• 한국축산식품학회지
• /
• 제40권4호
• /
• pp.649-658
• /
• 2020

This study compared aroma compositions and sensory aroma attributes of raw and cooked Tenebrio molitor larvae (mealworms). Main sensory aroma attributes of raw mealworms were strong wet-soil-like, and less-intense oily, shrimp-like and sweet-corn-like. Quantitatively, the major aroma components of raw mealworms were hydrocarbons and aldehydes. As cooking proceeded, sweet-corn-like, roasted, and fried-oil-like sensory attributes were increasingly perceived with steaming, roasting, and frying, respectively. Some pyrazines, pyrrolidines, and carbonyls increased or appeared in roasted and fried mealworms. Partial least squares regression also showed differences in raw and cooked mealworms based on aroma components and their sensory attributes. Unlike raw mealworms, steamed mealworms had a relatively strong sweet-corn-like aroma attribute, which was related to 2,4,6-trimethyl-heptane, 2,4-dimethyl-dodecane, and 3,5-dihydroxy-6-methyl-2,3-dihydropyran-4-one. In comparison, roasted and fried mealworms exhibited roasted, shrimp-like, and fried-oil-like aroma attributes, which were associated with intermediates of the Maillard reaction and lipid oxidation, such as pyrazines, alcohols, and aldehydes. This result during thermal reactions was very similar to those of meat and/or seafood. The use of mealworms as a savory-type flavor enhancer can be expected.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1276-1276
• /
• 2001

Polycyclic aromatic hydrocarbons(PAHs) are widely distributed in the environment and are often implicated as potential carcinogens. The chromatographic methods of detection and quantitative determination of PAHs in environmental samples are costly, time consuming, and do not account for all kinds of PAHs. This work describes a quantitative spectroscopic method for the analysis of mixtures of eight PAHs using multivariate calibration models for Fourier transform near infrared(FT-NIR) spectral data. The NIR spectra of mixtures of PAHs (anthracene, pyrene, 1,2-benzanthracene, perylene, chrysene, benzo(a)pyrene, 1-methylanthracene and benzo(ghi)perylene) were measured in the wavelength range from 1100 nm to 2500 nm. The spectral data were processed using a partial least squares regression. We have studied the spectral characteristics of NIR spectra of mixtures of PAHs. It was possible to determine each PAM used in this study at the environmental level(mg L-1) in the laboratory samples. Further development may lead to the rapid determination of more PAHs in typical environmental samples.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.987-993
• /
• 2013

Integrity of the control and instrumental cables in nuclear power plant is important to maintain the stability of the nuclear power plants. In order to diagnose the integrity of the cables, the diagnostic methods based on reflectometry have been studied. The reflectometry is a non-destructive method and it is applicable to diagnose the live cables. We introduce a Gaussian enveloped linear chirp reflectometry to diagnose the cables in the nuclear power plants. In this paper, we estimate the instantaneous frequency of the Gaussian enveloped linear chirp signal by using the weighted robust least squares filtering to localize the impedance discontinuities in the class 1E instrumental cable.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.105-111
• /
• 2004

본 논문에서는 실제 전력 수요 데이터를 이용하여 유효전력에 단기 부하 예측함에 있어 무효전력이 중요한 역할을 하는 것을 회귀 분석 검정 통계량으로 증명한다. 무효전력의 공급과 수요는 계통의 전압과 아주 밀접한 관계를 가지고 있으므로 계통전압을 관리하고 계통의 신뢰도를 높이기 위해서는 예측된 무효전력 수요에 따라 무효전력 공급계획을 별도로 수립하여 운영해야 한다. 따라서 본 논문에서는 다중 시계열 모델을 이용한 시전 예측방법을 이용하여 설명변수로 유효전력을 사용하여 부하의 무효전력을 예측 하였다.

• 응용통계연구
• /
• 제15권2호
• /
• pp.269-279
• /
• 2002

다중 이상점 과 다중 지렛점의 식별은 가장효과(masking effect)와 편승효과(swamping effect)에 영향을 받으므로 어려움이 존재한다. Rousseeuw와 van Zomeren(1990)은 LMS (Least Median of Squares) 회귀방법과 MVE(Minimum Volume Ellipsoid) 통계량을 이용하여 다중 이상점과 다중 지렛점을 식별하였다. 그러나 이들의 방법은 LMS와 MVE의 강한 로버스트성으로 인하여 이상점과 지렛점이 아닌 점들도 이상점과 지렛점으로 식별하는 경향이 있다. Fung(1993)은 식별된 이상점과 지렛점들에 대하여 재확인방법을 제안하였는데 이 방법은 인근효과(adjacent effect)에 영향을 받아 이상점과 지렛점을 식별하는데 문제가 있는 것으로 분석되었다. 본 논문은 이러한 문제점을 지적하고 새로운 방법을 제안하여 식별된 이상점과 지렛점을 재확인하고자 한다.

