• Journal of the Korean Wood Science and Technology
• /
• 제31권5호
• /
• pp.35-42
• /
• 2003

본 연구는 전보(정 등, 2002)에서 제조된 직물유리섬유 강화집성재의 박리 및 수분 흡착특성을 조사해 보기 위해서 실시되었다. 침지 박리시험에서, 3가지 형태의 소재 모두 박리를 나타내지 않았지만, control재를 제외한 모든 형태의 소재는 삶음 박리에서 박리가 발생하였다. 수분흡착시험은 40℃, 상대습도 90% 조건에서 48시간동안 실시하였다. 횡단면 흡습성은 모든 소재에서 다르지 않았다. 유리섬유로 된 소재에서 방사단면과 접선단면은 control재와 비교하여 수분 흡착이 지연되었다. 수분흡착 이방성에서, 유리섬유 함입된 소재는 적은 수분흡착을 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.449-456
• /
• 2016

본 연구의 목적은 국산 구조용 집성재를 대상으로, 제조과정의 탄소배출을 정량화하고 탄소배출 저감방안을 제시하는 것이다. 총 2개소의 구조용 집성재 제조업체를 대상으로 원료, 수송, 제조 공정, 제조에 의한 에너지소비량 등을 현장 실사하였다. 현장에서 수집한 자료 및 구축된 전과정목록과 같은 관련문헌을 토대로 단위부피당 탄소배출을 정량화하였다. 국산 구조용 집성재의 제재 및 건조, 집성 공정별 온실가스 배출결과는 각각 31.0, 109.0, 94.2 kg $CO_2eq./m^3$으로 나타났다. 수입 구조용 집성재와 비교하였을 때 약 13% 온실가스를 적게 배출하는 것으로 나타났다. 또한 기존의 건조 에너지원을 바이오매스로 전환시에는 기존 대비 37%의 온실가스를 감축하여 친환경성을 제고할 수 있을 것으로 판단되었다. 본 결과는 향후 목조주택의 환경성을 규명하기 위한 전과정평가 수행 시, 투입된 목재제품의 전과정목록분석을 위한 기초자료로 활용될 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제49권1호
• /
• pp.93-102
• /
• 2021

In this article, withdrawal resistances of axially loaded self-tapping screws on wood products made by Korean Larch were predicted with existing estimation equation, and compared with experimental test data. The research was required because no design methodology for the withdrawal resistance of self-tapping screw is present in Korean building code (KBC). First, the withdrawal resistance of wood screw was predicted to use the withdrawal design value estimation equation in National Design Specification for Wood Construction (NDS). Second, three types of wood products, solid wood, cross-laminated timber (CLT) and plywood, were utilized for withdrawal test. For decades, various engineered wood products have been developed, especially cross-laminated timber (CLT) and hybrid timber composites such as timber composites of solid wood and plywood. Therefore, CLT and plywood were also investigated in this study as well as solid wood. Finally, the predicted values were compared with experimentally tested values. As the results, the tested values of solid wood and CLT were higher than the predicted values. In contrast, it is inaccurate to predict withdrawal resistance of plywood since prediction was higher than tested values.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.682-690
• /
• 2015

The bonding performance of two types of wood adhesives, namely phenol-resorcinol-formaldehyde (PRF) resin and melamine-urea-formaldehyde (MUF) resin for glued laminated timber manufactured by high frequency (HF) heating was evaluated. The HF heating system consists of HF oscillator with dielectric heating system for curing adhesives, and hydraulic press system for clamping glued laminated timber. The designed frequency and output power of the HF system was as 5 MHz and 60 kW, respectively. To verify dielectric heating mechanism under HF oscillation, the heat loss factors of laminae and adhesives were measured. The results show that it is possible to selectively heat adhesives for their curing due to the remarkably higher loss factor of the adhesives than those of wood laminae. The temperature of adhesive in the bonding line reached up to the set temperature within a few seconds by high frequency oscillating, which advanced the curing of adhesive afterwards. The bonding performance, such as shear strength of bonding line, water soaking delamination, and boiling water soaking delamination of PRF resin met the requirement of Korean Standard (KS), however the MUF resin did not meet the KS requirement of boiling water soaking delamination. These results indicate that the HF heating system is successful to manufacture glued laminated timbers with PRF resins to meet the bonding requirements.

• 국제초고층학회논문집
• /
• 제9권1호
• /
• pp.87-93
• /
• 2020

Professionals who work in the realm of tall building design and construction are well aware that high-rises are the best solution for accommodating growing urban populations. Until recently, few would have thought to include tall wood buildings as part of that solution, but there is growing awareness that tall mass timber structures can help satisfy the need for density while addressing the need-equally urgent-for a more sustainable built environment. This paper examines the trend toward tall wood buildings in the United States, including their history and international influences, market drivers, structural performance, and economic viability, as well as building code changes that allow wood structures up to 18 stories. It highlights examples of mass timber projects, with an emphasis on benefits that impact return on investment.

