• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1255-1261
• /
• 2016

Recently, the energy harvesting technology in which energy is collected from the wireless signal which is transmitted by mobile communication devices, has been considered as a novel way to improve the life time of wireless sensors by mitigating the lack of power supply problem. In this paper, we consider the optimal sensing time and power allocation problem for cognitive radio systems, where the energy efficiency of secondary user is maximized while the constraint are satisfied, using the optimization technique. Based on the derived optimal solutions, we also have proposed an iterative resource allocation algorithm in which the optimal power and sensing time allocation can be found without excessive computations. The simulation results confirm that the proposed scheme achieves the optimal performance and it outperforms the conventional resource allocation schemes in terms of energy efficiency while the constraints are guaranteed to be satisfied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1039-1044
• /
• 2013

We propose a cancellation algorithm based on Alamouti coded OFDM to mitigate ICI due to Frequency Offset (FO) between distributed antennas in the frequency selective fading channel. In the cancellation algorithm, the interference signal is estimated by using the initial detection symbol and then the estimated interference signal is subtracted from the received signal. As the accuracy of initial symbol increases, ICI cancellation becomes more significant. Therefore, the accuracy of the initial detection symbols is very important in the cancellation algorithm. The proposed scheme improves the accuracy of the initial detection symbol by employing an ICI self-cancellation scheme. The proposed cancellation scheme with only one iteration achieves better performance compared to the conventional cancellation schemes with many times iterations based on the conventional Alamouti coded OFDM.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.31-39
• /
• 2012

DVC(Distributed Video Coding) techniques have been attracting a lot of research works since these enable us to implement the light-weight video encoder and to provide good coding efficiency by introducing the feedback channel. However, the feedback channel causes the decoder to increase the decoding complexity and requires very high decoding latency because of numerous iterative decoding processes. So, in order to reduce the decoding delay and then to implement in a real-time environment, this paper proposes several parity bit estimation methods which are based on the temporal correlation, spatial correlation and spatio-temporal correlations between LDPCA frames on each bit plane in the consecutive video frames in pixel-domain Wyner-Ziv video coding scheme and then the performances of these methods are compared in fast DVC scheme. Through computer simulations, it is shown that the adaptive spatio-temporal correlation-based estimation method and the temporal correlation-based estimation method outperform others for the video frames with the highly active contents and the low active contents, respectively. By using these results, the proposed estimation schemes will be able to be effectively used in a variety of different applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.11
• /
• pp.972-978
• /
• 2012

LDPC (low density parity check) code shows near Shannon limit performance by iterative decoding based on sum-product algorithm (SPA). Message updating procedure between variable and check nodes in SPA is done by a scheduling method. LDPC code shows different performance according to scheduling schemes. The conventional researches have been shown that the shuffled BP (belief propagation) algorithm shows better performance than the standard BP algorithm although it needs less number of iterations. However the reason is not analyzed clearly. Therefore the reason of difference in performance according to LDPC decoding algorithms is analyzed in this paper. 4 cases according to satisfaction of parity check condition are considered and compared. As results, the difference in the updating procedure in a cycle in the parity check matrix is considered to be the main reason of performance difference.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.61-68
• /
• 2019

Currently many companies are interested in reduction of the carbon emissions associated with their supply chain activities such as transportation and operations. Operational decisions, such as modifications in order quantities could an effective way in reducing carbon emissions in the supply chain. Cap-and-trade regulation, sometimes called emissions trading, is a market-based tool to limit greenhouse gas emissions. Under cap-and-trade regulation, emission credits are allocated to the firms and the firms trades emissions under cap-and-trade schemes. In this paper, we propose a single-manufacturer single-buyer two-echelon supply chain problem under the cap-and-trade mechanism incorporating the carbon emissions caused by transportation and warehousing activities where a single manufacturer produces a family of items in order to deliver a family of items to a single buyer at a fixed interval of time for effective implementation of Just-In-Time (JIT) Purchasing. An integrated multi-product lot-splitting model of facilitating multiple shipments in small lots between buyer and manufacturer is developed in a JIT Purchasing environment. Also, an iterative heuristic algorithm is developed to derive the common order interval, the number of intervals for each product and the number of shipments between the buyer and the manufacturer during the common interval. A numerical example is given to illustrate the savings in reduction of total cost and carbon emissions by the inventory model incorporating cap-and-trade mechanism compared to the classical inventory model. The proposed inventory model could be useful for the practical solution of two-echelon supply chain inventory problem under cap-and-trade mechanism.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.5 s.311
• /
• pp.52-61
• /
• 2006

