• Journal of Digital Convergence
• /
• 제12권6호
• /
• pp.407-414
• /
• 2014

The aim of this study was to evaluate the photodynamic therapy effects against staphylococci using Photofrin and Radachlorin with Light emitting diode(LED). Experimental methods, The bacterial suspensions containing Staphylococcus aureus and Staphylococcus epidermidis at $1{\times}10^5$ were prepared and diluted to different concentrations of photosensitizer, Photofrin or Radachlorin, on 1.25, 2. 5,5 and $10{\mu}g/ml$. The bacterial suspensions were exposed to 630 and 670 nm LED light at the energy density of 14.4 and $19.8J/cm^2$, respectively. The CFU results of S. aureus and S. epidermidis were showed 33 and 50 colony forming at $5{\mu}g/ml$ of Photofrin, respectively and both of them perfectely were dead at $5{\mu}g/ml$ of Radachlorin. The fluorescent intensity by flow cytometry was showed the increase in the dead cells than the normal cells. In the TEM photograph, the damage of bacterial membrane and the distortion of cell morphology were observed. These results suggest that photodynamic therapy combine with Photofrin and Radachlorin can be applied a new modality for antibacterial therapy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권4호
• /
• pp.342-347
• /
• 2016

This paper dealt with the economic analysis on the application of shipboard LED (Light Emitting Diode) luminaires to replace incandescent and fluorescent lamps, which account for over 80 % of light source on a training or naval vessel. The rates of savings achieved in the power consumption, initial investment, maintenance cost, and fuel cost were analyzed. The break-even points and the $CO_2$ emissions were also calculated. For the training vessel, the initial investment was increased by 3.8 times, while the maintenance cost over five years was reduced by 51 %. When 40 %, 50 %, and 60 % of luminaires were turned on, the calculated break-even points were 11 months, 9 months, and 7 months, respectively. On the other hand, the initial investment was increased by 3.5 times while the maintenance cost over five years was saved by 55 % for the naval vessel. The break-even points were calculated as 15 months, 12 months, and 10 months, respectively. Moreover, the $CO_2$ emissions of the training and the naval vessels were reduced by 69 % and 65 %, respectively. From the results, it was revealed that the maintenance cost can be reduced by more than 50 %, and that the power consumption, fuel cost, and $CO_2$ emissions can be reduced by more than 60 % if LED luminaires are used on two types of vessels.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• 제29권4호
• /
• pp.14-23
• /
• 2016

Objectives : One of major complications of diabetes, diabetic ulcer is also one of the main reasons for amputation, and the prevalence rate is 4-10%. Laser therapy is widely used for leg ulcer and diabetic ulcer, and it is known to improve wound epithelialization, cellular content, and collagen deposition. The purpose of this study is to investigate the properties of the laser and the spectrum of laser instruments for diabetic ulcer. Methods : We performed literature search using the PubMed, Cochrane, CINAHL and Web of science for the data in English. In addition, other databases were checked for different languages such as OASIS and NDSL for the literature in Korean, CNKI in Chinese, and CiNii and J-STAGE written in Japanese. We excluded all review article and experimental studies, and only clinical studies using laser or light emitting diode (LED) for diabetic ulcer were selected. Results : A total twenty papers were selected. Different light sources were used as follows: LED, HeNe, InGaAlP, GaAlAs, GaAs, CO2, and KTP. The number of LED studies was 9, and HeNe laser was 7, and InGaAlP and GaAlAs laser was 2, GaAs, CO2, and KTP laser was 1 for each. Various energy density of the clinical study were reported. Conclusions : It is suggested that to select appropriate laser type and give the adequate output power to treat diabetic ulcer. Further evaluation and research for the condition of laser therapy to treat diabetic ulcers are warranted.