• Smart Structures and Systems
• /
• 제14권5호
• /
• pp.831-845
• /
• 2014

This paper proposed a discrete wavelet transform based method for time-varying physical parameter identification of shear type structures. The time-varying physical parameters are dispersed and expanded at multi-scale as profile and detail signal using discrete wavelet basis. To reduce the number of unknown quantity, the wavelet coefficients that reflect the detail signal are ignored by setting as zero value. Consequently, the time-varying parameter can be approximately estimated only using the scale coefficients that reflect the profile signal, and the identification task is transformed to an equivalent time-invariant scale coefficient estimation. The time-invariant scale coefficients can be simply estimated using regular least-squares methods, and then the original time-varying physical parameters can be reconstructed by using the identified time-invariant scale coefficients. To reduce the influence of the ill-posed problem of equation resolving caused by noise, the Tikhonov regularization method instead of regular least-squares method is used in the paper to estimate the scale coefficients. A two-story shear type frame structure with time-varying stiffness and damping are simulated to validate the effectiveness and accuracy of the proposed method. It is demonstrated that the identified time-varying stiffness is with a good accuracy, while the identified damping is sensitive to noise.

• Smart Structures and Systems
• /
• 제22권3호
• /
• pp.315-326
• /
• 2018

This paper presents a novel time-domain method for the identification of plastic rotations and stiffness parameters of single-bay frames with nonlinear plastic hinges. Each plastic hinge is modelled as a pseudo-semi-rigid connection with nonlinear hysteretic moment-curvature characteristics at an element end. Through the comparison of the identified end rotations of members that are connected together, the plastic rotation that furnishes information of the locations and plasticity degrees of plastic hinges can be identified. The force consideration of the frame members may be used to relate the stiffness parameters to the elastic rotations and the excitation. The damped-least-squares method and damped-and-weighted-least-squares method are adopted to estimate the stiffness parameters of frames. A noise-removal strategy employing a de-noising technique based on wavelet packets with a smoothing process is used to filter out the noise for the parameter estimation. The numerical examples show that the proposed method can identify the plastic rotations and the stiffness parameters using measurements with reasonable level of noise. The unknown excitation can also be estimated with acceptable accuracy. The advantages and disadvantages of both parameter estimation methods are discussed.

• Journal of Multimedia Information System
• /
• 제2권3호
• /
• pp.255-262
• /
• 2015

The modern manufacturing systems and technologies produce products that are more accurate day by day. This can be reached mainly by improvement the manufacturing process with at the same time restricting more and more the quality specifications and reducing the uncertainty in part. The main objective an industry becomes to lower the part's variability, since the less variability - the better is product. One of the part of this task is measuring the object's uncertainty. The main purpose of this study is to understand the application of bootstrap method for uncertainty evaluation. Bootstrap method is a collection of sample re-use techniques designed to estimate standard errors and confidence intervals. In the case study a surface of an automobile engine block - (Top view side) is measured by Coordinate Measuring Machine (CMM) and analyzed for uncertainty using Geometric Least Squares in complex with bootstrap method. The designed experiment is composed by three similar measurements (the same features in unique reference system), but with different points (5, 10, 20) concentration at each level. Then each cloud of points was independently analyzed by means of non-linear Least Squares, after estimated results have been reported. A MatLAB software tool used to generate new samples using bootstrap function. The results of the designed experiment are summarized and show that the bootstrap method provides the possibility to evaluate the uncertainty without repeating the Coordinate Measuring Machine (CMM) measurements many times, i.e. potentially can reduce the measuring time.

• 한국정보과학회논문지:시스템및이론
• /
• 제33권10호
• /
• pp.768-776
• /
• 2006

연결 정보가 없는 포인트 데이타가 주어졌을 때, 본 논문은 MLS(moving least-squares) 근사화 기법을 이용하여 포인트 데이타에 대해 근사화된 표면을 생성한다. 근사화된 표면에서의 각 포인트에 대해 지역적인 곡률과 곡률 미분 값을 측정 한 후, 딜러니 삼각화(Delaunay tessellation)를 통해 이웃간의 정보를 생성하게 되고, 연결된 포인트들 간의 제로-클로싱(zero-crossing)을 측정하여 특징 포인트들을 추출하고, 곡률 방향으로 추출 된 포인트들을 연결한다. 본 방법은 기존의 메쉬 데이타에서 특징 선을 찾는 방법과 비슷한 복잡도를 갖는다. 몇 개의 포인트-샘플 된 모델에 대해 특징 선 추출을 수행하며, 곡률의 크기에 따라 특징선의 두께를 조절하고 포인트-스플릿팅 방법에 의해 렌더링 한다.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2520-2528
• /
• 2009

In this paper, we proposed tracking detection methodology using information granulation-based fuzzy radial basis function neural networks (IG-FRBFNN). According to IEC 60112, tracking device is manufactured and utilized for experiment. We consider 12 features that can be used to decide whether tracking phenomenon happened or not. These features are considered by signal processing methods such as filtering, Fast Fourier Transform(FFT) and Wavelet. Such some effective features are used as the inputs of the IG-FRBFNN, the tracking phenomenon is confirmed by using the IG-FRBFNN. The learning of the premise and the consequent part of rules in the IG-FRBFNN is carried out by Fuzzy C-Means (FCM) clustering algorithm and weighted least squares method (WLSE), respectively. Also, Hierarchical Fair Competition-based Parallel Genetic Algorithm (HFC-PGA) is exploited to optimize the IG-FRBFNN. Effective features to be selected and the number of fuzzy rules, the order of polynomial of fuzzy rules, the fuzzification coefficient used in FCM are optimized by the HFC-PGA. Tracking inference engine is implemented by using the LabVIEW and loaded into embedded system. We show the superb performance and feasibility of the tracking detection system through some experiments.