• Land and Housing Review
• /
• v.4 no.1
• /
• pp.77-87
• /
• 2013

About 1,800 villages have released from Greenbelt since Greenbelt-reform-policy for readjustment of the area was promoted after 1997. Even though the government intended to attract planned development & improvement of these lifted villages through District Unit Plan and designating the lifted area as low-rise and low-density zoning considering the characteristics of the Greenbelt region, there are still many problems to be solved: a lack of funds, insufficient capability for self-improvement and unexecuted SOCs in long-term etc. It seems that these problems are caused by focusing on the lifting areas itself instead of researching deeply the condition and characteristics of the villages and searching proper direction/plans of improvement before lifting Greenbelt In addition, the existing plan of village improvement and management was not considering physical and spacial characteristics of the areas, social and economic situation of residents and relationship between the villages and surrounding cities, though these conditions are different among each villages, and the related regulations are applied uniformly across all the villages and those have been causing many civil appeals and environmental problems. In these respects, this study aims to consider the problems of the lifted villages using the existing researches on them and to make typology by characteristics-data of the villages and to establish improvement strategies of each types. In this study, the villages were classified into 5 types as a result of cluster analysis on 424 villages among all 1,800 through variables of locational potentiality : location, accessibility, size and form of village, condition of regulations etc. According to function of the villages, they were divided into 4 types: urban-type, rural-type, industrial-type and neighborhood-centered-type. This study also drew 4 improvement-strategy-types by combination of locational potentiality and village-function : type of improving life-environment, type of improving production-infra, type of inducing-planned-improvement and type of constructing center-of living-circle. Finally, this study suggested the directions of the each 4 types to desirable improvement and management which could be used to make and complement plans for village improvement.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.2
• /
• pp.110-119
• /
• 2012

The Plan and equipment of vertical lifting are very important in high-rise building construction site, and unmanned lifts usage is increasing for financial and efficient reason. However if lift stop position error occur, It can be accumulated. And the lift can not be available during an engineer fix the problem. So loss of time and cost will occur when lifts have problems. This paper reports an improved lift stop position sensing device for preventing loss of time and cost from lift stop position error. The result of tests showed that the system has a correction function of lift stop position error, and the accuracy of device which was developed in this paper was about 9.75mm better than existing equipment.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.5
• /
• pp.407-413
• /
• 2014

Appropriate selection of lifting equipments for a high-rise building construction project is one of the important factors to the project's success. Proper position of a tower crane on a construction site is so important to be determined by an expert or an experienced construction manager who draws working range of a tower crane and moves it over 2D(dimensional) site layout plan. 3D CAD, BIM, and virtual reality are is used for building design and construction, but it is not usual to use them for temporary facility planning or selection of a tower crane. This study proposes a suitable method to use augmented reality to select proper position of tower cranes. An augmented reality prototype is implemented by Vuforia and Unity 3D on a smart device to verify the practicability of the proposed method. The prototype application installed on a smart device shows several tower cranes on different markers in a real architectural drawing to locate the proper tower crane.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.513-521
• /
• 2021

The purpose of this study is to suggest an anti-aging health care plan through a literature analysis of the life activity system of Oriental Medicine. The source of normal maintenace, development, and change of the natural world and the human body's life activity process is the dynamical cooperative equilibrium of the internal Shen-Ji's discipline that creates, grows, changes, makes differences and stores(生长化收藏) and external Qi-Li's process of change from birth to growth, maturity to old age and ending of life(生長壯老已). Therefore, it was analyzed that the natural and human life activity processes are normally maintained, developed, and transformed. As a result, when the natural healing power of Genuine-Qi, the source of the human vitality, rises with the 'breathing massage' that combines a static breathing method which is anti-aging health care method applying the lifting entering movement of Qi and a dynamic abdominal massage, and it harmonizes the Shen-Ji which is the life process system and Qi-Li so that it is believed to be helpful in prolonging a healthy lifespan.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.314-324
• /
• 2021

Competition between ports around the world is intensifying to attract transshipment cargo. However, recently, there have been concerns about the departure of transshipment cargo volume at Busan Port, such as the lifting of the cabotage policy in China's shipping sector and the implementation of a safe fare system. In terms of operation, terminal congestion and vehicle waiting time are seriously occurring due to imbalance in the transshipment volume of each terminal and vehicles concentrated in a specific time period. In this paper, we propose a method of inter-terminal transportation (ITT) using buffer space to solve the problem caused by inefficient ITT systems and presented a mixed integer programming (MIP) for the problem. The effect of using the buffer space was analyzed for various work volumes and capacity fluctuation ranges by applying the terminal congestion pattern and ITT vehicle in/out pattern based on the Busan New Port data.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.171-178
• /
• 2023

In this paper, we propose a smart automated warehouse to maximize space utilization. Previous elevator-type automatic warehouses were designed with a maximum payload of 100kg on trays, which has the problem of extremely limiting the number of pallets that can be loaded within the space. In this paper, we design a smart warehouse that can maximize space utilization with a maximum vertical stiffness of 300kg. As a result of the performance evaluation of the implemented warehouse, the maximum payload was 500.6kg, which satisfied the original design and requirements, the lifting speed was 0.5m/s, the operating noise of the device was 67.1dB, the receiving and forwarding time of the pallet was 36.92sec, the deflection amount was 4mm, and excellent performance was confirmed in all evaluation items. In addition, the PLC control method, which designs the control UI and control panel separately, was integrated into the PC system to improve interoperability and maintainability with various process management systems. In the future, we plan to develop it into a fully automatic smart warehouse by linking IoT sensor-based logistics robots.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.172-178
• /
• 2021

