• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.133-143
• /
• 2023

This paper describes the system integration laboratory's requirement analysis, implementation, and verification for multiple-scenario unmanned aerial vehicle operation and control technology using a manned rotorcraft for Manned-Unmanned Teaming. System integration laboratory consists of manned rotorcraft flight simulation, unmanned aerial vehicle flight and mission equipment simulation, ground control system simulation for unmanned aerial vehicle control and change in the control authority between the ground control system and manned rotorcraft, and operation and control system for mission plan's writing and transmission. Each implemented simulation verified the requirements through software and hardware integration test.

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.243-255
• /
• 2003

The mathematical models for GIS-based spatial data integration have been developed for geological applications such as mineral potential mapping or landslide susceptibility analysis. Among various models, the effectiveness of fuzzy logic based integration of multiple sets of geological data is investigated and discussed. Unlike a traditional target-driven fuzzy integration approach, we propose a data-driven approach that is derived from statistical relationships between the integration target and related spatial geological data. The proposed approach consists of four analytical steps; data representation, fuzzy combination, defuzzification and validation. For data representation, the fuzzy membership functions based on the likelihood ratio functions are proposed. To integrate them, the fuzzy inference network is designed that can combine a variety of different fuzzy operators. Defuzzification is carried out to effectively visualize the relative possibility levels from the integrated results. Finally, a validation approach based on the spatial partitioning of integration targets is proposed to quantitatively compare various fuzzy integration maps and obtain a meaningful interpretation with respect to future events. The effectiveness and some suggestions of the schemes proposed here are illustrated by describing a case study for landslide susceptibility analysis. The case study demonstrates that the proposed schemes can effectively identify areas that are susceptible to landslides and ${\gamma}$ operator shows the better prediction power than the results using max and min operators from the validation procedure.

• 재활복지
• /
• v.16 no.3
• /
• pp.165-192
• /
• 2012

This study aims to develop a valid self-report scale for the community integration of persons with psychiatric disabilities. To this end, conducted were in-depth interviews with individuals with psychiatric disabilities, consultation with experts, and a survey. First, literature review and the in-depth interview with individuals with psychiatric disabilities were collected questionnaires regarding the community integration of persons with psychiatric disabilities. Second, preliminary research 1 focused on the selection and modification of the items collected in the first research. Final 44 items were selected by the verification of the importance and content-validity of items under the advices of professionals. Lastly, preliminaty research 2 applied cross-validation method to the data from 524 cases in order to verify the factor structure and concept-validity of the items. The result of exploratory factor analysis shows that 5 factor structures are the most appropriate, and the confirmatory factor analysis suggests that the Self-reporting Scale of Community Integration for the person with psychiatric disabilities consists of 27 questionnaires which compose 5sub-concepts such as'psychological integration','physical integration', 'social support', 'social integration', 'independence/self-actualization'. Moreover, this scale was significantly related to the 'Life Satisfaction scale for the person with psychiatric disabilities'. This proved concurrent validity of the scale.

• Korean Journal of Social Welfare
• /
• v.62 no.2
• /
• pp.187-208
• /
• 2010

This Article attempts to analyse the enlarger phenomenon of 'temporary work-integration social enterprise' in 80's and 90's years in Germany. For this analysis were considered concepts and development of the 'secondary labour market' with respect of the 'temporary work-integration social enterprise'. At the same time were observed the background of the settlement of the 'secondary labour market' as local infrastructure for job creation in 80's and 90's years. Next was analyzed the contribution of the 'temporary work-integration social enterprise' on the fiscal consolidation through the method of cost-benefit analysis in fall of the community Gie${\ss}$en. Finally was limits and potential of the 'temporary work-integration social enterprise' analyzed, which as strategy for the fiscal consolidation was expanded in 80's and 90's years.

• The Journal of the Korea Contents Association
• /
• v.14 no.6
• /
• pp.44-53
• /
• 2014

This study seeks to analyze vertical integration structure of Korean popular music market focused on corporation concentration and production system by applying production of culture perspective of Peterson, Subject of analysis is Melon weekly music chart(2000-2013), which is No.1 digital music distributor. The result showed vertical integration structure of Korean popular music industry was different from America. Vertical integration of American major was based on open system to be responsible for promotion and distribution by M&A of independent label but entrusted them-with total production to cope-with uncertainty of music market. On the other hand, Korean system was in charge of pure distribution only as digital service provider and it showed modified vertical structure because traditional value chain was destroyed by changing digital music environment. Especially found seriousness of oligopoly by distribution company of conglomerate affiliation. and this is harm against building healthy industry ecosystem in creative economy era and it needs improvement through study of advanced case, open system.

