Influence of the Internal Current on the Sintering Behavior of ZnO Ceramics Sintered by PCS Method

  • Misawa, Tatsuya (Department of Electrical and Electronic Engineering, Faculty of Science and Engineering, Saga University) ;
  • Shikatani, Noboru (Department of Electrical and Electronic Engineering, Faculty of Science and Engineering, Saga University) ;
  • Kawakami, Yuji (Department of Material and Environment, Industrial Technology Center of Saga) ;
  • Enjoji, Takashi (Department of Material and Environment, Industrial Technology Center of Saga) ;
  • Ohtsu, Yasunori (Department of Electrical and Electronic Engineering, Faculty of Science and Engineering, Saga University) ;
  • Fujita, Hiroharu (Department of Electrical and Electronic Engineering, Faculty of Science and Engineering, Saga University)
  • Published : 2006.09.24

Abstract

The influence of the internal current for the ZnO ceramics on the sintering behavior by pulse current sintering (PCS) method was investigated. To clear the dependence of inner current on the sintering behavior of ZnO ceramics, direct measurement of electric resistance of ZnO specimen under sintering by SPS device was carried out. It was observed that electric resistance of specimen decreases with increase in the temperature. The electric resistance begins to decrease from the low temperature of $200^{\circ}C$. The internal structure of sintered ZnO ceramics changed by the control of the internal current in the specimen using $Al_2O_3$ plate.

Keywords