• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.1-7
• /
• 2019

Recently, multimedia streaming service has been activated, and the demand for high-quality multimedia convergence contents services is predicted to increase significantly in the future. The issues of the increasing network load due to the rise of multimedia streaming traffic must be addressed in order to provide QoS guaranteed services. To do this, an efficient network resource management and mobility support technologies are needed through seamless mobility support for heterogeneous networks. Therefore, in this paper, an MIH technology was used to recognize the network situation information in advance and reduce packet loss due to handover delays, and an ACLMIH-FHPMIPv6 is designed that can provide an intelligent interface through introducing a hierarchical mobility management technique in FPMIPv6 integrated network.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.31-42
• /
• 2006

This study originates from the following critical mind; what will the office of the future be like? and what technology will we rely upon most to communicate with colleagues or to access business information. In the office environment today, new technology has compelled new work paradigm and has greatly affected the capabilities of the individual to work in a more productive and efficient manner. However, even though new computer technology has changed the business world so rapidly, it is very difficult to see the changes that have been taken place. As an aim of the study, creating a mobile tool for office workers that successfully supports their work and communication was explored, and this study explored future work environment with a 5 years technological and social perspective. As a result of this study, the bON brings new visions to the mobile professionals via various interfaces. The bON, a mobile device, is both a system of work and of communication for office workers. The bON, as an integrated tool for working and communicating, forms the basis for a mobile information gateway that is equally capable of functioning as a mobile desk. The basic underlying idea is that all formal meeting places and hallways in the office are equipped with large wall-mounted screens. The bON collaborates with these media in various ways to enhance productivity and efficiency. The main challenge for the bON to enhance both mobility and quality of information is using new technology including bendable and flexible display and soft material display and sensors. To answer for the strong needs for mobility, the whole size of the device is fairly small while the screen is rolled inside the device. For Graphical User Interface, moreover, a new technique called Multi-layering Interface was adopted to stretch user's visual limits and suggests new direction in designing mobile device, equipped with small size display.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.20-29
• /
• 2009

This study was performed to evaluate the effect of the shrinkage stress induced by polymerization process of several light curing filling materials according to filling methods. High power light curing unit which has a plasma arc lamp was used and filling materials used were Filtek $Z-250^{(R)}$ composite resin, $Dyract^{(R)}$ AP compomer and $Tetric^{(R)}$ Flow flowable composite resin. Cavities were prepared on the permanent molars with width 3 mm, height 3 mm and depth 1.5 mm and the filling materials were filled with 1 step, 2 step layering technique and 3 step oblique filling methods. The results can be summarized as follows; 1. Strain values showed rapid increase from the start of light curing followed by gradual decrease afterwards with time. 2. Although the shrinkage stress value of $Z-250^{(R)}$ were shown to be relatively higher than $Dyract^{(R)}$ AP and $Tetric^{(R)}$ Flow, no statistically significant could be found between tested materials(p>0.05). 3. There were no statistically significant difference between 3 filling methods when using $Dyract^{(R)}$ AP and $Z-250^{(R)}$(p>0.05). 4. There were no statistically significant difference between shrinkage stress values obtained from samples prepared by different filling methods and materials(p>0.05).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1582-1594
• /
• 2005

The purpose of this study is to rediscover the value of form in fashion design by developing a new perspective of design appreciation. By examining and modifying the theories of Wolfflin and Belong, this paper tries to of for a new perspective for analyzing the characteristics of form in fashion designers' works. The three new perspective, Flat & Rounded, Closed & Opened and Part & Whole, can be used to analyze the formative aesthetic character of Vionnet's and Dior's works. Ten of Vionnet's and eleven of Dior's representative works selected and applied Delong's visual priority diagram to analyze their character. Vionnet and Dior, emphasized form and construction in their design and applied geometric shapes in their works. The main differences between Vionnet and Dior is that Vionnet's work transforms from geometric shapes in 2-dimentional space to drapery shapes in 3-dimensional space, Dior's work displays geometric shapes in 3-dimensional space. Vionnet created new formative art through the relationship between the clothes and human body. Vionnet's work has distinctively different qualities depending on whether the space is 2-dimensional or 3-dimensional showing transposition of form. In 2-dimensional space, Vionnet's works consist of triangles, rectangles and circles which are 'flat' and 'closed' in quality. These transform to solid forms by draping bias fabrics, which have a 'rounded' and 'open' quality. Dior tended to show artificial form rather than the natural lines of the body which is very different with Vionnet. Dior created clothes by using solid geometric form such as spheres, prisms, cylinders, pyramids and cubes in 3-dimensional space, which were visualized through constructive technique such as dart manipulation, boning, gathering, tucking, pleating, shirring and layering. Dior's works have their own form which does not relate with body shape. So his Works have a 'rounded' and 'closed' quality.

• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.33-42
• /
• 2017

Recently, the grounded electrical-source airborne transient electromagnetic (GREATEM) system with high power source was introduced to achieve deeper investigation depth and to overcome high noise level. Although the GREATEM is a transient electromagnetic system using a long grounded wire as the transmitter, GREATEM data have been interpreted with 1D earth models because 2D or 3D modeling and inversion of vast airborne data are complicated and expensive to calculate. Generally, 1D inversion is subsequently applied to every survey point and combining 1D images together forms the stitched conductivity-depth image. However, the stitched models often result in abrupt variations in neighboring models. To overcome this problem, laterally constrained inversion (LCI) has been developed in inversion of ATEM data, which can yield layered sections with lateral smooth transitions. In this study, we analysed the GREATEM data through 1D numerical modeling for a curved grounded wire source. Furthermore, we developed a laterally constrained inversion scheme for continuous GREATEM data based on a layered earth model. All 1D data sets and models are inverted as one system, producing layered sections with lateral smooth transitions. Applying the developed LCI technique to the GREATEM data, it was confirmed that the laterally constrained inversion can provide laterally smooth model sections that reflect the layering of the survey area effectively.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.9-14
• /
• 1977

