from coupling complex phasor makes it possible to obtain characteristics of TLIM. The validity of the method lo verified by comparing the experimental and theoretical results for a pilot machine in locked status.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.804_805
• /
• 2009

This paper deals with analysis on electromagnetic characteristics of linear induction motor(LIM) using the analytical method. As a analytical method, space harmonics method which is applied to multilayer region is used in this paper. Using the flux density obtained by analytical method, thrust and normal force are calculated through Maxell stress tensor. The results such as flux densitty, eddy current and force are verified by comparison between analytical results and FEM.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.46-51
• /
• 2018

Constant slip frequency control has been conventionally used in thrust control of the linear induction motor(LIM) for magnetically levitated train. However in this paper variable slip frequency control method is presented to increase LIM efficiency according to change of driving notch. Thrust, attractive force, input power to inverter, regenerative power of the LIM are analyzed by finite element method when the train runs according to the presented control method. As a result it is proved experimentally that the electrical energy to inverter is reduced than the conventional method.

• 대한전기학회논문지
• /
• 제39권8호
• /
• pp.820-827
• /
• 1990

For the purpose of investigation the thrust force, the lateral force, and the eddy current loss when the primary and the secondary of a single-sided linear induction motor is displaced in the space, this paper proposes an analysis technique for the characteristics of the eddy current induced on the secondary and the magnetic flux density distribution in the y-z plane by F.E.M. To verify the effectiveness of this analysis technique, the starting-thrust force due to a lateral displacement is compared to the experimental data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.598-603
• /
• 2005

In this study, an adaptive control scheme with a pre-specified $H_{\infty}$ property is proposed for the tracking control of linear induction motor (LIM) drive system. Under the influence of uncertainties and external disturbances, by using nonlinear decoupling and parameter tuner, the robust performance control problem is formulated as a nonlinear $H_{\infty}$ problem and solved by a quadratic storage function. This new design method is able to track the step and several periodic commands with improved performance in face of parameter perturbations and external disturbances. Simulation and experimental results are provided to demonstrate the effectiveness of the proposed adaptive $H_{\infty}$ controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.24-27
• /
• 1989

In the case of analyzing electric machinery by finite element method, so far, magnetic current was selected as a driving source. But terminal voltage is a driving source in real systems, and magnetic current is varied according to variation of load conditions. Therfore, in this paper magnetic flux distribution of linear induction motor was analized by using kirchhoff's second law with voltage as a driving source, and magnetic current was calculated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.37-39
• /
• 1989

In this paper, the governing equation of each analyzed region of Single-sided Linear Induction Motor was induced from Maxwell's electromagnetic equation. And the linear induction motor was analyzed by finite element method. for calculating inductance, energy perturbation method was applied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.15-19
• /
• 1989

In this paper, the thrust force characteristic of SLIM according to the variation of several parameters was calculated from the fundamental equation based on Maxwell' s electromagnetic equation to design the transportation system which is drived by short primary single sided linear induction motor. The transportation system of moving secondary was constructed by the design values calculated on the base of simulated data and this values were compared to experimental values, and also the control method of transportation system was proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.70-72
• /
• 1993

In this paper, we propose the One-Ampere Conductor Method which is able to calculate the flux distribution conventionally and easily, and the improved winding method which suppress space harmonics of magnetomotive force and enhance the utilization of primary iron core in tubular linear induction motor. We examine no-load test to verify propriety of proposed method and analyze characteristics by finite element method. As a result, performances are improved and propriety of primary iron core is enhanced comparing with conventional model.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1460-1465
• /
• 2007

In this paper, the conventional linear induction motor(LIM) used in propelling the MAGLEV in Korea is redesigned in order to reduce its weight. The specifications of the newly designed model for base speed, acceleration, rated thrust and maximum output is respectively 45km/h, 4.0km/h/sec, 5,200[N] and 65 [kW]. Weight reduction effect of the LIM according to the change of pole number from 8 to 6 is shown. Equivalent circuit analysis considering end effect and finite element method are used for the analysis of the redesigned model. Finally the weight reduction ratio of the newly designed LIM to the conventional model, thrust, attraction force, line current, temperature rise, flux density distribution are presented.