• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.46-54
• /
• 2010

Since the accomplishment of industrialization and mechanization, human and the nature have gone farther their own way. Human depending on technology have been increasingly expanding and developing their artificial space and as times go by in such a way, estrangement between the human and nature has resulted in dissatisfaction of human's instinctual desire and devastation of human's living. People, to deal with such challenge, begins taking a look at the nature. In introducing the nature into the modern architecture, a physical natural element is often directly taken into or the shape that could be inferred from the nature is taken. The study was intended to identify the characteristics of the pattern introducing the nature into the modern architecture, as mentioned in the former case, which is summarized as follows, Introduction of the nature contains a variety of functions in the space and it creates the new space by integrating the internal and external space which becomes boundaryless integrated space. The boundary in the building tends to be getting more ambiguous, while the space accommodating the nature serves the interface, playing a role of intermediator for both the internal and external space. It functions the open public place that helps build the natural community among the users but taking the nature into the inner space, and it is used to attempt to change the interior of the building or for ventilation lighting or energy-saving purpose. The spatial meaning was found to have varied depending on pattern of the nature introduced. Such conclusions mentioned hereon is expected to help forecast and understand the forthcoming space accommodating the nature when reviewing the pattern of introducing the nature appeared In modern architecture.

• Korean Journal of Poultry Science
• /
• v.43 no.2
• /
• pp.97-103
• /
• 2016

This study aimed of effects of replacing maize with rice or brown rice on laying performance, egg quality, and apparent fecal digestibility of nutrient in Hy-Line Brown laying hens. A total of 200, 25-week old Hy-Line Brown laying hens were randomly assigned to one of 5 treatments, each of which was replicated 4 times. Four experimental diets that were formulated two different grains (brown rice or rice) with two inclusion levels of (15 and 30%) as a replacement of maize. The experimental period was 8 weeks. During the experiment, hens were provided with feed and water ad libitum and were exposed to a 16:8=L:D lighting schedule. There were no differences in feed intake, egg weight, and egg mass during the 8 weeks of the feeding trial among groups. However, hen-day egg production was greater (P<0.05) for Brown rice treatment groups than that for basal and rice treatment groups. In addition, the supplementation of brown rice or rice did not have an effect on eggshell strength, eggshell thickness, and HU during of the feeding trial (Table 4). However, egg yolk color was less (P<0.05) for basal treatment groups than that for among treatment group. ATTD of dry matter (DM) and crude fat were greater (P<0.05) for brown rice 15 treatment than for rice 30 treatment. Crude protein (CP) was greater (P<0.05) for brown rice 15 treatment than for basal treatment. In conclusion, brown rice or rice grains is a good alternative energy feedstuff and can be used in laying hens, totally replacing maize, without any negative effect on the laying performance, egg quality, and nutrient digestibility.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.174-174
• /
• 2010

Gallium Nitride(GaN) attracts great attention due to their wide band gap energy (3.4eV), high thermal stability to the solid state lighting devices like LED, Laser diode, UV photo detector, spintronic devices, solar cells, sensors etc. Recently, researchers are interested in synthesis of polycrystalline and amorphous GaN which has also attracted towards optoelectronic device applications significantly. One of the alternatives to deposit GaN at low temperature is to use Single Source Molecular Percursor (SSP) which provides preformed Ga-N bonding. Moreover, our group succeeds in hybridization of SSP synthesized GaN with Single wall carbon nanotube which could be applicable in field emitting devices, hybrid LEDs and sensors. In this work, the GaN thin films were deposited on c-axis oriented sapphire substrate by MBE (Molecular Beam Epitaxy) using novel single source precursor of dimethyl gallium azido-tert-butylamine($Me_2Ga(N_3)NH_2C(CH_3)_3$) with additional source of ammonia. The surface morphology, structural and optical properties of GaN thin films were analyzed for the deposition in the temperature range of $600^{\circ}C$ to $750^{\circ}C$. Electrical properties of deposited thin films were carried out by four point probe technique and home made Hall effect measurement. The effect of ammonia on the crystallinity, microstructure and optical properties of as-deposited thin films are discussed briefly. The crystalline quality of GaN thin film was improved with substrate temperature as indicated by XRD rocking curve measurement. Photoluminescence measurement shows broad emission around 350nm-650nm which could be related to impurities or defects.

