• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.72-80
• /
• 2001

In this paper, we present a systematic method of extracting the input parameters of poly-Si TFT(Thin-Film Transistor) for Spice simulations. This method has been applied to two different types of poly-Si TFTs such as ELA (Excimer Laser Annealing) and SMC (Silicide Mediated Crystallization) with good fitting results to experimental data. Among the Spice circuit simulators, the PSpice has the GUI(graphic user interface) feature making the composition of complicated circuits easier. We added successfully the poly-Si TFT model of AIM-Spice to the PSpice simulator, and analyzed easily to compare the electrical characteristics of pixels without or with the line RC delay. In the comparative results, the ELA poly-Si TFT is superior to the SMC poly-Si TFT in the charging time and the kickback voltage for the TFT-LCD (Thin Film Transistor-Liquid Crystal Display).

• International Journal of Ocean System Engineering
• /
• v.1 no.1
• /
• pp.52-59
• /
• 2011

A prototype radar display unit was implemented using inexpensive off-the-shelf components, including a nonlinear estimation algorithm for the target tracking in a clutter environment. Two custom designed boards; an analog signal processing board and a DSP board, can be plugged into an expansion slot of a personal computer (PC) to form a maritime radar display unit. Our system provided all the functionality specified in the International Maritime Organization (IMO) resolution A422(XI). The analog signal processing board was used for A/D conversion as well as rain and sea clutter suppression. The main functions of the DSP board were scan conversion and video overlay operations. A host PC was used to run the tracking algorithm of targets in clutter, using the discrete-time Bayes optimal (nonlinear, and non-Gaussian) estimation method, and the graphic user interface (GUI) software for Automatic Radar Plotting Aid (ARPA). The proposed tracking method recursively found the entire probability density function of the target position and velocity by converting into linear convolution operations.

• Steel and Composite Structures
• /
• v.44 no.5
• /
• pp.691-705
• /
• 2022

Shear failure in reinforced concrete (RC) structures is very hazardous. This failure is rarely predicted and may occur without any prior signs. Accurate shear strength prediction of the RC members is challenging, and traditional methods have difficulty solving it. This study develops a JAYA-GBRT model based on the JAYA algorithm and the gradient boosting regression tree (GBRT) to predict the shear strength of RC slender beams without stirrups. Firstly, 484 tests are carefully collected and divided into training and test sets. Then, the hyperparameters of the GBRT model are determined using the JAYA algorithm and 10-fold cross-validation. The performance of the JAYA-GBRT model is compared with five well-known empirical models. The comparative results show that the JAYA-GBRT model (R² = 0.982, RMSE = 9.466 kN, MAE = 6.299 kN, µ = 1.018, and Cov = 0.116) outperforms the other models. Moreover, the predictions of the JAYA-GBRT model are globally and locally explained using the Shapley Additive exPlanation (SHAP) method. The effective depth is determined as the most crucial parameter influencing the shear strength through the SHAP method. Finally, a Graphic User Interface (GUI) tool and a web application (WA) are developed to apply the JAYA-GBRT model for rapidly predicting the shear strength of RC slender beams without stirrups.

• Science of Emotion and Sensibility
• /
• v.12 no.4
• /
• pp.511-518
• /
• 2009

With the help of the advancements in information and communication, information appliances are changing. Flat panels made it possible for information appliances to become smaller in size and lighter in weight, and high end graphics provide increase in realistic and immersive use. Even with these advancements interest in design for laboratory equipment tend to only stay on a level of the exterior of the equipment, not to the point of designing the interface of display GUI. Inspired with the problem above this research would contain the preference analysis ondisplay GUI design considering the characteristics of the main users and the laboratory equipment itself. The test would be held through comparison of graphic-based display GUI and text-based display GUI and analyzing the task time and number of errors made, looking for which display GUI scientist prefer. The test results show that text-based GUI has a higher efficiency but the actual users preferred the graphic-based display GUI.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.401-410
• /
• 2015

Objective: The present study was to improve the graphic user interface (GUI) of a military computer-based training (CBT) system in terms of usability. Background: Existing studies have focused on usability evaluation of a particular GUI type such as sequence, hierarchy, or context type; however, few research has been conducted which identifies preferred GUI features based on a comparative analysis of different GUI types. Method: A comparative evaluation was conducted by 9 CBT design experts using a 7-point scale (1: very low, 4: neutral, and 7: very high) on hierarchy and context GUI types of a military CBT system in terms of 10 usability criteria. Then, preferred features of the hierarchy and context types being accommodated, a new GUI was developed and validated by 22 CBT users. Results: While the hierarchy type was found preferred by 1.6 times in terms of controllability to the context type, the opposite was found in terms of attractiveness, simplicity, and responsiveness by 0.6, 0.8, and 0.8 times, respectively. The proposed GUI was found superior to the hierarchy and context types in terms of accessibility and informativeness by more than 1.5 times, but inferior to the hierarchy and context type in terms of simplicity by 0.6 and 0.9 times, respectively. Conclusion: The new GUI developed by accommodating the preferred features of the hierarchy and context types improves usability in terms of accessibility and informativeness except simplicity. Application: The comparative analysis of various GUIs can be applied to develop an improved GUI in a systematic manner based on preferred features of the existing GUIs.

