• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.227-229
• /
• 2002

본 논문에서는 마이크로스트립 라인 전압제어 가변 대역통과필터를 제안한다. 박막 강유전체의 상대 유전율은 인가 전압에 따라 변하는 특성을 이용하였고, Au/BSTO/MgO/Au 구조로 설계하였다. 커플링 수가 3개인 공진기를 연결하여 공진기 사이의 간격을 잘 조절한 격과, 중심 주파수 16 GHz 에서 1.9 GHz의 튜닝 범위, 800MHz 내의 좁은 대역폭, 3dB 이내의 작은 삽입손실을 갖는 필터를 설계할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.371-375
• /
• 2013

The design of a new compact UWB bandpass filter is proposed, which has cascaded center-tapped microstrip composite right/left-handed transmission-line zeroth-order resonators (CRLH-TL ZORs). In an attempt to reduce the size, instead of the conventional half-wavelength resonators or periodic and multiple CRLH-TL cells, only one cell ZOR geometry is adopted as each resonator in the filter. Additionally, two center-tapped ZORs are coupled to increase the slope of the skirt. Besides, stepped impedance matching parts are placed in the paths to the input and output ports to enhance passband and stopband performances. The proposed filter is shown to have the overall size of $0.69{\lambda}_g{\times}0.70{\lambda}_g$, the insertion loss much less than 1 dB, and an acceptable return loss performance in the predicted and measured results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2308-2310
• /
• 2001

In the adaptive fuzzy sliding mode control, from a set of a fuzzy IF-THEN rules adaptive fuzzy sliding mode control whose parameters are adjusted on-line according to some adaptation laws is constructed for the purpose of controlling the plant to track a desired trajectory. Most of the research works in nonlinear controller design using fuzzy systems consider the affine system with fixed grid-rule structure based on system state availability. The fixed grid-rule structure makes the order of the controller big unnecessarily, hence the on-line fuzzy rule structure and fuzzy observer based adaptive fuzzy sliding mode controller is proposed to solve system state availability problems. Therefore, adaptive laws of fuzzy parameters for state observer and fuzzy rule structure are established implying whole system stability in the sense of Lyapunov.

• Anatomy and Cell Biology
• /
• 제51권4호
• /
• pp.305-308
• /
• 2018

Anatomical variations of the sternocleidomastoid muscle (SCM) have been observed to occupy multiple origins and insertion points and have supernumerary heads, sometimes varying in thickness. During routine dissection, a SCM was observed to have six distinct insertions that interface with the course of the superior nuchal line, ending at the midline, bilaterally. This variation was also seen to receive innervation from the accessory nerve as well as the great auricular nerve. To our knowledge, this variant of supernumerary insertions and nerve innervations has not yet been reported. These variants may pose as problematic during surgical approaches to the upper neck and occiput, and should thus be appreciated by the clinician. Herein we discuss the case report, possible embryological origins, and the clinical significance of the observed variant SCM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.210-211
• /
• 2009

In this study, we propose characteristics improvement methods according to via hole plating method for FBAR Duplexer with US PCS($T_x$:1850MHz~1910MHz, $R_x$:1930MHz~1990MHz) bandwidth which is used for wireless systems. Also, we designed and fabricated 3.8*3.8*1.8mm size microminiature FBAR Duplexer based on this proposal. First of all, in this study, we fabricated pentagon shape resonators by different size to make filter combination, and their quality factor(Q) are 687 with 6.6% of $k_{eff}^2$. Using this resonators, designed 3*2Type $T_x$ filter and 3*4Type $R_x$ filter. The transmission line, which works as phase shifter, is designed with $210{\mu}m$ in width and 18mm in length Stripline type. Inductor, which is used for matching component, is designed with width of $75{\mu}m$, a technically achievable minimum width. And adopted plating method of filling via hole with conductive epoxy for improved grounding and thermal conductivity. Using these configuration with all of the matching component values, we found Duplexer characteristics of -1.57dB ~ -1.73dB in insertion loss, -56dB in attenuation at 1850MHz~1910MHz of $T_x$ band. Also, found -2.71 dB ~ -3.23dB in insertion loss, -58dB in attenuation at 1930MHz~1990MHz of $R_x$ band.

• 한국정보통신학회논문지
• /
• 제6권8호
• /
• pp.1292-1296
• /
• 2002

본 논문에서는 CFB 구조에 기반한 마이크로스트립 라인을 이용하여 커플링 개수가 3개인 가변 대역통과 필터를 제안한다. 바이어스 전압을 증가시키면 강유전체의 실효 유전율($\varepsilon$eff)이 감소하고, 감소된 실효 유전율은 중심 주파수를 높은 값으로 이동시킨다 설계된 필터는 $\varepsilon$eff이 13～10에 걸쳐, 반사 손실이 10 dB 이상, 삽입손실이 3.5 dB 이하, 3-dB 대역폭이 1.18 GHz 이하, 중심 주파수는 25.4 GHz에서 28.8 GHz까지 이동하므로 가변성은 3.4 GHz에 달하는 특성을 보인다. 필터의 크기는 7.0 mm ${\times}$ 5.0 mm ${\times}$ 0.5 mm이다.

