• Journal of Korean Library and Information Science Society
• /
• v.49 no.2
• /
• pp.105-129
• /
• 2018

Efforts to establish a joint preservation facility for library materials are being discussed in the regional representative libraries recently, but this is mainly a movement in public libraries. This study aimed to provide a model for a joint preservation facility construction and management especially for the National Universities Library in Busan/Gyeongnam area. For this job, after analyzing the current situation, this study focuses on 1) estimated size of the planned facility calculated by investigating the size and equipment, operation policy, collection quantity and saturation status of participating library archives, 2) strategies for construction, proposed a joint preservation architecture construction management model such as organization and human resources, and standards for transferring materials.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.8 no.2
• /
• pp.172-188
• /
• 2001

Purpose: The purpose of this research was to test the effectiveness of the nursing intervention, mutual goal setting, for patients who have had a mastectomy. Special reference was given to King's goal attainment theory and a theoretical framework for establishing an effective nursing strategy to enhance patient recovery is suggested. Method: This research employed a quasi-experimental design which consisted of pretest-posttest non-equivalent control and experimental groups. Data were collected from 37 patients who had a mastectomy and were hospitalized in the Department of Surgery of Y Medical Center from January 2001 to May 2001. The experimental group received the nursing intervention, mutual goal setting four times from the day before the operation to the fifth day after the operation while the control group received only routine nursing care. As postoperative recovery indicators, ROM of arm joints, arm circumference, pain, physical symptoms, oxygen saturation stress, anxiety and body image were measured. Result: The test results are as follows : 1) there were statistically significant differences between the experimental and control groups in extension and internal rotation of the shoulder Joint and flexion of the wrist joint. 2) there was no significant difference between the two groups in arm circumference. 3) there were no significant differences between the two groups in pain, physical symptoms, or oxygen saturation. 4) there were no significant differences between the two groups in stress, anxiety, or body Image. On the basis of research results, the following are recommended : 1) The effectiveness of nursing intervention in the acute recovery period as well as long term effects need to be investigated. 2) There is a need to develop an instrument to measure perception which facilitates goal attainment in the interactive setting between patients and nurses.

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.220-228
• /
• 2002

Thermal flow through jointed rock mass was analyzed by numerical methods. The effect of a single set of joints on the heat conduction was analyzed by one-dimensional model and compared with the analytical solution. When a joint is completely dry, the joint behaves as a thermal break inducing jumps in temperature distribution even at steady state. Therefore when joints are completely dry, individual joint has to be taken into consideration to get a good result. When joints are partially or fully saturated, the thermal conductivity of the joints increases drastically and the jumps in temperature distribution become less severe. Therefore the effect of joint in heat conduction can be well absorbed by continuum anisotropic model whose thermal properties represent overall thermal properties of the intact part and the discontinuities. Since the effect of joints becomes less important as the degree of the saturation increases, the overall thermal response of the rock mass also becomes close to isotropic. Therefore it can be concluded that a great effort has to be made to obtain a precise in-situ thermal properties in order to get a good prediction of the thermal response of a jointed rock mass.

• Tunnel and Underground Space
• /
• v.20 no.6
• /
• pp.434-445
• /
• 2010

Underground compressed air energy storage (CAES) system in a lined rock cavern is considered one of the promising large-scale energy storage technologies. In this study, permeabilities of concrete lining block and its construction joint, which are the major components of an air tightness system of the undeground CAES, were measured from a model experiment. From the experiment, it was found that intrinsic permeability of construction joint was larger than that of concrete block by the order scale of $10^1{\sim}10^4$, so that it would be very important to control the quality of construction joints in-situ in order to secure air tightness of storage system. And the permeability of construction joint could be decreased as low as that of the concrete block by pasting an acryl-type adhesive on bonding surfaces. Higher degrees of water saturation of the concrete block resulted in the lower permeability, which is more preferable in the viewpoint of air tightness of storage cavern.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.1
• /
• pp.30-34
• /
• 2009

This paper deals with charging and persistent-current mode operating characteristics of BSCCO magnet load using high-temperature superconducting (HTS) power supply. The HTS power supply consists of two heater-triggered switches, an iron-core transformer with the primary copper winding and the secondary BSCCO solenoid, and a BSCCO magnet load. The magnet load was fabricated by double pancake winding and its inductance is about 21 mH. A hall sensor was installed at the middle of the magnet load to measure the current in the load. In order to investigate the efficient pumping characteristics, operating tests of heater-triggered switch with respect to dc heater current were carried out, and the electromagnet current was determined by considering saturation characteristics of its iron core. The saturation characteristics of charged current in the magnet load were observed with respect to various pumping periods: 12 s, 14 s, 24 s and 32 s. After charging the magnet load, the persistent current was measured. The operating characteristics of the persistent current mode were mainly determined by joint resistance and magnet load.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.58-68
• /
• 2011

