• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.331-337
• /
• 2013

An experimental study on the performance of a liquid electric component cooling system was performed. The thermal resistance and pressure drop at a heat sink were measured, for aluminum waterblocks with four different internal shapes, with either smooth surface, porous media filling, or with fins of 5 mm height, or of 7 mm height. The fins had 0.5 mm thickness, and the gap between the fins was 0.5 mm. The waterblock internal dimension was $36.5{\times}36.5{\times}7mm$. Compared with the waterblock with smooth surface, the thermal resistance reduction was 11%, 46%, and 42% for waterblocks with porous media filling, 5 mm, and 7 mm fins, respectively. A new dimensionless parameter was suggested to evaluate the waterblock performance, with the simultaneous consideration of thermal resistance and pressure drop. The performance of the waterblock with fins of 5 mm height was best by parameter.

• Molecules and Cells
• /
• v.44 no.5
• /
• pp.363-373
• /
• 2021

Immune checkpoint inhibitors have changed the paradigm of treatment options for non-small cell lung cancer (NSCLC). Monoclonal antibodies targeting programmed death-1 (PD-1) and programmed death ligand-1 (PD-L1) have gained wide attention for their application, which has been shown to result in prolonged survival. Nevertheless, only a limited subset of patients show partial or complete response to PD-1 therapy, and patients who show a response eventually develop resistance to immunotherapy. This article aims to provide an overview of the mechanisms of acquired resistance to anti-PD-1/PD-L1 therapy from the perspective of tumor cells and the surrounding microenvironment. In addition, we address the potential therapeutic targets and ongoing clinical trials, focusing mainly on NSCLC.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1129-1135
• /
• 2020

The effects of battery aging limit the rechargeable capacity, State of Health(SoH). It is very important to estimate the SoH in the battery monitoring system(BMS) and many algorithms of measuring the internal resistance of the battery were proposed. A method is used by applying a current source of a specific frequency to the battery and measuring the voltage response. When charging harmonic noise is generated in the voltage response, it results in poor resistance measurement accuracy. In this paper, a robust battery internal resistance measurement algorithm is proposed to eliminate the effect of charging noise by integrating the current source and voltage response signals for a certain period. It showed excellent accuracy and stable measurement results. Applying to the BMS for uninterruptible power supply, the usefulness of the proposed method is verified.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.2
• /
• pp.184-194
• /
• 1999

Backgrounds : The advent of penicillin has led to the marked reduction in the mortality from pneumococcal bacteremia, however, the mortality is still relatively high in this post-antibiotic era. Actually the prevalence of infection due to penicillin-resistant penumococci is increasing worldwide, and it is especially high in Korea due to irrelevant use of antibiotics. So, the high mortality of pneumococcal sepsis might be related to the emergence of penicillin-resistant strains, however, many other antibiotics, which eradicate pneumococci effectively, are available in these days. This has led us to suspect the role of penicillin-resistance in the high mortality rate. In this study, we evaluated the effect of penicillin resistance on the mortality of patients with penumococcal bacte remia. Methods: The study population consisted of 50 adult patients with penumococcal bacteremia who were admitted between Jan, 1990 and July, 1997. Medical records were analyzed retrospectively. Results: Most of the patients (96%) had underlying diseases. The most common local disease associated with pneumococcal bacteremia was pneumonia (42%), which was followed by spontaneous bacterial peritonitis (14%), cholangitis (10%), meningitis (8%), liver abscess (4%), pharyngotonsillitis (4%), sinusitis (2%) and cellulitis (2%). While the overall case-fatality rate in this study was 24%, it was higher when peumococcal bacteremia was associated with pneumonia (42%) or meningitis (50%). The rate of penicillin resistance was 40%, which was increased rapidly from 1991. The rate of penicillin resistance was significantly higher in patients with the history of recent antibiotics use and hospitalization within 3 months respectively. The clinical manifestations, that is, age, severity of underlying diseases, nosocomial infection, associated local diseases, and the presence of shock or acute renal failure were not statistically different between the patients with penicillin-resistant and -sensitive pneumococcal bacteremia. The mortality of patients infected with penicillin-resistant pneumococci was not statistically different from those with penicillin-sensitive pneumococcal bacteremia. Conclusion: Penicillin resistance is not associated with high mortality in adult patients with pneumococcal bacteremia. As the overall mortality is high, active penumococcal vaccination is recommended in patients with high risk of infection.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.3
• /
• pp.295-303
• /
• 2003

