• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.109-113
• /
• 2004

본 논문에서는 초고압 전력설비에서의 대전류 측정을 위한 광CT(optical current transformer)개발을 목적으로한 기초 연구를 하였다. 자기장에 의해서 광신호의 편광특성이 변화되는 Faraday 효과를 기본 이론으로 하며, 1310[nm] Laser Diode를 광원으로 사용하고 5[m], 10pm], 20[m]의 길이가 서로 다른 광섬유로 센싱부를 구성하였다. 전류의 측정은 400[A]에서 1300[A]까지의 범위에서 측정하였으며 센싱부를 구성한 광섬유의 길이에 따른 출력 특성을 파악하기 위한 실험을 하였다. 동일한 실험환경에서 각각의 출력의 크기 및 선형성은 인가 전류 및 광섬유의 길이에 비례하여 증가하였으며, 5[m]광섬유를 센싱부로 사용한 것은 최대 -11.1%의 오차율을, 10[m], 20[m]의 경우 각각 최대 -3.5%, 1.7%의 오차율을 나타냈다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.80-80
• /
• 2017

Titanium and its alloys that have a good biocompatibility, corrosion resistance, and mechanical properties such as hardness and wear resistance are widely used in dental and orthopedic implant applications. However, they do not form a chemical bond with bone tissue. Plasma electrolytic oxidation (PEO) that combines the high voltage spark and electro-chemical oxidation is a novel method to form ceramic coatings on light metals such as tita-nium and its alloys. This is an excellent re-producibility and economical, because the size and shape control of the nano-structure is relatively easy. Silicon (Si), manganese (Mn), and magne-sium (Mg) have a useful to bone. Particularly, Si has been found to be essential for normal bone, cartilage growth, and development. Mn influences regulation of bone remodeling be-cause its low content in body is connected with the rise of the concentration of calcium, phosphates and phosphatase out of cells. Pre-studies have shown that Mg plays very im-portant roles in essential for normal growth and metabolism of skeletal tissue in verte-brates and can be detected as minor constitu-ents in teeth and bone. In this study, Electrochemical behavior of plasma electrolytic oxidized films formed in solution containing Mn, Mg and Si ions were researched using various experimental in-struments. A series of Si-Mn-Mg coatings are produced on Ti dental implant using PEO, with the substitution degree, respectively, at 5 and 10%. The potentiodynamic polarization and AC impedance tests for corrosion behav-iors were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to + 2000mV. Also, AC impedance was performed at frequencies anging from 10MHz to 100kHz for corrosion resistance.

• 한국광학회지
• /
• 제4권4호
• /
• pp.420-427
• /
• 1993

융착 접속 기술을 이용하여 다중모우드 광섬유와 단일 모우드 광섬유내에 유전체 박막 거울을 제작하였다. $45{\circ}$ 유전체 거울이 내장된 광섬유는 극소형이며, 광학적인 손실이 매우 작고(1.3 ${\mu}m$에서, 다중 모우드 광섬유의 경우 0.2dB, 단일 모우드 광섬유의 경우 0.5dB), 기계적 강도가 우수한 결합기로 사용될 수 있다. 반사율은 파장에 따라 변화하며, 편광에 매우 민감하였다. 백색광을 사용하여 유전체 거울로부터 반사되는 출력 파워를 원거리 스캔하며 측정하였을 때 출력 빔의 모양은 거의 원형 대칭으로써 최대 파워의 5%에서 측정된 종횡비는 1.09이었다. 다이오우드 레이저 광원을 사용하여 측정한 다중모우드 광섬유 결합기의 광분파율은 종래의 FBT(Fused Biconical Taper) 결합기보다 입력 광신호의 결합 조건에 따른 변화가 훨씬 적어서 사용하는 광통신 시스템의 모우드 잡음에 덜 민감하다. 광섬유 축에 수직하게 증착된 다층 유전체 거울들의 반사율 스펙트럼 특성을 측정하였으며, 행렬 해석법을 사용하여 실험 결과를 분석, 고찰하였다.

