• 제목/요약/키워드: line source

검색결과 1,654건 처리시간 0.024초

A Monte Carlo Study of the Diffusion Process of Thomson-Scattered Line Radiation in Phase Space

  • Hyeon Yong Choe;Hee-Won Lee
    • 천문학회지
    • /
    • 제56권1호
    • /
    • pp.23-33
    • /
    • 2023
  • We investigate the diffusion process of Thomson-scattered line photons in both real space and frequency space through a Monte Carlo approach. The emission source is assumed to be monochromatic and point-like embedded at the center of a free electron region in the form of a sphere and a slab. In the case of a spherical region, the line profiles emergent at a location of Thomson optical depth τTh from the source exhibit the full width of the half maximum σλ ≃ τ1.5Th. In the slab case, we focus on the polarization behavior where the polarization direction flips from the normal direction of the slab to the parallel as the slab optical depth τTh increases from τTh ≪ 1 to τTh ≫ 1. We propose that the polarization flip to the parallel direction to the slab surface in optically thick slabs is attributed to the robustness of the Stokes parameter Q along the vertical axis with respect to the observer's line of sight whereas randomization dominates the remaining region as τTh increases. A brief discussion on the importance of our study is presented.

PTZ 카메라 감시를 위한 실시간 위험 소리 검출 및 음원 방향 추정 소리 감시 시스템 (A Real-time Audio Surveillance System Detecting and Localizing Dangerous Sounds for PTZ Camera Surveillance)

  • 응웬비엣쿡;강호석;정선태;조성원
    • 한국멀티미디어학회논문지
    • /
    • 제16권11호
    • /
    • pp.1272-1280
    • /
    • 2013
  • 본 논문에서는 실시간으로 위험한 소리를 인식하고 그 방향을 파악하여 이를 통해 PTZ Camera가 위험한 소리 방향으로 회전하여 해당 지역 영상을 획득하여 전송할 수 있도록 지원하는 소리 감시 시스템을 제안한다. 제안 소리 감시 시스템은 적응 혼합 가우시안 모델(AGMM)을 사용하여 일상적인 배경 소리와는 비정상적인 소리를 전경 소리로 검출하고, AGMM 모델로 미리 학습된 전경 소리들 중의 하나로 분류한다. 분류된 소리가 위험한 소리에 속하는 경우, Dual delay-line 방법에 기반을 둔 음원 방향 추정 기법을 사용하여 그 방향을 파악한다. 최종적으로 방향 정보를 사용하여 PTZ 카메라를 조절하여 그 방향 지역의 해당 영상을 획득하고 전송될 수 있도록 지원한다. 제안하는 소리 감시 시스템은 전경 위험 소리들을 안정적으로 검출하고, 79%의 정확도로 위험소리들을 분류하고, 작은 오차범위 이내 음원 방향 추정 성능을 나타냄을 실험결과를 통해 확인하였다.

Belt Source and In-Line Manufacturing Equipment for Very Large-Size AMOLED

  • Hwang, Chang-Hun;Kim, Y.K.;Shin, Kee-Hyun;Ju, Sung-Hoo;Kwon, Jang-Hyuk
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.651-654
    • /
    • 2006
  • The inline manufacturing equipment using a combination of the belt source and LPS source which is innovatively designed is introduced for the largesize AMOLED. The features of the inline system include 60sec TACT time, 19 numbers of chambers, non-substrate bending and easy application to very thin TFT substrates for the $4^{th}$ - $8^{th}$ Generation AMOLEDs.

  • PDF

In-Line Manufacturing Tool Using Linear Belt Source Evaporation for Large Size Lighting OLED and Flexible OLED

  • Hwang, Chang-Hun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.91-94
    • /
    • 2007
  • We introduce the inline type mass production tool for the large size lighting OLEDs and flexible OLEDs. The manufacturing tool includes the linear belt source what is new concept for the organic deposition processes and the deposition operation combines directly to the encapsulation operation in a tool. The linear belt source evaporation in deposition processes is performed during the substrate transferring to innovatively improve the productivity in manufacturing.

  • PDF

선전류에 의해 발생되는 자장의 해석을 위한 유한요소법과 해석해의 결합 기법 (Analysis of Magnetic Fields Induced by Line Currents using Coupling of FEM and Analytical Solution)

  • 김영선;조대훈;이기식
    • 전기학회논문지P
    • /
    • 제55권3호
    • /
    • pp.141-145
    • /
    • 2006
  • The line current problem(2-dimensional space : point source) is not easy to analyze the magnetic field using the standard finite element method(FEM), such as overhead trolley line or transmission line. To supplement such a defect this paper is proposed the coupling scheme of analytical solution and FEM. In analysis of the magnetic field using the standard FEM. If the current region is a relatively small compared to the whole region. Therefore the current region must be finely divided using a large number of elements. And the large number of elements increase the number of unknown variables and the use of computer memories. In this paper, an analytical solution is suggested to supplement this weak points. When source is line current and the part of interest is far from line current, the analytical solution can be coupling with FEM at the boundary. Analytical solution can be described by the multiplication of two functions. One is power function of radius, the other is a trigonometric function of angle in the cylindrical coordinate system. There are integral constants of two types which can be established by fourier series expansion. Also fourier series is represented as the factor to apply the continuity of the magnetic vector potential and magnetic field intensity with tangential component at the boundary. To verify the proposed algorithm, we chose simplified model existing magnetic material in FE region. The results are compared with standard FE solution. And it is good agreed by increasing harmonic order.