Backgroung : The incidence of penicillin-resistant streptococcus pneumoniae(PRSP) accounts for almost 70% of all pneumococcal pneumonia cases in Korea. It is still unclear as to whether the efficacy of penicillin or equally active beta-lactam agents is compromised in PRSP pneumonia. This study investigated the prevalence of PRSP in community-acquired pneumonia and its clinical course. Methods : A total of 42 patients with community-acquired pneumococcal pneumonia were evaluated from July 1999 to May 2001. The cultured strains of Streptococcus pneumoniae were divided into susceptible, intermediately resistant, and resistant strains by an E-test, and the effect of the clinical course was investigated. Results : From a total of 42 patients, 22 (52.4%) patients had an intermediate resistance (MIC $0.1-1{\mu}g/m{\ell}$) and six (14.3%) showed a high resistance ($MIC{\geq}2.0{\mu}g/m{\ell}$) with current penicillin susceptibility categories. However, according to the classification of the DRSPTWG (Drug Resistant Streptococcus pneumoniae Therapeutic Working Group), there were 11 cases (26.2%) of intermediate resistance and no case of high resistance. Under empirical antimicrobial treatment, there was no difference in the clinical outcome between the penicillin susceptible and resistant group. Conclusion : The clinical outcome of PRSP pneumonia with empirical therapy was acceptable. These results suggest that the current MIC breakpoint for penicillin resistance in Streptococcus pneumoniae has been set at a very low level and penicillin resistance according to the NCCLS classification does not significantly influence the outcome of the empirical treatment for pneumococcal pneumonia.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.303-307
• /
• 2015

The effects of additive such as $H_2O_2$ in KOH electrolyte solution for the Aluminum/Air fuel cell were investigated with regard to electric power characteristics. The power generated by a Al/Air fuel cell was controlled by the KOH electrolyte solution and $H_2O_2$ depolarizer. Higher cell power was achieved when higher KOH electrolyte concentration and higher $H_2O_2$ depolarizer amount. The maximum power was increased by the increase amount $H_2O_2$ depolarizer, it was found that $H_2O_2$ depolarizer inhibits the generation of hydrogen and the polarization effect was reduced as a result. Internal resistance analysis was employed to elucidate the maximum power variation. Higher internal resistance created internal potential differences that drive current dissipating energy. In order to improve the output characteristics of the Al/Air fuel cell, it is thought to be desirable to increase the KOH electrolyte concentration and increase the $H_2O_2$ addition amounts.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.910-914
• /
• 2007

Recently, a study on the energy conversion efficiency and up sizing' technology of dye-sensitized solar cell (DSC) which is focused in considering a new alternative solar cell has been executed. But consideration for the cell characteristics about an internal electronic flow on a large-scaled DSC has not been carried out yet. In this study, we have chosen a solar cell width as a variable of a large-scaled DSCs and confirmed electric characteristics of an individual cell. First, Pt counter electrode surface of DSC is deposited by RF sputtering methode and the electrochemical properties of Pt electrodes was investigated by cyclic -voltammetry. With the Pt electrode, we fabricated DSC samples of different width. As a result, the higher the internal resistance of DSC becomes, the wider the width gets. Internal resistance makes it difficult to collect photoelectron generated from dye. Ultimately up sizing DSC causes the increase of internal resistance and then has a bad effect on the cell characteristics.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.912-917
• /
• 2003

In this paper a new truss modeling technique for describing the beam shear resistance mechanism is proposed based on the reinterpretation of the well-known relationship between shear and the rate of change of bending moment in a reinforced concrete beam subjected to combined shear and moment loads. The core of the model is that a new perspective on the shear resistance can be gained by viewing the internal stress filed in terms of the superposition of two base components of shear resistance; arch action and beam action. The arch action can be described as a simple tied-arch which is consisted of a curved compression chord and a tension tie of the longitudinal steel, while the beam action between the two chords can be modeled as a membrane shearing element with forming a smeared truss action. The compatibility of deformation associated to the two action is taken into account by employing an experimental factor or internal state force factor a. Then the base equation of V=dM/dx is numerically duplicated. The new model was examined by the 362 experimental results. The shear strength predicted by the internal force state factor a show better correlation with the tested values than the present shear design.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.538-539
• /
• 2006

The influence of the internal current for the ZnO ceramics on the sintering behavior by pulse current sintering (PCS) method was investigated. To clear the dependence of inner current on the sintering behavior of ZnO ceramics, direct measurement of electric resistance of ZnO specimen under sintering by SPS device was carried out. It was observed that electric resistance of specimen decreases with increase in the temperature. The electric resistance begins to decrease from the low temperature of $200^{\circ}C$. The internal structure of sintered ZnO ceramics changed by the control of the internal current in the specimen using $Al_2O_3$ plate.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.5
• /
• pp.365-371
• /
• 2019

This study shows the feasibility of the parameter of the 1st RC parallel equivalent circuit as a factor of the heat generation of lithium-ion cell. The internal resistance of a lithium-ion cell consists of ohmic and polarization resistances. The internal resistances at various SOCs of the lithium-ion cell are obtained via an electrical characteristic test. The internal resistance is inversely obtained through the amount of heat generated during the experiment. By comparing the resistances obtained using the two methods, the summation of ohmic and polarization resistances is identified as the heating factor of lithium-ion battery. Finally, the amounts of heat generated from the 2C, 3C, and 4C-rate discharge experiments and the COMSOL multiphysics simulation using the summation of ohmic and polarization resistances as the heating parameter are compared. The comparison shows the feasibility of the electrical parameters of the 1st RC parallel equivalent circuit as the heating factor.