• 융합신호처리학회논문지
• /
• 제9권3호
• /
• pp.179-187
• /
• 2008

본 논문에서는 저가의 광통신용 단일모드 광섬유와 편광소멸기를 이용한 비편광 광섬유 자이로스코프(D-FOG)를 설계/제작하여, 성능을 평가하였다. D-FOG의 위상오차를 줄이기 위해 사용광원의 전류 및 온도 안정화 회로를 제작하여 그 성능을 분석하였다. 제작된 전류 및 온도 안정화 회로의 전류 안정도는 $200{\mu}A$ 미만, 온도 안정도는 $0.0098^{\circ}C$로 양호한 성능을 보였다. 또한, 본 논문에서 제작된 D-FOG의 회전 각속도 측정 범위는 ${\pm}50^{\circ}/s$, Scale factor error는 2.8881%로 양호한 선형성을 보였으며, zero bias drift는 $19.49^{\circ}/h$의 bias 안정도를 보였다. 이는 고가인 고복굴절 편광 유지 광섬유를 이용해 제작된 기존의 FOG에 비해 높은 가격효율성을 갖는 저가의 FOG 제자의 가능성을 보여준다.

• 천문학논총
• /
• 제30권2호
• /
• pp.397-399
• /
• 2015

Recently, cosmic voids have been recognized as a powerful cosmological probe. A number of studies have focused on the effects of the gravitational lensing by voids on the temperature (and in some cases polarization) anisotropy of the Cosmic Microwave Background (CMB) background at relatively large to medium scales, l ~ 1000. Many of these studies attempt to explain the unusually large cold spot in CMB temperature maps and dynamical evidence of dark energy via detections of late-time integrated Sachs Wolfe (ISW) effect. Here, the effects of lensing by voids on the CMB temperature anisotropy at small scales, up to l = 3000, will be investigated. This work is carried out in the light of the benefits of adding large catalogues of cosmic voids, to be identified by future large galaxy surveys such as EUCLID and LSST, to the analysis of CMB data such as those from Planck mission. Our numerical simulation utilizes two methods, namely, the small-de ectionangle approximation and full ray-tracing analysis. Using the fitted void density profiles and radius (RV ) distribution available in the literature from N-body simulations, we simulated the secondary temperature anisotropy (lensing) of CMB photons induced by voids along a line of sight from redshift 0 to 2. Each line of sight contains approximately 1000 voids of effective radius $RV_{,eff}=35h^{-1}Mpc$ with randomly distributed radial and projected positions. Both methods are used to generate temperature maps. The two methods will be compared for their accuracy and effciency in the implementation of theoretical modeling.

• 한국표면공학회지
• /
• 제41권3호
• /
• pp.121-128
• /
• 2008

High strength 7xxx aluminum alloys have been applied to automotive bump back beam of the some limited model for light weight vehicle. The aluminum bump back beam is manufactured through extrusion, bending and welding. The residual stress given on these processes combines with the corrosive atmosphere on the road spreaded with corrosive chemicals to melt snow to occur the stress corrosion cracking. The composition of commercial 7xxx aluminum has Zn/Mg ratio about 3 and Cu over 2 wt% for better strength and stress corrosion cracking resistivity. But this composition isn't adequate for appling to the automotive bump back beam with high resistance to extrusion and bad weldability. In this study the composition of 7xxx aluminum alloy was modified to high Zn/Mg ratio and low Cu content for better extrusion and weldability. To estimate the resistivity against stress corrosion cracking of this aluminum alloy by slow strain rate test, the corrosion atmosphere and strain rate separate the stress corrosion cracking from conventional corrosion must be investigated. Using 0.6 Mol NaCl solution on slow strain rate test the stress corrosion cracking induced fracture was not observed. By adding 0.3% $H_2O_2$ and 0.6M $Na_2SO_4$ to 1M NaCl solution, the corrosion potential and current density of polarization curve moved to active potential and larger current density, and on the slow strain rate test the fracture energy in solution was lower than that in pre-exposure. These mean the stress corrosion cracking induced fracture can be estimated in this 1M NaCl + 0.3% $H_2O_2$ + 0.6M $Na_2SO_4$ solution. When the strain rate was below $2{\times}10^{-6}$, the stress corrosion cracking induced fracture start to be observed.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.366-372
• /
• 2017

Plasma electrolytic oxidation(PEO) has attracted attention as a surface treatment which has high wear resistance and corrosion resistance. PEO is generally considered as cost-effective, environmentally friendly and superior in terms of coating performance. Most of studies about the PEO processes have been applied to light metals such as Al and Mg. Because the strength of Al and Mg is weaker than that of steel, there is a limit to the application. In this study, PEO process was used to form oxide coatings on Hot dipped aluminized(HDA) steel and the characteristics of the coating film according to the PEO current density were studied. The morphology was observed by SEM and component was analyzed by using EDS. The corrosion behaviors of PEO coating films were estimated by exposing salt spray test at 5 wt.% NaCl solution and measuring polarization curves in deaerated 3 wt.% NaCl solution. With the increase of PEO process current density, the pore size of the coating surface and the thickness of coating increased. It was confirmed that no Fe component was present on the coating surface. PEO coating films obviously showed good corrosion resistance compared with HDA. It is considered that the PEO coating acts as a barrier to protect the base material from external factors causing corrosion.