• Korean Journal of Optics and Photonics
• /
• 제21권1호
• /
• pp.26-32
• /
• 2010

Line lamps, which utilize leaky optical fibers based on periodic bending of plastic optical fibers, are proposed. The LED-optical fiber coupler, the key component of the line lamp, is designed and analyzed. The analysis by the Monte Carlo photon simulation method has shown that the optical coupling efficiency is affected rather sensitively by $\theta_w$, the slanting angle of the reflecting cup sidewall and $\rho_{ref}$, the reflectivity of the reflecting cup. The optical coupling efficiency of the coupler reaches the maximum when $\theta_w$ is about $60^{\circ}$, which is significantly larger than $\theta_w=45^{\circ}$, the typical sidewall slanting angle of the reflecting cup adopted in most LED lamps. When the reflectivity of the reflecting cup is above 0.8, the optical coupling efficiency is larger than 80%, which is the typical efficiency to be achieved in LD-optical fiber coupler.

• Science of Emotion and Sensibility
• /
• 제16권4호
• /
• pp.517-526
• /
• 2013

This paper reports on flexible plastic optical fiber (POF) fabric displays which are used to develop light-emitting clothing from photonic fabric. We first evaluated the luminescence value corresponding to different methods of processing flexible optical fibers, types of reflective fabric structure, and colors of the light. Moreover, we tried to identify the optimum conditions of the flexible POF fabric displays to realize high luminescence value. The processing methods that were compared were the "Pre-etching" method and the "Post-etching" method. On the basis of the reflective structure of the fabric, the fabrics were categorized as the "White fabric" and the "Reflective fabric." Analysis results showed that the effect of the processing method is more dominant than that of the types of reflective fabric structure. Further, the capability of the Post-etching method to increase luminescence value is slightly higher than that of the Pre-etching method. Further, the 'Reflective fabric' is slightly more efficacious as the base fabric to increase the luminescence value, than the White fabric is. Thus, optimum increase in luminance can be realized by employing the Post-etching method and the Reflective fabric as the base fabric.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제60권1호
• /
• pp.70-74
• /
• 2015

An LED plant factory farm is an alternative way to grow crops regardless of weather, season, and blight in such times of climate change. In recent years, it is a currently active and vibrant research field. The industry, which ranges from leaf vegetables to high value products, is expanding. This study was conducted to test tthe response of LED (Light-emitting diode) irradiation on the growth characteristics and ginsenoside levels indoors, in order to find out suitable light conditions. Ginseng seedling was transplanted from a styrofoam pot ($L{\times}W{\times}D$:$495{\times}315{\times}215mm$, inside diameter) into a closed plant production system in four blue LED (BL) and red LED (RL) different ratios of 1:1, 1;2, 1:3, 1:4 in a temperature range of $20{\sim}25^{\circ}C$, relative humidity of between 55 and 65%, and a 12-hour photoperiod. The LED irradiation shows the highest levels were found at 1:1 of BL and RL ratio at $61.21{\mu}mol\;s^{-l}m^{-2}$, 1:2 ratio $68.55{\mu}mol\;s^{-l}m^{-2}$, 1:3 ratio $63.85{\mu}mol\;s^{-l}m^{-2}$ and 1:4 ratio $62.41{\mu}mol\;s^{-l}m^{-2}$ from highest to lowest respectively. After analyzing from shoot and root 2 yers old ginseng plant which were cultivated under 1:3 irradiation of BL and RL ratio, it generally showed a positive effect under a 1:3 ratio of BL and RL.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.153-153
• /
• 2010

Recently, to develop GaN-based light-emitting diodes (LEDs) with better performances, various approaches have been suggested by many research groups. In particular, using the patterned sapphire substrate technique has shown the improvement in both internal quantum efficiency and light extraction properties of GaN-based LEDs. In this paper, we discuss the influences of the direction of the hexagonal-structure arrays of lens-shaped patterns (HSAPs) formed on sapphire substrates on the crystal, optical, and electrical properties of InGaN/GaN multi-quantum-well (MQW) LEDs. The basic direction of the HSAPs is normal (HSAPN) with respect to the primary flat zone of a c-plane sapphire substrate. Another HSAP tilted by 30o (HSAP30) from the HSAPN structure was used to investigate the effects of the pattern direction. The full width at half maximums (FWHMs) of the double-crystal x-ray diffraction (DCXRD) spectrum for the (0002) and (1-102) planes of the HSAPN are 320.4 and 381.6 arcsecs., respectively, which are relatively narrower compared to those of the HSP30. The photoluminescence intensity for the HSAPN structure was ~1.2 times stronger than that for the HSAP30. From the electroluminescence (EL) measurements, the intensity for both structures are almost similar. In addition, the effects of the area of the individual lens pattern consisting of the hexagonal-structure arrays are discussed using the concept of the planar area fraction (PAF) defined as the following equation; PAF = [1-(patterns area/total unit areas)] For the relatively small PAF region up to 0.494, the influences of the HSAP direction on the LED characteristics were significant. However, the direction effects of the HSAP became small with increasing the PAF.