The productive structure and the productivity of ${\times}$Populus albaglandulosa plantations, where are middle parts of the Korean peninsula, were studied by means of stratifying clip technique and of allometry. The densities of stands in the sample areas were 693 trees/ha in 6 year-old plantation and 527 or 625 trees/ha in 9 year-old one. The photosynthetic part of the productive structure was not shown normal conical form but layering. So this was efficient to transmit solar radiation into the stand floor. The standing crop of the terrestrial parts of 6 year-old plantation was 18.11 ton/ha and that of 9 year-old one 38.8 to 47.3 ton/ha. The wood volume to trunk to 6 year-old was $31.3m^3/ha$ and that of 9 year-old was 68.8 to $83.9m^3/ha$. The annual net production of 6 year-old plantation was 4.8 ton/ha/year and that of 9 year-old one was 10.0 to 11.7 ton/ha/year and its wood volume of trunks was 17.9 to $21.1m^3/ha/year$. In the 9 year-old plantation the standing crop or the annual net production was different between two sample areas. This seemed that the cause was not due to chemical character but to physical character of soil.

• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.525-543
• /
• 2008

Recently, the scope of user interface is increasing the relative importance in software development dramatically. As a result, there are various relative technologies like as SWING, MFC, Web 2.0, and etc. However, most current software developments are progressed in separate development process with user interface part and business part respectively. This causes the problems, like as a difficulty in the integration process, an development period's delay, and a poor reusability for the constructed models. That is, the extendability and reusability of the created models is being decreased because UI modeling is not systematic and hierarchical, and the consistent integration technique between UI modeling and business modeling does not supported. To solve these problems, this paper proposes an unified and systematic UI modeling process based on UML, using the hierarchical metamodel according to the abstraction levels of development phase. We suggest an UI metamodel, which contains a hierarchy by layering the modeling elements in PIM and PSM based on maturity degree of the development. An hierarchical modeling process combined UI modeling and business modeling is built by applying the UI and business metamodel in terms of three modeling phases(concept/specification/concrete). The effectiveness of the modeling process is shown by applying the proposed process into an Internet Shopping Mall System. Through the exploratory results, the hierarchical UI metamodel and process can produce systematic and layered UI models. This can improve the quality and reusability of models.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.273-279
• /
• 2010

Purpose: The purpose of this in vitro study was to compare the marginal adaptation of a ceramic-pressed-to-metal restoration with traditional metal-ceramic restoration. Materials and methods: Duplicating the prepared resin tooth, 20 metal dies were fabricated. Twenty metal copings of 2 groups which were metal ceramic restoration and pressed to metal restoration were fabricated. The marginal opening of each coping was measured with Microscope (BX 60M-36E $41D^{(R)}$: Olympus, Japan). After porcelain build-up, the marginal opening of metal ceramic restoration and pressed to metal restoration ($PoM^{(R)}$: Ivoclar vivadent., Liechtenstein) were also evaluated in the same method. The measurements were analyzed using Wilcoxon Signed Ranks test and Mann-Whitney U test. Results: Within the limits of this study, the results were as follows. 1. Metal-ceramic restorations in coping state ($64.93{\pm}12.48\;{\mu}m$) in compared with Metal ceramic restorations after porcelain build-up ($63.43{\pm}12.86\;{\mu}m$) had no significant difference in marginal adaptation. 2. Pressed-metal-ceramic restorations in coping state ($50.00{\pm}12.28\;{\mu}m$) in compared with Pressed metal ceramic restorations after porcelain build-up ($56.72{\pm}13.80\;{\mu}m$) had no significant difference in marginal adaptation. 3. Metal-ceramic restorations in compared Pressed-metal-ceramic restorations had no significant difference in marginal adaptation. Conclusion: Pressed-metal-ceramic restorations have the advantage of being technically less change through using of the lost-wax technique and this allows for the convenience of a full-contour ceramic wax-up as opposed to the more technique-sensitive layering method. Pressed-metal-ceramic restorations may be considered in clinic on the basis of the result of this study and the advantage of this system.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.87-94
• /
• 2009

The purpose of this study was to assess the current materials, methods and difficulties according to the year of licence and educational background of Korean dentists in Class II direct composite resin restorations. Total 17 questions were included in the questionnaire. Questions were broadly divided into two parts: first. operator's information. and second. the materials and methods used in Class II posterior composite restoration. The questionnaire was sent to dentists enrolled in Korean Dental Association via e-mail. Total 12,193 e-mails were distributed to dentists. 2,612 e-mails were opened, and 840 mails (32.2%) were received from respondents. The data was statically analyzed by chi-square test using SPSS(v. 12.0.1, SPSS Inc. Chicago, IL, USA). Male dentists among respondents was 79%. 60.3% of the respondents acquired their licences recently (1998-2007), and 77% practiced in private offices. 83.4% have acquired their knowledge through school lectures, conferences and seminars. For the Class II restorations, gold inlays were preferred by 65.7% of respondents, while direct composite resin restorations were used by 12.1 % amalgam users were only 4.4% of respondents. For the restorative technique, 74.4% of respondents didn't use rubber dam as needed. For the matrix. mylar strip (53.4%), metal matrix (33.8%) and Palodent system (6.5%) were used. 99.6% of respondents restored the Class II cavity by incremental layering. Obtaining of the tight interproximal contact was considered as the most difficult procedure (57.2%) followed by field isolation (21 %). Among various bonding systems, 22.6% of respondents preferred SE Bond and 20.2% used Single Bond. Z-250 was used most frequently among a variety of composite resins.