Orthogonal wavelet tansform which is generally used in image and signal processing applications has limited performance because of lack of shift invariance and low directional selectivity. To overcome these demerits complex wavelet transform has been proposed. In this paper, we present an efficient image denoising method using dual-tree complex wavelet transform and Bernoulli-Gauss prior model. In estimating hyper-parameters for Bernoulli-Gaussian model, we present two simple and non-iterative methods. We use hypothesis-testing technique in order to estimate the mixing parameter, Bernoulli random variable. Based on the estimated mixing parameter, variance for clean signal is obtained by using maximum generalized marginal likelihood (MGML) estimator. We simulate our denoising method using dual-tree complex wavelet and compare our algorithm to well blown denoising schemes. Experimental results show that the proposed method can generate good denoising results for high frequency image with low computational cost.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.2 s.48
• /
• pp.21-29
• /
• 2006

It is impractical to install sensors on every floor of a tall building to measure the full state vector because of the large number of degrees of freedom. This makes it necessary to introduce reduced order control. A kind of system reduction scheme (dynamic condensation method) is proposed in this paper. This method is iterative and Guyan condensation is looked upon as an initial approximation of the iteration. Since the reduced order system is updated repeatedly until a desired one is obtained, the accuracy of the reduced order system resulting from the proposed method is much higher than that obtained from the Guyan condensation method. An eigenvalue shilling technique is applied to accelerate the convergence of Iteration. Two schemes to establish the reduced order system by using the proposed method are also presented and discussed in this paper. The results for a tail building with active tuned mass damper show that the proposed method is efficient for the reduced order modelling and the accuracy is very close to exact only after two iterations.

• Computational Structural Engineering
• /
• v.9 no.1
• /
• pp.151-159
• /
• 1996

A finite element formulation based on the CFT(Compression Field Theory) concept such as the effect of compression softening in cracked concrete, and macroscopic and rotating crack models etc. was presented for the nonlinear behaviour of structural concrete. In this category, tangential or secant material stiffnesses for cracked concrete were also defined and discussed in view of the iterative solution schemes for nonlinear equations. Considering the computational efficiency and the ability of modelling the post-ultimate behaviour as major concerns, the incremental displacement solution algorithm involving initial material stiffnesses and the relaxation procedure for fast convergence was adopted and formulated in a type of 8-noded quadrilateral isoparametric elements. The analysis program NASCOM(Nonlinear Analysis of structrual Concrete by FEM : Monotonic Loading) developed baed on the CFT constitutive relationships and the incremetal solution strategy described enables the predictions of strength and deformation capacities in a full range. crack patterns and their corresponding widths, and yield extents of reinforcement. As the verfication purpose of NASCOM, the prediction of Cervenka's panel test results including the load resistance and the deformation history was made. A limited number of predictions indicate a good correlation in a general sense.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.7-16
• /
• 2000

This paper described a design and implementation of the division/square-root for a redundant floating point binary number using high-speed quotient selector. This division/square-root used the method of a redundant binary addition with 25MHz clock speed. The addition of two numbers can be performed in a constant time independent of the word length since carry propagation can be eliminated. We have developed a 16-bit VLSI circuit for division and square-root operations used extensively in each iterative step. It performed the division and square-toot by a redundant binary addition to the shifted binary number every 16 cycles. Also the circuit uses the nonrestoring method to obtain a quotient. The quotient selection logic used a leading three digits of partial remainders in order to be implemented in a simple circuit. As a result, the performance of the proposed scheme is further enhanced in the speed of operation process by applying new quotient selection addition logic which can be parallelly process the quotient decision field. It showed the speed-up of 13% faster than previously presented schemes used the same algorithms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.3
• /
• pp.16-21
• /
• 2010

In this paper, the linear source and relay precoders are designed for AF MIMO relay systems. In order to minimize mean squared error (MSE) of received symbol vector, the source and relay precoders are proposed, and MMSE receiver which is suitable to those precoders is utilized at the destination node. As the optimal precoders for source and relay nodes are not represented in closed form and induced by iterative method, we suggest a simple precoder design scheme. Simulation results show that the performance of the proposed precoding scheme is comparable with that of optimal scheme and outperforms other relay precoding schemes. Moreover, in high SNR region, it is revealed that SNR between source and relay node is more influential than SNR between relay and destination node in terms of bit error rate.