• 생물환경조절학회지
• /
• 제19권4호
• /
• pp.234-239
• /
• 2010

분무경시스템에서 분무간격과 분무시간은 식물의 생육어l 필요한 양분과 수분을 공급하기 위한 중요한 요소들이다. 이 실험은 분무경에서 분무간격이 팔레놉시스 유묘의 생육에 미치는 영향에 대하여 알아보고자 수행되었다. 배지 없이 뿌리가 나출된 생체중 16g 크기의 유묘를 사용하였다. 분무간격은 각각 10, 20, 30, 40, 50분 간격이었으며, 분무시간은 10분이었다. 총생체중, 총건물중, 분지된 뿌리수와 상대생장률은 20분과 30분 간격에서 10분, 40분, 50분 간격보다 높았다. 특히, 뿌리의 생체중은 30분 간격에서 기장 높았다. 엽장은 30분 간격에서 길었으나, 엽폭은 처리간 차이가 없었다. 10분 간격 처리에서 유묘 한 개체가 30일간 소비한 물량은 0.71L였으며, 분무간격이 증가함에 따라 그 양은 감소하였다. 15일간 소비된 양분은 칼륨이외에는 처리간 차이가 없었으며, 칼륨은 30분 간격에서 가장 많이 흡수되었다. 결과를 요약하면, 분무경 시스템에서 팔레놉시스 유묘 생산을 위한 적정 분무간격은 30분이었다.

• 정보통신설비학회논문지
• /
• 제11권2호
• /
• pp.29-33
• /
• 2012

ECG widely used in cardiac function test is a graph that is recorded by measuring the electrical impulses occurred in the heart. Normal ECG has the form of similar sections that are repeated, and each section has the information occurred in a heart beat. Thus, In order to make the correct diagnosis, correct grasp of the sections and formed analysis must be done. In this research, a system that detects the sections of ECG is proposed. The system is based on ECG stored in the form of files. The ECG can easily have a noise caused by an outside factor. The noise of ECG is easily caused by external factors. Through a band-pass filter, it can be removed. and then, to get this ECG without a noise, interval detection algorithm using R-peak is applied. The clean, intuitive interface will help the above functions to be used without any difficulties.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.67-70
• /
• 2008

As a part of the project on road tunnel fire safety system development, Quantitative Risk Assessment program was developed. In this study, We carried out Quantitative Risk Assessment with this program by using a factor of cross passage interval, warning announcement time and congestion ratio etc for 1km tunnel with natural ventilation. In the case of 250m below of cross passage interval, Risk value due to warning announcement time was a slightly changed. but if cross passage interval is more than 250m, expected fatalities in the same HRR(heat release rate) was sharp increased. As a result, Quantitative Risk Assessment program which was developed in this research project is possible to risk assessment with ventilation type, cross passage for evacuation and detection system response property etc. hereafter, this program look forward to use as a tool for road tunnel performance based design.

• 대한음성학회지:말소리
• /
• 제56호
• /
• pp.147-158
• /
• 2005

In this paper, we are focused to develop the simplified speaker verification algorithm without background speaker models, which will be adopted in the portable speaker verification system equipped in portable terminals such as mobile phone and PMP. According to the tolerance interval analysis, the population of someone's speaker model can be represented by a suitable number of selected independent samples of speaker model. So we can make the representative speaker model and threshold under the specified confidence level and coverage. Using proposed algorithm with the number of samples is 40, the experiments show that the false rejection rate is $3.0\%$ and the false acceptance rate $4.3\%$, worth comparing to conventional method's results, $5.4\%\;and\;5.5\%$, respectively. Next step of research will be on the suitable adaptation methods to overcome speech variation problems due to aging effect and operating environments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1849-1850
• /
• 2008

