• Journal of Wetlands Research
• /
• v.9 no.1
• /
• pp.69-78
• /
• 2007

Constructed wetlands and other aquatic systems have been successfully used for waste and wastewater treatment in either temperate or tropical regions. To treat waste or wastewater in a sustainable manner, the integrated eco-engineering designs are explained in this paper with 2 case studies: (i) a combination of vertical-flow constructed wetland (CW) with plant irrigation systemfor fecal sludge management and (ii) integrated CW units with landscaping at full-scale application for domestic wastewater treatment. The pilot-scale study of fecal sludge management employed 3 vertical-flow CW units, each with a dimension of $5{\times}5{\times}0.65m$ (width ${\times}$ length ${\times}$ media depth) and planted with cattails (Typha augustifolia). At the solid loading rate of 250 kg total solids (TS)/$m^2.yr$ and a 6-day percolate impoundment, the CW system could achieve chemical oxygen demand (COD), TS and total Kjeldahl nitrogen (TKN) removal efficiencies in the range of 80 - 96%. The accumulated sludge layers of about 80 - 90 cm was found at the CW bed surface after operating the CW units for 7 years, but no clogging problem has been observed. The CW percolate was applied to 16 irrigation Sunflower plant (Helianthus annuus) plots, each with a dimension of $4.5{\times}4.5m$ ($width{\times}length$). In the study, the CW percolate were fed to the treatment plots at the application rate of 7.5 mm/day but the percolate was mixed with tap water at different ratio of 20%, 80% and 100%. Based on a 1-year data of 3-crop plantation were experimented, the contents of Zn, Mn and Cu in soil of the experimental plots were found to increase with increasing in CW percolate ratios. The highest plant biomass yield and oil content of 1,000 kg/ha and 35%, respectively, were obtained from the plots fed with 20% or 50% of the CW percolate, whereas no accumulation of heavy metals in the plant tissues (i.e. leaves, stems and flowers) of the sunflower is found. In addition to the pilot-scale and field experiments, a case study of the integrated CW systems for wastewater treatment at Phi Phi Island (a Tsunami-hit area), Krabi province, Thailand is illustrated. The $5,200-m^2$ CW systems on Phi Phi Island are not only for treatment of $400m^3/day$ wastewater from hotels, households or other domestic activities, but also incorporating public consultation in the design processes, resulting in introducing the aesthetic landscaping as well as reusing of the treated effluent for irrigating green areas on the Island.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.537-539
• /
• 2006

We developed an 4.5" $192{\times}64$ active matrix organic light-emitting diode display on a glass using organic thin-film transistor (OTFT) switching-arrays with two transistors and a capacitor in each sub-pixel. The OTFTs has bottom contact structure with a unique gate insulator and pentacene for the active layer. The width and length of the switching OTFT is $800{\mu}m$ and $10{\mu}m$ respectively and the driving OTFT has $1200{\mu}m$ channel width with the same channel length. On/off ratio, mobility, on-current of switching OTFT and on-current of driving OTFT were $10^6,0.3{\sim}0.5\;cm^2/V{\cdot}sec$, order of 10 ${\mu}A$ and over 100 ${\mu}A$, respectively. AMOLEDs composed of the OTFT switching arrays and OLEDs made using vacuum deposition method were fabricated and driven to make moving images, successfully.

• The Korean Journal of Malacology
• /
• v.28 no.4
• /
• pp.335-342
• /
• 2012

This study was conducted to estimation the selection response for growth-related traits in 31-month old of Pacific abalone, Haliotis discus hannai were born in 2008. In overall mean of surveyed traits and standard deviation showed $76.31{\pm}7.247$ mm of shell length, $49.48{\pm}5.307$ mm of shell width and $40.96{\pm}6.80$ g of total weight. The effect of sex and maturity were statistically significant in all traits include out a condition factor (p < 0.01). And In effect of sex, female were higher than male in all traits excepting condition factor, significantly. In correlation between breeding value and phenotypic value by each traits, showed rank correlation coefficient and simple correlation coefficient, which represented low positive correlation. A hopeful genetic improvement to the next generation showed 6.96 mm of shell length, 4.47 mm of shel width and 12.93 g of total weight. Therefor, It is considered that if considering properly selection intensity and selection ratio, efficient improvement could be made.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.196-196
• /
• 2017