• 농업과학연구
• /
• 제47권4호
• /
• pp.1109-1122
• /
• 2020

The aim of this study was to develop a marbling classification and prediction model using small parts of sirloin images based on a deep learning algorithm, namely, a convolutional neural network (CNN). Samples were purchased from a commercial slaughterhouse in Korea, images for each grade were acquired, and the total images (n = 500) were assigned according to their grade number: 1++, 1+, 1, and both 2 & 3. The image acquisition system consists of a DSLR camera with a polarization filter to remove diffusive reflectance and two light sources (55 W). To correct the distorted original images, a radial correction algorithm was implemented. Color images of sirloins of Hanwoo (mixed with feeder cattle, steer, and calf) were divided and sub-images with image sizes of 161 × 161 were made to train the marbling prediction model. In this study, the convolutional neural network (CNN) has four convolution layers and yields prediction results in accordance with marbling grades (1++, 1+, 1, and 2&3). Every single layer uses a rectified linear unit (ReLU) function as an activation function and max-pooling is used for extracting the edge between fat and muscle and reducing the variance of the data. Prediction accuracy was measured using an accuracy and kappa coefficient from a confusion matrix. We summed the prediction of sub-images and determined the total average prediction accuracy. Training accuracy was 100% and the test accuracy was 86%, indicating comparably good performance using the CNN. This study provides classification potential for predicting the marbling grade using color images and a convolutional neural network algorithm.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.362-377
• /
• 2023

Optical information processing technology is characterized by high speed and parallelism, and the light features short wavelength and large information capacity; At the same time, it has various attributes including amplitude, phase, wavelength and polarization, and is a carrier of multi-dimensional information. Therefore, optical encryption is of great significance in the field of information security transmission, and is widely used in the field of image encryption. For multi-image encryption, this paper proposes a multi-image encryption algorithm based on a modified Gerchberg-Saxton algorithm (MGSA) in the Fresnel-transform domain and computational ghost imaging. First, MGSA is used to realize "one code, one key"; Second, phase function superposition and normalization are used to reduce the amount of ciphertext transmission; Finally, computational ghost imaging is used to improve the security of the whole encryption system. This method can encrypt multiple images simultaneously with high efficiency, simple calculation, safety and reliability, and less data transmission. The encryption effect of the method is evaluated by using correlation coefficient and structural similarity, and the effectiveness and security of the method are verified by simulation experiments.

• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.83-89
• /
• 2015

본 논문에서는 졸-침투와 직접-패턴 공정을 이용하여 향상된 압전 후막의 전기적 특성과 우수한 패터닝 특성을 동시에 만족할 수 있는 제작 방법을 제시한다. 저온(< $850^{\circ}C$) 공정 후 후막의 고밀도 및 직접-패턴의 목적을 달성하기 위해서, 감광성 티탄산 지르콘산 연 ($Pb(Zr,Ti)O_3$, PZT) 졸을 스크린인쇄된 PZT 후막 내부로 침투시켰다. 직접-패턴된 PZT막은 포토크롬마스크와 UV 조사에 의해서 일정한 간격으로 인쇄된 후막 위에 성공적으로 형성되었다. 스크린인쇄된 후막은 분말형태의 기공성 구조를 갖고 있어 조사된 UV빛이 산란되기 때문에, 감광성 졸-침투 공정을 할 때 PZT 후막의 특성을 증가시키기 위한 공정의 최적화가 필요하다. 침투된 감광성 PZT 졸의 농도, 조사된 UV 시간 및 용매 현상 시간을 최적화한 결과, 0.35 M의 PZT 농도, 4 분의 UV 조사시간과 15 초의 용매 현상시간으로 졸-침투된 PZT 후막은 $800^{\circ}C$ 소결 온도에서 입자들의 성장에 의해 치밀화 정도가 증가되었다. 또한 PZT후막의 강유전 특성(잔류분극 및 항복 전압)도 향상되었다. 특히 잔류분극값은 스크린인쇄된 후막보다 약 4배정도 증가되었다. 이렇게 제작된 후막은 어레이타입의 압전형 마이크로미터크기의 센서 및 액츄에이터 등에 응용 가능성을 제시할 수 있었다.