• Journal of the Korean institute of surface engineering
• /
• 제53권4호
• /
• pp.131-137
• /
• 2020

A series of Dy³⁺, Sm³⁺, and Dy³⁺/Sm³⁺ doped Gd₂WO₆ phosphors were synthesized by the conventional solid-state reaction. The X-ray diffraction patterns revealed that all of the diffraction peaks could be attributed to the monoclinic Gd₂WO₆ crystal structure, irrespective of the type and the concentration of activator ions. The photoluminescence (PL) excitation spectra of Dy³⁺-doped Gd₂WO₆ phosphors contained an intense charge transfer band centered at 302 nm in the range of 240-340 nm and two weak peaks at 351 and 386 nm. Under an excitation wavelength of 302 nm, the PL emission spectra consisted of two strong blue and yellow bands centered at 482 nm and 577 nm. The PL emission spectra of the Sm³⁺-doped Gd₂WO₆ phosphors had a series of three peaks centered at 568 nm, 613 nm, and 649 nm, corresponding to the ⁶G_5/2 → ⁶H_5/2, ⁶G_5/2 → ⁶H_9/2, and ⁶G_5/2 → ⁶H_11/2 transitions of Sm³⁺, respectively. The PL emission spectra of the Dy³⁺- and Sm³⁺-codoped Gd₂WO₆ phosphors showed the blue and yellow emission lines originating from the ⁴F_9/2 → ⁶H_15/2 and ⁴F_9/2 → ⁴H_13/2 transitions of Dy³⁺ and reddish-orange and red emission bands due to the ⁴G_5/2 → ⁶H_7/2 and ⁴G_5/2 → ⁶H_9/2 transitions of Sm³⁺. As the concentration of Sm³⁺ increased from 1 to 15 mol%, the intensities of two PL spectra emitted by the Dy³⁺ ions gradually decreased, while those of the three emission bands due to the Sm³⁺ ions slowly increased, thus producing the color change from white to orange. The CIE color coordinates of Gd₂WO₆:5 mol% Dy³⁺, 1 mol% Sm³⁺ phosphors were (0.406, 0.407), which was located in the warm white light region.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제44권11호
• /
• pp.1725-1732
• /
• 2015

The bactericidal effects of 642, 521, and 461 nm LED were investigated on Escherichia coli O157:H7 and Staphylococcus aureus strains in TSB with pH 7.2, 4.0, and 3.5 for 10 h at $15^{\circ}C$. The bactericidal effect of 461 nm blue LED was the most pronounced compared to 642 nm and 521 nm LEDs at pH 3.5. When E. coli was exposed to pH 3.5 with 461 nm LED, populations of E. coli O157:H7 ATCC 43894 and 35150 decreased by 4 and 5 log CFU/mL for 2 h, respectively. Populations of E. coli ATCC 8739 decreased by 5 log CFU/mL for 2 h. Further, S. aureus ATCC 27664, 43300, and 19095 were inactivated by 4, 5 and 5 log CFU/mL for 2 h, respectively, at pH 3.5 with 461 nm LED. In conclusion, combined treatment with 461 nm LED and acidic conditions at low-temperature ($15^{\circ}C$) showed the greatest antimicrobial effects. This study suggests that LEDs may be potentially used as a method to maintain the safety of the food preservation technology.