• 한국건축시공학회지
• /
• 제24권3호
• /
• pp.331-341
• /
• 2024

본 연구에서는 구조용 집성재 보의 휨강도 및 연성능력을 보완하고자 강재-목재 합성보의 휨성능을 평가하였다. 실험체는 구조용 집성재 보 1식과 강재-목재 합성보 2식으로 구성하였다. 강재-목재 합성보는 부착 방법에 따라 액상형 접착제와 나사못을 사용하여 휨성능을 평가하였다. 실험결과, 강재-목재 합성보는 구조용 집성재 보에 비하여 구조성능이 약 2~3배 높아 휨강도 및 연성능력이 충분히 확보된 것으로 나타났다. 또한, 액상형 접착제를 사용한 경우가 나사못을 적용한 실험체에 비하여 우수한 구조성능을 보여주었다.

• Journal of the Korean Wood Science and Technology
• /
• 제50권3호
• /
• pp.167-178
• /
• 2022

To investigate the influence of manufacturing environment on bonding performance of mixed cross laminated wood (CLT) using polyurethane (PUR) adhesive, a boiling water soak delamination test according to the temperature and relative humidity was conducted. The 5-ply mixed CLT consisted of Japanese Larch for external and middle layer and yellow poplar for internal layer. The PUR adhesives with different opening times of 10 and 30 minutes were used. The mixed CLT was manufactured according to pressing times of PUR and manufacturing environments of summer and winter. In case of summer environment, the delamination rate of the mixed CLT with pressing time of 4 hours using a PUR adhesive with open time of 10 minutes met the requirements of KS F 2081. In case of winter environment, the delamination rate of the mixed CLT didn't meet the requirements of KS standard. However, it was possible to confirm the effect of improving the adhesive performance by adjusting the pressing time according to the open time of the adhesive under the manufacturing conditions. The delamination rate of CLT with open time 30 minutes PUR, manufactured by indirect moisture supply methods was 11.2% better than direct moisture supply methods. As a result of delamination test in the same condition of relative humidity and adhesive, it was found that the temperature of manufacturing environment influences the adhesive performance.

• Journal of the Korean Wood Science and Technology
• /
• 제51권2호
• /
• pp.81-97
• /
• 2023

The aim of this study were to evaluate tannin resorcinol formaldehyde (TRF) for the preparation of cross-laminated timbers (CLTs) made from fast-growing tree species and to analyze the physical and mechanical properties of CLTs. TRF copolymer resin was prepared by using the bark extracts of Swietenia mahagoni (L.) Jacq. It was observed that the TRF adhesive possessed less solid content (23.59%), high viscosity (11.35 poise), and high pH values (10.0) compared to the standard phenol resorcinol formaldehyde. The TRF adhesive was applied to produce CLTs with the addition of 15% tapioca and flour as an extender. The six-layered CLTs were produced from sengon (Falcataria moluccana Miq.), jabon [Anthocephalus cadamba (Roxb) Miq.], coconut (Cocos nucifera L.), and the combination of coconut-jabon and coconut-sengon wood. The analysis of variance revealed that the layer composition of CLT significantly affected the physical and mechanical properties of the beam. While the modulus of rupture met the standard, the moisture content and modulus of elasticity values did not fulfill JAS 1152-2007. All of the CLTs produced in this study demonstrated low formaldehyde emission, ranging from 0.001 mg/L to 0.003 mg/L, thereby satisfying the JAS 1152 for structural glue laminated timber.

• Journal of the Korean Wood Science and Technology
• /
• 제52권4호
• /
• pp.301-318
• /
• 2024

Contrary to other materials like metals, glass, etc., wood continuously interacts with the environment, increasing and decreasing its moisture content according to the humidity of the air and changing its dimensions by swelling or shrinking. Water diffusion through laminated solid wood is crucial in wood bonding processes. The adhesive layer might block the diffusion if the water vapor diffusion is perpendicular to the bond line. As a result of this blockage, different proportions of deformation appear on the two sides of the bond line, which causes stresses in the bonded assembly. The question arises of how long the bonded structure will keep its integrity due to moisture diffusion blockage, inevitable tensions appearing in the glue line, and how these stresses could be avoided. With cross laminated timber (CLT) solid wood panel production, this question gains new importance. Despite the relevance, only a limited number of publications are available. Comprehensive research would also be necessary considering both the molecular structure and diffusion properties of the adhesive adjusted to the wood species (covering possible substituting wood species, too). Overall, this review serves as a resource for enhancing our understanding of water vapor diffusion through wood adhesive layers and provides insights that have implications for reducing stresses in bonded wood assemblies and the performance of the bonded group over time. Furthermore, identifying knowledge gaps is necessary to establish the basis for investigating the diffusion property of CLT panels.

• Coupled systems mechanics
• /
• 제4권2호
• /
• pp.191-209
• /
• 2015

Hybrid girders can be constructed in different geometrical forms and from different materials. Selection of beam's effective constellation represents a complex process considering the variations of geometrical parameters, changes of built in material characteristics and their mutual relations, which has important effect on the behavior of the girder. This paper presents the theoretical and experimental research on behavior of the timber-steel hybrid girders' different geometrical constellation with external prestressing and in different conditions of timber moisture. These researches are based on linear elastic analysis, and further refine by using the plasticity and damage models.