In the ship repair market, interest in maintenance and repair is steadily increasing due to the reinforcement of prevention of environmental pollution caused by ships and the reinforcement of safety standards for ship structures. By reflecting this effect, the number of requests for repairs by foreign shipping companies increases to repair shipbuilders in the Southwest Sea. However, because most of the repair shipbuilders in the southwestern area are small and medium-sized companies, it is difficult to lead to the integrated synergy effect of the repair shipbuilding companies. Moreover, the infrastructure is not integrated; hence, using the infrastructure jointly is a challenge, which acts as an obstacle to the activation of the repair shipbuilding industry. Floating docks are indispensable to operating the repair shipbuilding business; in addition, most of them are operated through renovation/repair after importing aging caisson docks from overseas. However, their service life is more than 30 years; additionally, there is no structure inspection standard. Therefore, it is vulnerable to the safety field. In this study, the finite element analysis program of ANSYS was used to evaluate the structural safety of the modified caisson dock and obtain additional structural reinforcement schemes to solve the derived problems. For the floating docks, there are classification regulations; however, concerning structural strength, the regulations are insufficient, and the applicability is inferior. These insufficient evaluation areas were supplemented through a detailed structural FE-analysis. The reinforcement plan was decided by reinforcing the pontoon deck and reinforcement of the side tank, considering the characteristics of the repair shipyard condition. The final plan was selected to reinforce the side wing tank through the structural analysis of the decision; in addition, the actual structure was fabricated to reflect the reinforcement plan. Our results can be used as reference data for improving the structural strength of similar facilities; we believe that the optimal solution can be found quickly if this method is used during renovation/repair.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.4
• /
• pp.381-389
• /
• 2009

Confined spaces are inherently dangerous workplace and many fatal and nonfatal accidents have been reported. Even though these accidents occur in various kinds of confined spaces, there has rarely been reported on the health hazard agent, i.e., the types of gases and their concentration ranges. Therefore in this study, we evaluated several toxic and asphyxiating gas concentrations in various confined spaces. We surveyed 57 manholes, 3 sewage treatment plants, 2 yellow radish manufacturing companies and 7 barges to measure the concentrations of oxygen($O_2$), hydrogen sulfide($H_2S$), carbon monoxide(CO), ammonia($NH_3$). Lower Explosion Limits(LEL) and Volatile Organic Compounds (VOCs). Those four types of confined spaces occupies 56% of accidents during last 9 years in Korea. In 57 manholes, the concentration varied according to the types of manholes; rainfall and sewage, and by location; residential and industrial areas. Sewage manhole in industrial area was evaluated as the most hazardous than other types of manhole like rainfall manholes, residential sewage manholes. The highest $H_2S$ concentration and the lowest $O_2$ concentration at sewage manhole in industrial area were 300 ppm, 8.7% respectively. In 3 sewage treatment plants, $H_2S$ and $NH_3$ concentrations were reached up to the 500 ppm and 200 ppm respectively. Two yellow radish manufacturing companies showed the concentrations of 316 ppm, 505.2 ppm, 90 ppm and 15.7% for $H_2S$, CO, VOCs and $O_2$, respectively. Seven barges showed 15.9%~20.9% oxygen concentration. Gas species and concentration ranges varied by the types and location of confined spaces; CO, $H_2S$, $O_2$ could be hazardous in manhole, especially manhole connected to sewage plants. CO, $H_2S$, LEL, $O_2$, $NH_3$ should be controlled in sludge silo and sluge pumping confined spaces in sewage treatment plant. The activity of lifting out radish from the storage tank was evaluated more hazardous rather than the other activities in yellow radish manufacturing industry. The employers must conduct the survey to identify all possible confined spaces in their local workplace prior to performing the tasks. At the national level to reduce the accidents in the confined spaces, we suggest that systemic approach and active education program including possible hazards, standard operation procedures, ventilation plan, and personal protective equipment in confined spaces should be implemented.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.120-130
• /
• 2021

Recently, the government is reinforcing safety management at construction sites to prevent safety accidents in construction works, and the safety management plan of workers is an important situation. Meanwhile, modular construction is expected to be gradually expanded to middle and high-rise buildings, but active measures to ensure worker safety are insufficient. This study is a preliminary study of the development of a checklist for preventive worker safety management. The purpose of this study is to derive a checklist classification system for the safety management of workers in the field of modular construction by preceding studies, case analysis, and expert advisory opinions. The classification system consists of large categories of factory manufacturing, transportation, and on-site construction, and the sub-system consists of six sub-classes: foundation work, frame work, modular frame installation work, finishing work, and facility work. Among them, the sub-classification of modular frame installation work consists of 12 unit works, centering on module lifting and assembly module work, which are the main construction processes. And the classification system reflects the three main management factors and contents for defined safety management. It is expected that the research results of this study can contribute to efficient safety management at the modular construction site.