• Convergence Security Journal
• /
• v.22 no.2
• /
• pp.59-66
• /
• 2022

Recently, smart home technology has been developed with a great response due to the convenience of home automation. Smart home technology provides various services by connecting various Internet of Things (IoT) and sensors to a home network through wired/wireless networks. In addition, the smart home service easily and conveniently controls lighting, energy, environment, and door cameras through a wall pad. However, while it has become a social issue due to the recent hacking accident of wall pads, personal information leakage and privacy infringement are expected. Accordingly, it is necessary to prepare preventive and countermeasures against security vulnerability factors of wall pads. Therefore, this study expects that it can be used as basic data for future smart home application and response technology development by examining the weak causes and countermeasures related to wall pads.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.417-425
• /
• 2023

Because an irradiation of 405 nm violet light could have a strong energy, it was used to be sterilized against various microbes in the indoor air condition or fresh food. Escherichia coli is a representative bio-pollutant in the indoor air-borne bacteria, and a hygienic microbe in the horticultural food. This study evaluated the inactivation influences on E. coli DS5α after exposure to 405 nm violet-light (VL) by investigating irradiating time, and the vertical and horizonal distance from light source. The illumination of 405 nm VL was inversely proportional to the distance from the VL source. E. coli DS5α on nutrient agar (NA) was inactivated approximately 50% more than the control when irradiated at 65 cm from 405 nm VL for 3 hours. When compared to the control, E. coli DS5α was inactivated approximately 50% within 70 cm from 405 nm VL for 3 hours. As it was irradiated for 3 hours 70 cm away from 405 nm VL, the horizonal distance from the point was negatively correlated to the inactivation of E. coli DS5α. These results indicated that the inactivation of E. coli DS5α grown on NA medium needs to be irradiated with 405 nm within 70 cm from the light source for 3 hours.

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.136-141
• /
• 2010

The purpose of this study is to examine the structure and heat generation mechanism of low voltage switches used to turn on or off the power supply to an indoor lighting system and investigate how the fixtures and movable contacts of the switches are damaged depending on the types of energy sources in order to secure the judgment base for expected PL disputes. Based on the Korean Standard (KS) testing method for incombustibility, this study applied a general flame to the switch. In addition, current was supplied to the switch using the PCITS (Primary Current Injection Test System). The ambient temperature and humidity were maintained at $22{\pm}2^{\circ}C$ and 40~60% respectively while performing the test. It is thought that the switch generated heat due to a defective connection of the wire and clip, insulation deterioration and defective contact of the movable contact, etc. The surface of the switch damaged by the general flame was uniformly carbonized. When the flame source was removed, the fire on the switch was extinguished naturally. From the result obtained by disassembling the switch carbonized by the general flame, it could be seen that fixtures and movable contacts remained in comparatively good shape but the enclosure, clip support, movable contact, indicating lamp, etc. showed carbonization and discoloration. In the case of the switch damaged by overcurrent, the clip connecting the wires, clip support, etc. showed almost no trace of damage, but the fixtures, movable contact, indicating lamp, etc. were severely carbonized. That is, the sections with high contact resistance were intensively damaged and showed a damage pattern indicating that carbonization progressed from the inside to the outside. Therefore, it is possible to judge the initial energy source by analyzing the characteristics of the carbonization pattern and the metal fixtures of damaged switches.