• Progress in Medical Physics
• /
• v.3 no.1
• /
• pp.71-78
• /
• 1992

This study describes the design of the biophysiological signal processing analyzer which can collect and analyze the biosignal raw data. System hardware is consisted of the IBM PC AT. pre-amplifier. AID converter, Counter/Timer. and RS-232C processor. Biophysiological signal data were processed by the software digital filter. FFT and graphic processing routine. The tachogram and FFT of the the peak to peak interval time was accomplished by the Graphic user interface software using the biophysiological signal processed data. Using this system. the powerspectrum of the heart rate variability during the long term could be observed. Experimental results of this system approach our purpose. which is improved the cost performance. easy to use. reducing raw-data noise and optimizing model for digital filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.103-103
• /
• 2000

In this paper to cope with the reduction of products life-cycle as the variety of products along with the various demands of consumers, a virtual simulator is developed to make the changeover of manufacturing line efficient to embody a virtual simulation similar to a real manufacturing line. The developed virtual simulator can design a layout of a factory and make the time scheduling. Every factory has one simulator so that one product can be manufactured in the factories to use them as virtual factories. We suggest a scheme that heightens the agility to the diversity of manufacturing models by making the information of manufacturing lines and products models to be shared. The developed unit simulator can construct a proper virtual manufacturing line along with the required process of products using several kinds of operator and work cell. A user with the simulator can utilize an interface that makes one to manage the separate task process for each manu(acturing module, change operator components and work cells, and easily teach tasks of each task module. The developed simulator was made for users convenience by Microsoft Visual C++ 6.0 that can develop a program supplying graphic user interface environment and by OpenGL of the Silicon Graphics as a graphic library to embody 3D graphic environment. Also, we show that the simulator can be used efficiently for the agile manufacturing by the communication among the factories being linked by TCP/IP and a hybrid database system made by a hierarchical model and a relational model being developed to standardize the data information.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.461-466
• /
• 2011

In genetic and molecular breeding studies of plants, researchers need to design various kinds of primers based on their research purposes. So far many kinds of web- or script-based non-commercial programs for primer design are available. Because most of them do not include user interface for multipurpose usage including gene structure prediction and direct target selection on sequences, it has been a laborious work to design primers targeting on the exon or intron regions of interesting genes. Here we report a primer designing graphic user interface program, Pickprimer, that includes gene structure prediction and primer design modules by combining source codes of the Spidey and Primer3 programs. This program provides simple graphic user interface to input sequences and design primers. Genomic sequence and mRNA or coding sequence of genes can be copy and pasted or input as fasta or text files. Based on alignment of the input sequences using the Spidey module, a putative gene structure is graphically visualized along with exon-intron sequences of color codes. Primer design can be easily performed by dragging mouse on the displayed sequences or input primer targeting position with desirable values of primers. The output of designed primers with detailed information is provided by the Primer3 module. PCR evaluation of 24 selected primer sets successfully amplified single amplicons from six Brassica rapa cultivars. The Pickprimer will be a convenient tool for genetic and molecular breeding studies of plants.

• Archives of design research
• /
• v.13 no.4
• /
• pp.105-114
• /
• 2000

Since the apple company adopted the desktop-office metaphor in Macintosh, the metaphoric interface has been used generally in multimedia products or services, on which user-friendly knowledge, conception, and images are represented metaphorically. Although the metaphor can be employed as one of ways to identify the essence or pattern of information, a theoretical framework on its relation with the user interface is not fully established. In this study, the user interface considered as a core of multimedia design was discussed, and the form of the graphic metaphor was investigated. The seven forms of the graphical metaphor presented herein would be applied as one of approaches to the user interface in relevant researches.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.681-686
• /
• 2003

It has been designed GUI(graphic user interface) to consult the convenience of a input data and the flexibility that can be retrieved dismantling information relation to decommissioning DB of KRR1&2. The GUI can proceed an input materials and a search and output of a saved data in server based on a facility code and also have a function of explorer which can find the lower dismantling objects in each facilities. It has added the structure of the multimedia that could be showed a series of dismantling activities with a Mpeg and pictures into the GUI. In the future work, Decommissioning DB and User Interface are intend to contribute a functions that could be evaluate and analyze for a dismantling activities with a engineering theory.