• Journal of Environmental Impact Assessment
• /
• v.21 no.6
• /
• pp.903-916
• /
• 2012

We need to use aesthetic landscape assessment(ALA) as the means of riparian buffer zone(RBZ) management. This study verified the political validity of designation policy of RBZ and land purchase policy. The purpose of this study was to propose RBZ landscape management strategies through ALA of RBZ in Gyeongan Stream for the better attractive and healthy riparian landscapes. The natural type landscape units(LUs) covered 40.9% of the entire area and the cultivated land type LUs covered 20.58%. Landscape assessment consisted of landscape quality and landscape integration assessment. The criteria for assessing landscape quality(LQ) were naturalness, interest, uniqueness, and landscape function. LQ was ranked into five grades using a matrix. The landscape integration assessment consisted of an inner integration assessment in each LU and outer integration assessment among LUs. To review the propriety of designating the riparian area and the riparian ecological belt, differences in ecological appraisal and aesthetic valuation were reviewed through a t-test, Oneway ANOVA, and logistic analysis. The results of ALA, 29.15% of the entire area scored at grade 1 in LQ, while 31.95% scored at grade 5, indicating that grade 5 areas occupied a high share. Surveyed areas were divided into designated RBZ and undesignated RBZ. Results indicated that designated RBZ scored grade 1 in LQ took up 33.2% of the total, significantly higher than the 23.3% taken up by undesignated RBZ. When examined according to buffer distance, grade 1 areas within 50m took up 50.2% of the total area, lower than the 32.7% at buffer distances of 500m-1km. Results indicated a 1% statistically significant difference. Accordingly, analysis was undertaken for the expansion of designation of the riparian area and the selection of appropriate land for formation of a riparian ecological belt, and was designated at priority 1 and 2 for land purchase. This study can also contribute to the formation of a riverine eco-belt through discovery of design factors for upgrading the ecology, aesthetics, and landscape of the riparian area and application in determining land purchase priorities.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2427-2444
• /
• 2021

The lack of plant-side energy storage analysis to support nuclear power plants (NPP), has setup this research endeavor to understand the characteristics and role of specific storage technologies and the integration to an NPP. The paper provides a qualitative review of a wide range of configurations for integrating the energy storage system (ESS) to an operating NPP with pressurized water reactor (PWR). The role of ESS technologies most suitable for large-scale storage are evaluated, including thermal energy storage, compressed gas energy storage, and liquid air energy storage. The methods of integration to the NPP steam cycle are introduced and categorized as electrical, mechanical, and thermal, with a review on developments in the integration of ESS with an operating PWR. By adopting simplified off-design modeling for the steam turbines and heat exchangers, the results show the performance of the PWR steam cycle changes with respect to steam bypass rate for thermal and mechanical storage integration options. Analysis of the integrated system characteristics of proposed concepts for three different ESS suggests that certain storage technologies could support steady operation of an NPP. After having reviewed what have been accomplished through the years, the research team presents a list of possible future works.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.84-89
• /
• 2018

Due to the development of domestic technology, a variety of aircraft launch weapons have been developed, and the importance of aircraft-store integration certification is increasing. The aircraft-Store integration certification is to certify compliance with the armaments/stores integration criteria set out in the Standard ACC and to prove that there is no problem with the safety flight. Therefore, it is necessary to reflect the requirements of the aircraft in the store development process to reduce the design change requirement in the compatibility verification stage. In this paper, the relationship between the Standards ACC, aircraft-store compatibility reference document MIL-HDBK-1763, and the development process of cruise guided weapons have been analyzed. As a result of the analysis, it was concluded that the design changes in the aircraft-store integration certification stage could be reduced if the aerodynamic and structural design requirements were reflected from the conceptual design stage.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.139-148
• /
• 2021

The study examines public attitude and reaction regarding administrative integration in Daegu and Gyeongbuk area. Specifically, it employs social big data including textual comments on online news articles and YouTube video clips. The collected data are analyzed in order to compare two periods, that is, before and after the inauguration of the Public Opinion Committee for One Daegu-Gyeongbuk. As a result, we have found that people's favorable response to administrative integration has gradually increased since the launch of the Committee. However, it still lacks specific administrative procedures and discussion topics among the frequently used words in the collected data. Thus, the Committee needs to provide a variety of information and materials related to administrative integration.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.782-787
• /
• 2023

Korea augmentation satellite system (KASS) integration, verification, qualification (IVQ) activity is verification of requirements for KASS system and its sub-system that were performed based on the inspection, analysis, review of design, test (IART) method from factory acceptance test (FAT) to test readiness review (TRR) after critical design review (CDR) was closed. In the FAT phase, developed equipment was installed on the test platform and we were verified interfaces between sub-systems and coupling test with the kass control station (KCS). In the site aceeptance test (SAT) phase, on-site verification was conducted by installing equipment verified by FAT such as kass reference station (KRS), kass processing station (KPS), kass uplink station (KUS), KCS. However, considering the developed plan and status, SAT was divided into 3 phases and coupling test was performed. In the TRR phase, the KASS system verification was performed through FAT's test list and additional test list using the satellite based augmentation system (SBAS) broadcast signal from geostationary earth orbit (GEO) 1.