• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.1
• /
• pp.64-69
• /
• 2006

Due to the inherent nonlinear nature of Electro-rheological (ER) fluid dampers, one of the challenging aspects for utilizing these devices to achieve high system performance is the development of accurate models and control algorithms that can take advantage of their unique characteristics. In this paper, the nonlinear damping force model is made to identify the properties of the ER damper using higher order spectrum. The higher order spectral analysis is used to investigate the nonlinear frequency coupling phenomena with the damping force signal according to the sinusoidal excitation of the damper. Also, this paper presents an inverse model of the ER damper, i.e., the model can predict the required voltage so that the ER damper can produce the desired force for the requirement of vibration control of vehicle suspension systems. The inverse model is constructed by using a multi-layer perceptron neural network. A quarter-car suspension model is considered in this paper for analysis and simulation. Simulation results show that the proposed inverse model of ER damper can obtain control voltage of ER damper for required damping force.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.443-446
• /
• 2003

Conventional disturbance rejection methods have to derive the inverse model of a system. However, the inverse model of n nonholonomic system is not unique, because an inverse it changes depending on initial conditions and desired values. A kind of internal model control (IMC) using feedback error learning is discussed for the motion control of nonholonomic mobile robots in this paper, The present method is different from a conventional IMC whose control system consists of an inverse model, a direct model and a filter. The present disturbance rejection method need not use a direct model, where the remaining two elements are composed of the same inverse model based on neural networks.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.88.5-88
• /
• 2001

We propose a neural network solver for an inverse problem. The problem is that input data with complete teaching include defects and predict the defect value. The solver is constructed of a three layer neural network whose learning method is combined from BP and reconstruction learning. The input data for the defects are unknown; therefore, the circulation of an arithmetic progression replaces them; rightly, the learning procedure is not converged for the circulation data vut for the normal data. The learning is quitted after such a learning status id kept. Then, we search a minimum of the differences between teaching data and output of the circulation. Then, we search a minimum of the ...

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.123-131
• /
• 2012

As the price of traditional fuels soar, the alternatives are becoming more viable. And manufacturers are promoting the growing viability of electric and biofuel-powered vehicles through longer warranties. Now, these longer green environment (emission)warranties, sometimes called extended warranties or "super warranties," have been adapted. The main result of this paper is to present a new method to approximate a bivariate warranty function by using Radial Basis Function Network with application of Radon Transform and its inverse which is used to reduce the dimension of the warranty space. This method consist of the following stages: First, by using the Radon Transform, the bivariate warranty function can be reduced to one dimensional function. Second, each of the one dimensional functions is approximated by using neural network technique into neural sub-networks. Third, these neural sub-networks are combined together to form the final approximation neural network. Four, by using the inverse of radon transform to this final approximation neural network we get the approximation to the given function. Also, we apply the above method to some green warranty data of automotive vehicle company.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.233-237
• /
• 2012

In this paper, We propose a control system which compensate a output of a main Neual Network using a RTDNN(Recurrent Time Delayed Neural Network) with a FLC(Fuzzy Logic Controller)After a learn of main neural network, it can occur a Over shoot or Under shoot from a disturbance or a load variations. In order to adjust above case, we used the fuzzy compensator to get an expected results. And the weight of main neural network can be changed with the result of learning a inverse model neural network of plant, so a expected dynamic characteristics of plant can be got. We can confirm good response characteristics of proposed neural network controller by the results of simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.818-824
• /
• 2014

The solution of brachistochrone problem turned out the form of a cycloid but correct angle values of bead can be obtained from the table form of inverse relations for the complicated nonlinear equations. To enhance the accuracy, this paper employs the neural network to represent the inverse relation of the complicated nonlinear equations. The accurate minimum-time control is possible with the interpolation property of the neural network. For various final target points, we have found that the proposed method is superior to the conventional ones through the computer simulations.

• Advances in Computational Design
• /
• v.5 no.3
• /
• pp.291-304
• /
• 2020

In this paper, we develop models to design the airfoil using Multilayer Feed-forward Artificial Neural Network (MFANN) and Support Vector Regression model (SVR). The aerodynamic coefficients corresponding to series of airfoil are stored in a database along with the airfoil coordinates. A neural network is created with aerodynamic coefficient as input to produce the airfoil coordinates as output. The performance of the models have been evaluated. The results show that the SVR model yields the lowest prediction error.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.24-29
• /
• 1990

In this paper ,ie propose a hybrid position/force controller of a robot manipulator using double-layer neural network. Each layer is constructed from inverse dynamics and Jacobian transpose matrix, respectively. The weighting value of each neuron is trained by using a feedback force as an error signal. If the neural networks are sufficiently trained it does not require the feedback-loop with error signals. The effectiveness of the proposed hybrid position/force controller is demonstrated by computer simulation using a PUMA 560 manipulator.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.533-536
• /
• 1998

The intent of this paper is to describe a neural network structure called dynamic neural processor(DNP), and examine how it can be used in developing a learning scheme for computing robot inverse kinematic transformations. The architecture and learning algorithm of the proposed dynamic neural network structure, the DNP, are described. Computer simulations are provided to demonstrate the effectiveness of the proposed learning using the DNP.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.1 s.109
• /
• pp.67-72
• /
• 2005

In the grade change operations inputs and outputs are highly correlated and application of conventional linear feedback control methods such as PID schemes might lead to poor control performance. In this study the neural networks model for the grade change operation is trained by using bilinear terms which can represent non-linear characteristics of grade change operations. The inverse model of the grade change operation is obtained from training and the optimal input variables are computed from the trained neural networks as well. The proposed bilinear inverse model predictive control scheme was found out to showlittle discrepancy between simulated outputs and setpoints.