DOI QR코드

DOI QR Code

Prediction of Withdrawal Resistance of Single Screw on Korean Wood Products

  • AHN, Kyung-Sun (Department of Agriculture, Forestry and Bioresources, Seoul National University) ;
  • PANG, Sung-Jun (Department of Agriculture, Forestry and Bioresources, Seoul National University) ;
  • OH, Jung-Kwon (Department of Agriculture, Forestry and Bioresources, Seoul National University)
  • Received : 2020.11.25
  • Accepted : 2021.01.16
  • Published : 2021.01.25

Abstract

In this article, withdrawal resistances of axially loaded self-tapping screws on wood products made by Korean Larch were predicted with existing estimation equation, and compared with experimental test data. The research was required because no design methodology for the withdrawal resistance of self-tapping screw is present in Korean building code (KBC). First, the withdrawal resistance of wood screw was predicted to use the withdrawal design value estimation equation in National Design Specification for Wood Construction (NDS). Second, three types of wood products, solid wood, cross-laminated timber (CLT) and plywood, were utilized for withdrawal test. For decades, various engineered wood products have been developed, especially cross-laminated timber (CLT) and hybrid timber composites such as timber composites of solid wood and plywood. Therefore, CLT and plywood were also investigated in this study as well as solid wood. Finally, the predicted values were compared with experimentally tested values. As the results, the tested values of solid wood and CLT were higher than the predicted values. In contrast, it is inaccurate to predict withdrawal resistance of plywood since prediction was higher than tested values.