Type-2 퍼지 집합은 Type-1 퍼지 집합의 확장으로 Type-1 퍼지 집합으로는 다루기 힘든 언어적인 불확실성을 다루기 위해 고안되었다. 대표적인 퍼지 논리 시스템(Fuzzy Logic System; FLS)으론 Mamdani FLS 모델과 TSK FLS모델이 있다. 본 논문에서는 Interval Type-2 TSK FLS를 구성한다. FLS 구성을 위한 전반부는 가우시안 형태의 Type-2 멤버쉽 함수를 사용하며, 전.후반부 파라미터들은 오류역전파 알고리즘을 통한 학습으로 결정한다. 본 논문에서는 Type-1 TSK FLS와 Interval Type-2 TSK FLS를 설계하고 가스로 공정 데이터에 적용하여 성능을 비교 분석한다. 또한 노이즈를 추가한 데이터들을 통하여 노이즈에 대한 성능도 비교 분석한다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국지능시스템학회 2008년도 춘계학술대회 학술발표회 논문집
• /
• pp.362-365
• /
• 2008

In the conventional fuzzy system reliability analysis, the reliabilities of the fuzzy systems and the components of fuzzy systems are represented by real values between zero and one, fuzzy numbers, vague sets, interval valued fuzzy sets, etc. This paper propose a method to represent and analyze the reliabilities of the fuzzy systems based on the internal valued vague sets defined in the universe of discourse [0, 1]. In the interval valued vague sets, the upper bounds and the lower bounds of the conventional vague sets are represented as the intervals, therefore it can allow the reliabilities of a fuzzy system to represent and analyze in a more flexible manner.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.113-118
• /
• 2001

사용중인 교량의 안전성, 사용성, 내구성을 확보하기 위한 시발점은 교량에 대한 점검과 진단이다. 본 논문에서는 최근 개정된 시설물 안전진단에 관한 특별법에 제시된 점검주기와 독일의 점검주기를 비교하고, 외국의 손상 보고서에 나타난 손상발견시기를 분석하였으며, 분석 결과를 기초로 국내 진단 주기의 재조정을 제안하였다. 이를 위해 비교 대상인 양국의 교량 현황을 살펴보고, 유지관리 체계와 비용을 객관적 비교근거로 제시하였다.

• International Journal of Reliability and Applications
• /
• 제15권1호
• /
• pp.51-64
• /
• 2014

This paper develops a warranty cost model for complex systems with imperfect repair within a warranty period by addressing a practical case that the first inter-failure interval is longer than any other inter-failure intervals. The product is in its best condition before the first failure if repair is imperfect. After the imperfect repair, other inter-failure intervals which are explained by renewal processes, are stochastically smaller than the first inter-failure interval. Based on this idea, we suggest the failure-interval-failure-criterion model. In this model, we consider two random variables, X and Y where X represents failure intervals and Y represents failure criterion. We also obtain the distribution of the number of failures and conduct the warranty cost analysis. We investigate different types of warranty cost models, reliabilities and other measures for various systems including series-parallel configurations. Several numerical examples are discussed to demonstrate the applicability of the methodologies derived in the paper.

• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.879-885
• /
• 2013

By performing interval analysis on the system transfer function, we propose an improved method of control loop design for a DC/DC converter. In conventional design methods, the effect of system parameter change due to the specified range of operating conditions and production tolerances in power components should be checked a posteriori, because this may result in a transfer function shift and performance degradation. In the proposed method, a possible parameter change is considered a priori in the design step in order that the desired crossover frequency and sufficient phase margin can be achieved even in the worst case condition. As an illustrative example, a buck dc/dc converter is designed by two different methods and performance comparisons are performed to verify the feasibility of the proposed scheme.

• ETRI Journal
• /
• 제41권5호
• /
• pp.658-669
• /
• 2019

For dual-channel time-frequency (TF) overlapped signals with low sparsity in underdetermined blind source separation (UBSS), this paper proposes an effective method based on interval probability to estimate and expand the types of mixing matrices. First, the detection of TF single-source points (TF-SSP) is used to improve the TF sparsity of each source. For more distinguishability, as the ratios of the coefficients from different columns of the mixing matrix are close, a local peak-detection mechanism based on interval probability (LPIP) is proposed. LPIP utilizes uniform subintervals to optimize and classify the TF coefficient ratios of the detected TF-SSP effectively in the case of a high level of TF overlap among sources and reduces the TF interference points and redundant signal features greatly to enhance the estimation accuracy. The simulation results show that under both noiseless and noisy cases, the proposed method performs better than the selected mainstream traditional methods, has good robustness, and has low algorithm complexity.