능동방음벽 시스템에서의 제어음원 위치에 관한 고찰 (Optimal Transducer Positions of an Active Noise Control System with an Opening in an Enclosure)

  • 백광현
    • 한국소음진동공학회논문집
    • /
    • 제14권2호
    • /
    • pp.164-171
    • /
    • 2004
  • Active control techniques have been used in wide areas of noise and nitration control engineering and a noise barrier is one of them. Omoto's work in 1993 would be one of the fundamental and systematic studies on the actively controlled noise barrier, in which he used equal number of control sources and error sensors. The error sensors were placed uniformly along the top edge of the noise barrier with equal distance apart and the control sources were placed in the exactly same way some distance apart from the error sensors. Since then, a couple of studies were made on the secondary sources'arrangement rather than the optimality of secondary source positions. Shao's results showed that arc shaped arrangement for secondary sources is better than the straight line one, and later work of Yang showed that the more important factor is the average distance between the primary source and secondary sources. However, since these studies were all executed with a simple uniform distribution of the secondary sources along the straight line or arc, it is difficult to conclude which arrangement is superior In order for the fare comparison. the optimality of the source positions in each arrangement must be given in prior. The primary goal of this study is focused on this aspect and some major factors were investigated and compared. The computer simulation results showed that the arc shaped arrangement is marginally better than the straight line one, and more importantly slightly tuned position can greatly improve the performance of the control system.

Al-Si 도금된 보론강 레이저 소스에 따른 레이저 용접부의 미세조직과 기계적 성질에 미치는 핫스탬핑 처리의 영향 (Effect of Hot-stamping on Microstructures and Tensile Properties of Al-Si Coated Boron Steel Welds with Laser Source)

  • 오명환;공종판;권민석;강정윤
    • Journal of Welding and Joining
    • /
    • 제31권6호
    • /
    • pp.96-106
    • /
    • 2013
  • In this study, the effect of laser source($CO_2$ and Nd:YAG) on the microstructure and tensile properties of laser welded Al-Si coated boron steel(1.2mmt) was investigated with before and after hot-stamping. In case of as welds condition, fracture occurred in base metal unrelated to the laser source. It could be explained that tensile strength of fusion zone composed of martensite and bainite is higher than that of base metal that contains a lot of ferrite despite dilution of Al and Si from coating layer to fusion zone. In case of hot-stamping condition, the fracture occurred in fusion zone irrelevant to laser source and the tensile strength was lower than hot stamped base metal. In the $CO_2$ laser welds, $Fe_3$(Al,Si) formed near the bond line was transformed into ferrite during hot-stamping. Therefore tensile strength of bond line is lower than that of base metal and center of fusion zone and the fracture occurred in the bond line. On the other hand, in the Nd:YAG laser welds, the higher concentration of Al formed the ferrite in the fusion zone during hot-stamping treatment. Also, the thickness of centerline was thinner than that of base metal. Therefore, it is considered that fracture occurred in centerline of fusion zone due to effect of concentration stress, and it leaded to a lower tensile strength and elongation.

축소모델을 이용한 SSSC의 제어효과 및 계통응답 분석 (Analysis of Control Performance and Response of System using Scaled Model for SSSC)

  • 최종윤;홍순욱;장병훈;윤종수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
    • /
    • pp.202-204
    • /
    • 2000
  • This paper describes the theory and experimental result of scaled model of SSSC. The SSSC, a solid-state voltage source inverter coupled with a transformer, is connected in series with a transmission line. Injected voltage is almost in quadrature with the line current, thereby emulating an inductive or a capacitive reactance in series with the transmission line.

  • PDF

영상처리를 통한 접합면 검사 시스템 (Joint Aspect Inspecting System Using Image Processing)

  • 강원찬;김영동
    • 전기학회논문지P
    • /
    • 제53권1호
    • /
    • pp.1-6
    • /
    • 2004
  • In this paper, we present the new method for joint aspect inspecting system. We use the image processing and laser maker for light source. We can find the matrial joint status through processing the line pattern which is made by laser maker. To get the line pattern, in first, we did the preprocess of threshold. If the shape of line had over two segments, then the joint status is abnormal. We show our system efficency by experiment on tire facility.

Investigation on Contact Resistance of Amorphous Indium Gallium Zinc Oxide Thin Film Transistors with Various Electrodes by Transmission Line Method

  • Lee, Sang Yeol
    • Transactions on Electrical and Electronic Materials
    • /
    • 제16권3호
    • /
    • pp.139-141
    • /
    • 2015
  • Contact resistance of interface between the channel layers and various S/D electrodes was investigated by transmission line method. Different electrodes such as Ti/Au, a-IZO, and multilayer of a-IGZO/Ag/a-IGZO were compared in terms of contact resistance, using the transmission line model. The a-IGZO TFTs with a-IGZO/Ag/a-IGZO of S/D electrodes showed good performance and low contact resistance due to the homo-junction with channel layer.