Keywords

References

  1. American Wood Council. 2018. National Design Specification for Wood Construction with Commentary 2018 Edition. Leesburg, VA 20175.
  2. Cha, J.K. 2013. Predicting the Screw Withdrawal Load of Commercial Particleboard Manufactured in Korea. Journal of the Korean Wood Science and Technology 39(3): 252-257. https://doi.org/10.5658/WOOD.2011.39.3.252
  3. Chang, S.J., Wi, S., Lee, J., Lee, H., Cho, H., Kim, S. 2017. Analysis of cooling and heating energy demands of wooden houses with cross-laminated Timber (CLT) using domestic plywood as core materials. Journal of the Korean Society of Living Environmental System 24(6): 752-759. https://doi.org/10.21086/ksles.2017.12.24.6.752
  4. Choi, C., Yuk. C.R., Yoo, J.C., Park, J.Y., Lee, C.G., Kang, S.G. 2015. Physical and Mechanical Properties of Cross Laminated Timber Using Plywood as Core Layer. Journal of the Korean Wood Science and Technology 43(1): 86-95. https://doi.org/10.5658/WOOD.2015.43.1.86
  5. Choi, G.W., Yang, S.M., Lee, H.J., Kim, J.H., Choi, K.H., Kang, S.G. 2018. A Study on the Block Shear Strength according to the Layer Composition of and Adhesive Type of Ply-Lam CLT. Journal of the Korean Wood Science and Technology 48(6): 791-806. https://doi.org/10.5658/wood.2020.48.6.791
  6. Choi, Y.S., Park J.W., Lee, J.H., Shin, J.H., Jang, S.W. Kim, H.J. 2018. Preparation of EVA/Intumescent/Nano-Clay Composite with Flame Retardant Properties and Cross Laminated Timber (CLT) Application Technology. Journal of the Korean Wood Science and Technology 46(1): 73-84. https://doi.org/10.5658/WOOD.2018.46.1.73
  7. Galih, N.M., Yang, S.M., Yu, S.M., Kang, S.G. 2020. Study on the Mechanical Properties of Tropical Hybrid Cross Laminated Timber Using Bamboo Laminated Board as Core Layer. Journal of the Korean Wood Science and Technology 48(2): 245-252. https://doi.org/10.5658/WOOD.2020.48.2.245
  8. Iswanto, A.H., Hakim, A.R., Azhar, I., Wirjosentono, B., Prabuningrum, D.S. 2019. The Physical, Mechanical, and Sound Absorption Properties of Sandwich Particleboard (SPb). Journal of the Korean Wood Science and Technology 48(1): 32-40. https://doi.org/10.5658/WOOD.2020.48.1.32
  9. Jang, S.S., Lee, H.W. 2018. Withdrawal-resistance of lag screws. Inje, Republic of Korea, 2018 Proceedings of the Korean Society of Wood Science and Technology Fall Meeting, pp. 21.
  10. Jang, S.S., Lee, H.W. 2019. Lateral Resistance of CLT Wall Panels Composed of Square Timber Larch Core and Plywood Cross Bands. Journal of the Korean Wood Science and Technology 47(5): 547-556. https://doi.org/10.5658/wood.2019.47.5.547
  11. Jung, H.J., Song, Y.J., Hong, S.I. 2019. Effect of Glass Fiber-Reinforced Connection on the Horizontal Shear Strength of CLT Walls. Journal of the Korean Wood Science and Technology 48(5): 685-695. https://doi.org/10.5658/WOOD.2020.48.5.685
  12. Kang, C.W., Jang, S.S., Kang, H.Y., Li, C. 2019. Sound Absorption Rate and Sound Transmission Loss of CLT Wall Panels Composed of Larch Square Timber Core and Plywood Cross Band. Journal of the Korean Wood Science and Technology 47(1): 33-39. https://doi.org/10.5658/WOOD.2019.47.1.33
  13. KS F ISO 9087. 2004. Determination of nail and screw holding power under axial load application for wood, International Organization for Standardization.
  14. Lee, I.H., Song, Y.J., Song, D.B., Hong, S.I. 2020. Results of Delamination Tests of FRP- and Steel-Plate-Reinforced Larix Composite Timber. Journal of the Korean Wood Science and Technology 47(5): 655-662. https://doi.org/10.5658/wood.2019.47.5.655
  15. Lestari, A.S.R., Hadi, Y.S., Hermawan, D., Santoso, A. 2018. Physical and Mechanical Properties of Glued Laminated Lumber of Pine (Pinus merkusii) and Jabon (Anthocephalus cadamba). Journal of the Korean Wood Science and Technology 46(2): 143-148. https://doi.org/10.5658/WOOD.2018.46.2.143
  16. Mclain, T.E. 1998. Design axial withdrawal strength from wood: I. Wood screws and lag screws. Forest products journal 47(5): 77-84
  17. Oh, J.K., Kim, G.C., Kim, K.M., Lee, J.J., Hong J.P. 2017. End Distance of Single-shear Screw Connection in Cross Laminated Timber. Journal of the Korean Wood Science and Technology 45(6): 746-752. https://doi.org/10.5658/WOOD.2017.45.6.746
  18. Pang, S.J., Ahn, K.S., Kang, S.G., Oh, J.K. 2020. Prediction of withdrawal resistance for a screw in hybrid cross-laminated timber. Journal of Wood Science 66: 1-11. https://doi.org/10.1186/s10086-020-1848-7
  19. Pang, S.J., Kim, K.M., Park, S.H., Lee, S.J. 2017. Bending Behavior of Nailed-Jointed Cross- Laminated Timber Loaded Perpendicular to Plane. Journal of the Korean Wood Science and Technology 45(6): 728-736. https://doi.org/10.5658/WOOD.2017.45.6.728
  20. Prabuningrum, D.S., Massijaya, M.Y., Hadi, Y.S., Abdillah, I.B. 2020. Physical-Mechanical Properties of Laminated Board Made from Oil Palm Trunk (Elaeis guineensis Jacq.) Waste with Various Lamina Compositions and Densifications. Journal of the Korean Wood Science and Technology 48(2): 196-205. https://doi.org/10.5658/WOOD.2020.48.2.196
  21. Qi, Y., Huang, Y.X., Ma, H.X., Yu, W.J., Kim, N.H., Zhang, Y.H. 2019. Influence of a Novel Mold Inhibitor on Mechanical Properties and Water Repellency of Bamboo Fiber-based Composites. Journal of the Korean Wood Science and Technology 47(3): 336-343. https://doi.org/10.5658/WOOD.2019.47.3.336
  22. Rammer, D. R., Winistorfer, S.G., Bender, D.A. 2001. Withdrawal strength of threaded nail. Journal of structural engineering 127(4): 442-449. https://doi.org/10.1061/(asce)0733-9445(2001)127:4(442)
  23. Ringhofer, A., Brandner, R., and Schickhofer, G. 2015. Withdrawal resistance of self-tapping screws in unidirectional and orthogonal layered timber products. Materials and Structures 48(5): 1435-1447. https://doi.org/10.1617/s11527-013-0244-9
  24. Seo, J.W., Gang, G.W., Jo, G.H., Park, H. 2018. Study on the Physical and Mechanical Properties of Particleboard and Oriented Strandboard Manufactured by Tulliptree (Liriodendron tulipifera L.). Journal of the Korean Wood Science and Technology 46(1): 67-72. https://doi.org/10.5658/WOOD.2018.46.1.67
  25. Suh, J.S., Hwang, S.W., Hwang, K.H., Jeong, G.Y., Joung, H.H. 2012. Shear strength of nailed connection of domestic plywood as a substitute for OSB. Journal of the Korean Wood Science and Technology 40(4): 287-293. https://doi.org/10.5658/WOOD.2012.40.4.287
  26. Taj, M.A., Najafi, S.K., Ebrahimi, G. 2009. Withdrawal and lateral resistance of wood screw in beech, hornbeam and poplar. European Journal of Wood and Wood Products 67: 135-140. https://doi.org/10.1007/s00107-008-0294-9