Oilseed crop Camelina (Camelina sativa L.) is a suitable for biodiesel production that has high adaptability under low-nutrient condition like marginal land and requires low-input cost for cultivation. Enhanced abiotic stress tolerance of Camelina is very important for oil production under the wide range of different climate. CsRCI2s (Rare Cold Inducible 2) are related proteins in various abiotic stresses that predicted to localized at plasma membrane (PM) and endoplasmic reticulum (ER). These proteins are consist of eight-family that can be divided into tail (CsRCI2D/E/F/G) and no-tail (CsRCI2A/B/E/H) type of C-terminal. However, it is still less understood the function of C-terminal tail. In this study, CsRCI2D/H genes were cloned through gateway cloning system that used pCB302-3 as destination vector. And we used agrobacterium-mediated transformation system for generation of overexpression (OX) transformants. Overexpression of target gene was confirmed using RT-PCR and segregation ratio on selection media. We analyzed physiological response in media and soil under abiotic stresses using CsRCI2D and CsRCI2H overexpression plant. To compare abiotic stresses tolerance, wild type and CsRCI2D/H OX line seeds were sown on agar plate treated with various NaCl and mannitol concentration for 7 days. In the test of growth rate under abiotic stress on media, CsRCI2H OX line showed similar to NaCl and mannitol stress. In the other hand, CsRCI2D OX line showed to be improved stress tolerance that especially increased in 200mM NaCl but was similar on mannitol media. In greenhouse, WT and CsRCI2D/H OX lines for physiological analysis and productivity under abiotic stresses were treated 100, 150, 200mM NaCl. Then it was measured various parameters such as leaf width and length, plant height, total seed weight, flower number, seed number. CsRCI2H OX line in greenhouse did not show any changes in physiological parameters but CsRCI2D OX line was improved both physiological response and productivity under NaCl stress. Among physiological parameters of CsRCI2D OX line under NaCl stress, leaf length and width were observed shorter than WT but it were slightly longer than WT in 200mM NaCl stress. Furthermore, total seed weight of CsRCI2D OX line under stress displayed to decrease than WT in normal condition, but it was gradually raised with increasing NaCl stress then more than WT relatively. These results suggested CsRCI2D might be contribute to improve abiotic stress tolerance. However, function of CsRCI2H is need to more detail study. In conclusion, overexpression of CsRCI2s family can generate various environmental stress tolerance plant and may improve crop productivity for bio-energy production.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.344-344
• /
• 2014

Transparent amorphous oxide semiconductors such as a In-Ga-Zn-O (a-IGZO) have advantages for large area electronic devices; e.g., uniform deposition at a large area, optical transparency, a smooth surface, and large electron mobility >10 cm2/Vs, which is more than an order of magnitude larger than that of hydrogen amorphous silicon (a-Si;H).1) Thin film transistors (TFTs) that employ amorphous oxide semiconductors such as ZnO, In-Ga-Zn-O, or Hf-In-Zn-O (HIZO) are currently subject of intensive study owing to their high potential for application in flat panel displays. The device fabrication process involves a series of thin film deposition and photolithographic patterning steps. In order to minimize contamination, the substrates usually undergo a cleaning procedure using deionized water, before and after the growth of thin films by sputtering methods. The devices structure were fabricated top-contact gate TFTs using the a-IGZO films on the plastic substrates. The channel width and length were 80 and 20 um, respectively. The source and drain electrode regions were defined by photolithography and wet etching process. The electrodes consisting of Ti(15 nm)/Al(120 nm)/Ti(15nm) trilayers were deposited by direct current sputtering. The 30 nm thickness active IGZO layer deposited by rf magnetron sputtering at room temperature. The deposition condition is as follows: a rf power 200 W, a pressure of 5 mtorr, 10% of oxygen [O2/(O2+Ar)=0.1], and room temperature. A 9-nm-thick Al2O3 layer was formed as a first, third gate insulator by ALD deposition. A 290-nm-thick SS6908 organic dielectrics formed as second gate insulator by spin-coating. The schematic structure of the IGZO TFT is top gate contact geometry device structure for typical TFTs fabricated in this study. Drain current (IDS) versus drain-source voltage (VDS) output characteristics curve of a IGZO TFTs fabricated using the 3-layer gate insulator on a plastic substrate and log(IDS)-gate voltage (VG) characteristics for typical IGZO TFTs. The TFTs device has a channel width (W) of $80{\mu}m$ and a channel length (L) of $20{\mu}m$. The IDS-VDS curves showed well-defined transistor characteristics with saturation effects at VG>-10 V and VDS>-20 V for the inkjet printing IGZO device. The carrier charge mobility was determined to be 15.18 cm^2 V-1s-1 with FET threshold voltage of -3 V and on/off current ratio 10^9.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.339-342
• /
• 2002

This study was comparised physical properties of waxy black rice and waxy rice. In case of physical properties of kernels, weight, length, length/width ratio and volume of waxy black rice were higher than those of waxy rice but width and density were very similar. Moisture gain of kernels of waxy black rices was increased continuously to 40 min. at various soaking temperatures ($20{\sim}50^{\circ}C$) and the water uptake rate constants ($k_0$) of waxy black rices during storage at $20{\sim}50^{\circ}C$ were also increased. The water uptake rate constant ($k_0$) of waxy rice ($0.058\;min^{-1/2}$) was the more fast than that of waxy black rice ($0.033\;min^{-1/2}$) during storage at $4^{\circ}C$. Also hardness reduced rate constant($-k_0$) of waxy rice ($0.048\;min^{-1}$) were the more fast than that of waxy black rice ($0.022\;min^{-1}$) about two times.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.7 no.1
• /
• pp.90-96
• /
• 2005