• 한국전기전자재료학회논문지
• /
• 제23권5호
• /
• pp.388-396
• /
• 2010

In this study, we propose characteristics improvement methods according to via hole plating method for FBAR Duplexer with bandwidth($T_x4: 1850 MHz ~ 1910 MHz, $R_x$:1930 MHz ~ 1990 MHz) which is used for wireless systems. Also, we designed and fabricated $3.8{\times}3.8{\times}1.8mm$ size microminiature FBAR Duplexer based on this proposal. First of all, in this study, we fabricated pentagon shape resonators by different size to make filter combination, and their quality factor(Q) are 687 with 6.6% of ${k_{eff}}^2$. Using this resonators, we designed $3{\times}2$ Type $T_x$ filter and $3{\times}4$ Type $R_x$ filter. The transmission line, which works as phase shifter, is designed with 210 ${\mu}m$ in width and 18 mm in length Stripline type. Inductor, which is used for matching component, is designed with width of 75 ${\mu}m$, a technically achievable minimum width. And adopted plating method of filling via hole with conductive epoxy for improved grounding and thermal conductivity. Using these configuration with all of the matching component values, we found Duplexer characteristics of -1.57 dB ~ -1.73 dB in insertion loss, -56 dB in attenuation at 1850 MHz ~ 1910 MHz of $T_x$ band. Also, found -2.71 dB ~ -3.23 dB in insertion loss, -58 dB in attenuation at 1930 MHz ~ 1990 MHz of $R_x$ band.

• Tuberculosis and Respiratory Diseases
• /
• 제81권2호
• /
• pp.106-115
• /
• 2018

Chest tube insertion is a common procedure usually done for the purpose of draining accumulated air or fluid in the pleural cavity. Small-bore chest tubes (${\leq}14F$) are generally recommended as the first-line therapy for spontaneous pneumothorax in non-ventilated patients and pleural effusions in general, with the possible exception of hemothoraces and malignant effusions (for which an immediate pleurodesis is planned). Large-bore chest drains may be useful for very large air leaks, as well as post-ineffective trial with small-bore drains. Chest tube insertion should be guided by imaging, either bedside ultrasonography or, less commonly, computed tomography. The so-called trocar technique must be avoided. Instead, blunt dissection (for tubes >24F) or the Seldinger technique should be used. All chest tubes are connected to a drainage system device: flutter valve, underwater seal, electronic systems or, for indwelling pleural catheters (IPC), vacuum bottles. The classic, three-bottle drainage system requires either (external) wall suction or gravity ("water seal") drainage (the former not being routinely recommended unless the latter is not effective). The optimal timing for tube removal is still a matter of controversy; however, the use of digital drainage systems facilitates informed and prudent decision-making in that area. A drain-clamping test before tube withdrawal is generally not advocated. Pain, drain blockage and accidental dislodgment are common complications of small-bore drains; the most dreaded complications include organ injury, hemothorax, infections, and re-expansion pulmonary edema. IPC represent a first-line palliative therapy of malignant pleural effusions in many centers. The optimal frequency of drainage, for IPC, has not been formally agreed upon or otherwise officially established.

• 한국전자파학회논문지
• /
• 제21권12호
• /
• pp.1423-1431
• /
• 2010

본 논문은 평행 결합 선로를 이용한 이중 대역 소형 광대역 대역 통과 필터에 대하여 제안한다. 제안한 필터는 크기가 작고 대역폭의 조절과 이중 대역 운용이 가능하다. 뿐만 아니라 T-형태의 대역 저지 필터를 삽입하여 이중 대역의 지원이 가능하도록 하였다. 이중 대역의 대역 통과 필터는 첫 번째 운용 중심 주파수와 대역폭이 각각 5.8 GHz 및 60 %, 그리고 두 번째 운용 주파수 중심 주파수와 대역폭은 각각 16.2 GHz 및 60 %이다. 첫번째 주파수의 삽입 및 반사 손실은 각각 0.4 dB 및 17.4 dB를 갖고 있고, 두 번째 주파수의 삽입 및 반사 손실은 각각 0.62 dB 및 19.8 dB를 갖는다.

• 식물병연구
• /
• 제16권3호
• /
• pp.312-315
• /
• 2010

본 연구는 애기장대에서 무름병에 대한 저항성 유전자를 탐색하고자 2만여개의 T-DNA 삽입 돌연변이군을 이용하여 Pcc에 대한 스크리닝을 수행하고 이 방법을 소개한 연구다. 1차 선발을 통하여 15개의 저항성 line과 20개의 감수성 line을 선발하였으며, 이로부터 2차 선발하여 3개의 저항성 line과 4개의 감수성 line을 선발하였고, 최종적으로 3차 선발을 통하여 1개의 감수성 line (Atstp1)을 선발할 수 있었다. 현재 Atstp1을 이용해 flanking sequencing 하여 유전자를 탐색하고 있으며, 앞으로 클로닝을 통하여 다양한 무름병 저항성 식물 개발에 유용하게 이용될 것으로 기대한다.