• Composites Research
• /
• v.31 no.4
• /
• pp.133-138
• /
• 2018

Polymer foams were used to fill the void in the structure in addition to flame retardant and heat insulation. Polymer foams such as polyurethane, polyisocyanurate, poly(vinyl chloride), polyethylene terephthalate were used to weight lighting materials. In this study, epoxy foam was used to improve mechanical properties of polymer foam. Acid anhydride type hardener reacts with polyol. Using this phenomenon, if blowing agent was added into epoxy resin using acid anhydride type hardener, formation and compressive properties of epoxy foam was studied. Formation of polymer foam was compared with type of blowing agent and concentration of blowing agent via compressive test. As these results, optimized condition of epoxy foam was found and epoxy foam had better compressive property than other polymer foam.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.35-43
• /
• 2014

In this paper, it is about to non-contact wireless power transmission according to various conditions of self induction principle between the two planar coils at a transmission unit and a receiving unit based on the theory of wireless power transmission. The experiments are occurred in order to power transfer of noncontact method from designed wireless circuits in the primely coil and secondary coil, and the applying to Half Bridge Resonant converter transmission unit and receiving unit. and that were able to prepared circumstance to calculate of the output voltage and power source. The main power of the inductive coupling the resonant converter at the transmission unit is converted electrical energy using the solar cell module and artificial light source (halogen lamp) as a replace light and received 24 V power supply from solar power was used a input power source for the wireless power transmission device. Experimental results, to received of power is used to illuminate the lighting and to charge the battery in receiving circuit.And the wireless power transmission efficiency measured at the output side of the transmission unit is obtained about 70% to 89% compared to input power of receiving unit.In addition, efficiency were tested through ID verification method and comparing the phase difference between the voltage when foreign substances interfere with wireless power transmission.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.845-848
• /
• 2013

Due to intense climate changes and extreme weather conditions a noticeable decrease has been observed in the growth of certain plants. The indoor plant factories would have certain benefits including increase in crop yield, reduction in distribution cost, and maintains the healthy freshness level of the agricultural product. Recently, an artificial light source with optimum wavelength is spot lighted to fulfill the need of light for the indoor plant factories. The energy efficient light emitting diodes (LED) provide the essential light energy for the proper growth of indoor cultivated plants. This work focuses to utilize ubiquitous sensors network(USN) in providing suitable environment for the proper growth of agricultural product inside the indoor plant factory. The proposed system makes use of sensors and actuators, communicating each other through WPAN, ZigBee network. The proposed system obscured the traditional indoor plant factories with easy installation and wireless connectivity of the sensors and actuators along with eliminating the web of wires reducing the initial installation and maintenance cost.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.2
• /
• pp.79-87
• /
• 2011

A fishing lamp is fishing gear to gather fish in the night. But the cost of oil which is used to a light fishing lamp, goes significantly up to almost one hundred million won for 50 tonnage vessels and forty million won in case of vessels less than 10 tonnages. This cost has almost taken 30.40% of total fishing costs. As oil price increases, the business condition of the fishery gets worse and worse. Therefore, it is very urgent to develop an economical fishing lamp, to solve the problem of fishery's business difficulty. This research aims at developing a fishing lamp for squid jigging fishery and hairtail angling fishery using the LED, which has excellent efficiency and durability. One fishing lamp has about 160Watt capacity and five fishing lamps are installed one aluminium panel in which sea water flows to emit generated heat from LED to outside. Developed fishing lamp lights to an effective direction of jigging and angling operation. This fishing lamp can be controlled to light the direction of fish shoal because the aluminium panel can be controlled to up and down direction. The wave length of fishing lamp has white and blue color. White color light is to gather fish shoal of horizontal direction and blue color light is to gather fish shoal of vertical direction. After development of this fishing lamp, 60.110 units are established on the boat, and operated fishing. Consequently, in the case of squid jigging, spent energy was reduced to 39%, in the case of hairtail angling, 68% of spent energy was reduced. And the catch was more than another boat.