• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.107-110
• /
• 2011

커튼월의 단열성이 가장 취약한 패스닝 유닛 부분의 단열성을 향상시키기 위한 연구이다. 멀리온과 연결부위가 최소화 되도록 고안하여 제작하였고, 중간에 방진고무 및 실리콘으로 단열층을 형성하여 그 성능을 평가하였다. 무단열에 비해 방진고무 단열은 2.6℃~4.0℃의 온도차를 보였으며, 실리콘 단열은 2.4℃의 온도차를 보였다. 따라서 패스닝 유닛에는 단열층이 필요하다고 판단된다.

• Elastomers and Composites
• /
• 제45권3호
• /
• pp.212-216
• /
• 2010

리튬 이온 전지의 가스켓 재료로 사용되기 위해서는 내전해액성, 전기절연성, 낮은 압축 영구 줄음률, 비오염성, 내열성이 요구된다. Perfluoroalkoxy (PFA)보다 압축 영구 줄음률이 우수한 고무의 적합성을 평가하기 위하여 Ethylene Propylene Diene Monomer (EPDM), Nitrile Butadiene(NBR), Fluoro Elastomers(FKM), Methyl-Vinyl Silicone Rubber (VMQ), Fluorosilicone(FVMQ)을 이용하여 최적상태의 compound를 제작하고 특성을 살펴보았다. 시험편을 $80^{\circ}C$의 propylene carbonate액에 침적하여 경도 및 체적변화를 1,000시간까지 시간별로 측정하였다. EPDM과 VMQ가 내전해액성이 우수하였으며, 전기절연성에서도 체적저항 기준 $10^{10}{\Omega}cm$이상의 결과를 얻을 수 있었다. 따라서, EPDM과 VMQ가 적절한 것으로 판단되었다.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.431-437
• /
• 2019

본 연구는 유기계 기재에 무기계 바인더 소재를 함침시킴으로써 유기계 수준의 경제성을 가지며 우수한 단열성능 및 화재 안전성을 보유한 유무기 융합형 단열재 개발을 목적으로 한다. 유기계 기재는 폴리우레탄 소재의 상용 스펀지를 사용하였고, 함침용 무기 바인더 용액은 재활용 석고 부산물에 물과 첨가제를 혼합하여 제조하였다. 개발 소재의 성능평가 결과 열전도율 0.051W/mK 이하의 우수한 단열성능 뿐만 아니라 국토교통부 고시 제 2015-744호 기준에 명시된 준불연 재료임을 확인할 수 있었다. 또한 본 개발 소재는 제조 공정 과정에서 밀도 제어에 따른 열전도율 및 난연성 조절이 가능하여 다양한 용도의 단열재에 적용 가능할 것으로 판단된다.

• 한국지열·수열에너지학회논문집
• /
• 제20권2호
• /
• pp.1-10
• /
• 2024

The introduction of the sector coupling concept has expanded the scope of ESS utilization, resulting in the importance of thermal management of ESS. To ensure the safe use of the lithium-ion batteries that are used in ESS, it is important to use the batteries at the optimal temperature. To examine the utilization of liquid cooling in ESS, numerical study was conducted on the thermal characteristics of 21700 battery modules (16S2P array) during liquid cooling using Novec-649 as insulating fluid. The NTGK model, an MSMD model in ANSYS fluent, was used to investigate thermal characteristics on the battery modules with liquid immersion cooling. The results show that the final temperature of the battery module discharged at 5 C-rate is 68.9℃ using natural convection and 48.3℃ using liquid cooling. However, the temperature difference among cells in the battery module was up to 0.5℃ when using natural convection cooling and 5.8℃ when using liquid cooling, respectively, indicating that the temperature difference among cells was significantly increased when liquid cooling was used. As the mass flow rate increased from 0.01 kg/s to 0.05 kg/s, the average temperature of the battery module decreased from 48.3℃ to 38.4℃, confirming that increasing the mass flow rate of the insulating fluid improves the performance of liquid immersion cooling. Although partial liquid immersion cooling has a high cooling performance compared to natural convection cooling, the temperature difference between modules was up to 8.9℃, indicating that the thermal stress of the battery cells increased.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.63.1-63.1
• /
• 2015