Tubers(4-5cm diameter) of Zantedeschia 'Black Magic' were used to study the induction of flowering in GA₃ soaking times and concentration. The GA₃ soaking were 10 seconds and 30 minutes at the GA₃ concentrations of 50, 100, 250, and 500 mg·L¹. The time to emergence in GA₃ treatment were 1.1~4.0 days shorter than control Growth characteristics were good in GA₃ treatment but that was no significance in GA₃ soaking time and concentration. When GA₃ soaking time and concentration were increased, days to flowering was shorter, but flower stalk length, flower stalk width, flower length, flower width were no difference. The number of flower per tuber was most as 4.0~4.3 in 250~500 mg·L¹ GA₃ concentration and that was about 2 times compared to control. The normal flower ratio and bulb enlargement were similar compared with GA₃ soaking time and concentration. GA₃ 250~500 mg·L¹ treatment is necessary for improvement of number of flowers per bulb.

• Korean Journal of Plant Resources
• /
• v.32 no.6
• /
• pp.735-742
• /
• 2019

This study investigated a suitable method that could be applied for Asian chain fern [Woodwardia japonica (L. f.) Sm.] to propagate gametophytes and promote sporophyte formation. The gametophytes used in all experiments were obtained from germinated spores in vitro and were subcultured at 8-week intervals. The most appropriate media for gametophyte propagation was identified by culturing 300 mg of gametophyte in Murashige and Skoog (MS) basal medium (1/8, 1/4, 1/2, 1, 2), and Knop medium for 8 weeks. As a result, fresh weight of the gametophyte was increased by 56.7-fold on MS medium. Moreover, antheridium formation as well as gametophyte growth was improved on MS medium, especially. To improve the sporophyte formation ex vitro, 1.0 g of gametophyte was ground with distilled water and spread on eight combinations onto four different culture mediums, such as bed soil, peat moss, perlite and decomposed granite. Then generation and growth of sporophytes were investigated after cultivation for 10 weeks. As a result of this experiment, peat moss had a promotive effect of sporophyte formation at single-use and mixed culture soils. In particular, a mixture of bed soil, peat moss and perlite in a 1:1:1 ratio (v/v/v) led to the accelerated formation (782.5 ea/pot) and the frond growth of sporophytes. This included increases in length and width of fronds. However, promotive effect of gametophyte growth and sporophyte formation was not found at single-use and treatment with high ratio of bed soil.

• Parasites, Hosts and Diseases
• /
• v.56 no.5
• /
• pp.501-507
• /
• 2018

We described here the morphological characteristics for the species identification and fish hosts of Isoparorchis sp. (Digenea: Isoparorchiidae) in the Republic of Korea (Korea). Total 1,371 freshwater fishes collected in Yangcheon (Stream) in Sancheong-gun, Gyeongsangnam-do were examined by the artificial digestion methods to survey the infection status of digenetic trematode metacercariae for 4 years (2013-2016). Adult and larval worms of Isoparorchis sp. were detected in 38 (8.4%) out of 451 fish in 4 species, i.e., Pungtungia herzi, Acheilognathus koreensis, Squalidus japonicus coreanus and Odontobutis platycephala, examined. The infection density was 1.1 worm per fish infected. They were mainly found in the subcutaneous tissues and abdominal cavities. Nodules with worms in the subcutaneous tissues were revealed as the blue ink-colored bulges. Adults leaf-like, $21.6{\times}9.84mm$ in average size. The ratio of body length to body width was 2.20: 1. Oral sucker subterminal, $1.03{\times}1.22mm$. Pharynx muscular, $0.55{\times}0.54mm$. Esophagus very short. Ceca convoluted, terminated near the posterior end. Ventral sucker anterior 1/3.75, $1.99{\times}2.10mm$. The ratio of ventral sucker to oral sucker was 1.74: 1. Testes round to elliptical, both sides of ventral sucker, $1.43{\times}1.33mm$. Vitellaria highly dendritic, posterior 1/3 level. Eggs operculated, embryonated, $52{\times}32{\mu}m$ in size. By the present study, 4 fish species aforementioned are to be listed as the fish hosts of Isoparorchis sp. in Korea and additionally the morphological characteristics are to be described for the species identification.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.4
• /
• pp.377-386
• /
• 2015

In this study, inelastic buckling strength of HSA800 steel columns were tested to investigate the applicability of current column curve (KBC2009, 2010 AISC-LRFD) to HSA800 steel. Key test variables included width-thickness ratio, plate-edge restraints, and column slenderness ratio. Specimens made of ordinary steel (SM490) were also tested for comparison purposes. All the concentrically loaded HSA800 specimens exhibited sufficient buckling strength compared to the current column curve, but some of SM490 specimens showed understrength. This difference can be explained by the lower residual stress present in HSA800 specimens.