As part of basic studies of monitoring carbon dioxide ($CO_2$) storage using electrical and seismic surveys, laboratory experiments have been conducted to measure resistivity and P-wave velocity changes due to the injection of $CO_2$ into water-saturated sandstone. The rock sample used is a cylinder of Berea sandstone. $CO_2$ was injected under supercritical conditions (10 MPa, $40^{\circ}C$). The experimental results show that resistivity increases monotonously throughout the injection period, while P-wave velocity and amplitude decrease drastically due to the supercritical $CO_2$ injection. A reconstructed P-wave velocity tomogram clearly images $CO_2$ migration in the sandstone sample. Both resistivity and seismic velocity are useful for monitoring $CO_2$ behaviour. P-wave velocity, however, is less sensitive than resistivity when the $CO_2$ saturation is greater than ~20%. The result indicates that the saturation estimation from resistivity can effectively complement the difficulty of $CO_2$ saturation estimations from seismic velocity variations. By combining resistivity and seismic velocity we were able to estimate $CO_2$ saturation distribution and the injected $CO_2$ behaviour in our sample.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.34 no.4
• /
• pp.55-75
• /
• 2023

This study proposes the establishment of a joint preservation library in the Chungcheongbuk-do region. It aims to transfer low-utilization materials from various libraries in Chungcheongbuk-do to the joint preservation library, thereby improving the efficiency of existing spaces and actively supporting the educational curriculum of school libraries. To achieve this, the study conducted document analysis, a status survey, and case analysis. The research results indicate that a reasonable standard for the accommodating capacity of the preservation library space is calculated at 280 volumes per square meter. Specifically, an initial transfer of 45,580 volumes for public libraries and 121,894 volumes for school libraries is proposed, totaling 167,474 volumes. Depending on the saturation levels of Chungcheongbuk-do Office of Education-affiliated public libraries and school libraries, the initial volume is determined to be 167,477 volumes, with an annual increase of 10% calculated over 30 to 50 years after the library's opening.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.11
• /
• pp.753-763
• /
• 2015

This paper proposes a decentralized robust adaptive neural network control scheme using multiple radial basis function neural networks for electrically driven robot manipulators with bounded input voltages in the presence of uncertainties. The proposed controller considers both robot link dynamics and actuator dynamics. Practically, the controller gain coefficients applied at each joint may be nonlinear time-varying and the input voltage at each joint is saturated. The proposed robot controller overcomes the various uncertainties and the input voltage saturation problem. The proposed controller does not require any robot and actuator parameters. The adaptation laws of the proposed controller are derived by using the Lyapunov stability analysis and the stability of the closed-loop control system is guaranteed. The validity and robustness of the proposed control scheme are verified through simulation results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.513-519
• /
• 2021

Metallic suture anchors are very useful and common fixation devices that are inserted into the target bone to sustain the tendon of a patient with musculus supraspinatus tendon ruptures. On the other hand, the presence of a metallic material prosthesis, such as a metal suture anchor, causes severe MR imaging artifacts, including field distortion, signal loss, and failure of fat suppression. The difference in magnetic susceptibility between metal and other organic materials causes magnetic field distortion surrounding the prosthesis. The resulting magnetic field inhomogeneity makes the images with a lower signal-to-noise ratio and distortion. For a patient with a suture anchor implanted, MR imaging is the golden standard for determining the postoperative prognosis, and a fat-saturation sequence is one of the imaging methods most affected by metal-induced artifacts. In this study, three fat-saturation sequences were compared. Artifact quantification and contrast comparison between the supraspinatus tendon and the surrounding muscle were presented. The images obtained using the STIR pulse sequence showed fewer susceptibility artifacts and better visibility in the supraspinatus tendon and the tissue area. Therefore, the STIR sequence is the most appropriate fat-saturation imaging method for patients with a metallic prosthesis.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.3
• /
• pp.19-32
• /
• 2003

In the conventional photorefractive joint transform correlator(PRJTC), the intensity ration of input signal-to-pump beam should be large enough to saturate two-beam coupling transfer function to obtain a desired correlation result. As a result, the signal-to-noise ratio(SNR) of correlation result is decreased in a noisy input image. In this paper, we propose the improved method for increasing the SNR of the PRJTC by using the characteristics of BaTiO$_3$. We stop the energy transfer saturating by low intensity ratio of input beam and realize a short length of effective interaction in BaTiO$_3$ by making large incident angle of the signal beam. So the gain in high frequency area is decreased and the gain in low frequency area comes up to the saturation gain of the beam coupling transfer function. Therefore the SNR is improved in noisy input image and the PRJTC can be easily realized by low intensity ratio of input beam.