The next generation electronics need to not only be smaller but also be more flexible. To meet such demands, van der Waals (vdW) heterostructures using two dimensional (2D) atomic crystals such as graphene, hexagonal boron nitride (h-BN) and transition metal dichalcogenides (TMDCs) have been attracted intensely. In particular, for high performance of vdW heterostructures device, ultraclean interface between stacked 2D atomic crystals should be guaranteed. In this talk, I will present fabrication and characterization of the vdW field effect transistors toward performance enhancement by employing TMDCs channel, h-BN insulating layer and graphene electrode. Furthermore, it will also be introduced the characterization and surface engineering of graphene for gas molecule sensor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.597-600
• /
• 2001

In this paper, we evaluated the effect of accumulated charges on hydrophobicity of room temperature vulcanized(RTV) silicone rubber, which could improve the contamination performance of porcelain insulators, with uv radiation time. Outdoor insulating material could be charged by the corona discharge on field intensified area of insulator and discharge between the water drops. In addition, we performed the accelerated uv radiation on samples and investigated the change of charging decay with time. In this results, it is found that silica-like structure on the surface of RTV silicone rubber was formed by uv treatments and this layer have the characteristic of retaining the charges on surface for a long time. These charges have effects on its hydrophobicity and so adversely effects on contamination performance. Based on our results, we discussed the other degradation mechanism with well known ones.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.62-63
• /
• 2016

In addition to the waterproof sheet waterproof objectives that apply to the building roof it is being constructed, including a complex such as insulation performance, root-resistance. However, thermal insulation of the composite waterproofing sheet is an insulating effect a wide variety depending on the specific construction -specific, material and even the effect is this part of the test to the generation when insignificant compared to each other a number of roof insulation effect of the insulation composite waterproof sheet that is currently in effect analysis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.107-108
• /
• 2016

When the construction in a low temperature, the concrete performance is deteriorated by frost damage at early age. In this study, the form utilizing heating sheet and insulation is measured the performance to prevent frost damage at 10 below zero. It produced five types of the form and to measure the temperature history and compressive strength. At first, form attached heating sheet showed the highest temperature. But the form attached vacuum insulation showed the highest temperature ever since 12hours. In the case of compressive strength, the form attached heating sheet + isopink(polystyrene foam board) showed the highest compressive strength. It was followed by vacuum insulation. As a result, the form utilizing insulation and heating sheet helped to prevent frost damage.

• 산업기술연구
• /
• 제31권A호
• /
• pp.33-38
• /
• 2011

In an express tilting train, side wall insulating the noise from the exterior sound source consists of two parts. One is the layered composite panel including aluminum honeycomb, glass wool and nomex honeycomb. The other is the double glazed window. In this study, sound insulation performance of the two parts is investigated by mass law and experiment. Based on ASTM E2249-02, the intensity sound transmission loss (TL) is measured on the specimens of the two parts. Mass law deviation (MLD) is considered in order to compare the sound insulation performance in respect of weight. Contribution of each part to the sound insulation is analyzed and the sound insulation strategy for the interior noise reduction is investigated.

• 한국지열·수열에너지학회논문집
• /
• 제8권2호
• /
• pp.27-35
• /
• 2012

Five zero energy house models developed in Korea for the purpose of the energy performance were compared and analyzed in the study. The standard passive house model applying common technology and efficient energy performance elements was proposed. Standard passive house 5 models have been developed commonly aiming at 100% energy saving, applying high-performance and high-efficiency exterior thermal insulation, using 3 low-e coated window system, and targeting average 0.65 ACH to enhance privacy. Energy recovery ventilators and dry and cold radiant heating floor has been partially applied. Eco-design techniques such as the awning device, heat insulating door, using natural light have been used. Solar and geothermal systems as the application of renewable energy technologies have been commonly applied. And fuel cells were applied to a partial model. The standard model based on common technical elements and average performance of each element and obtained from five model analysis has been proposed in the study.