• 제목/요약/키워드: inorganic material

검색결과 939건 처리시간 0.027초

유무기 TiO2-SiO2 혼성코팅에 미치는 전구체 배합비율의 영향 (Effect of Precursor Ratio on the Properties of Inorganic-Organic Hybrid TiO2-SiO2 Coating)

  • 김동규;맹완영
    • 한국재료학회지
    • /
    • 제26권5호
    • /
    • pp.271-280
    • /
    • 2016
  • When a single inorganic precursor is used for the synthesis of a sol-gel coating, there is a problem of cracking on the surface of coating layer. In order to solve this problem of surface cracking, we synthesized inorganic-organic coatings that have hybrid properties of inorganic and organic materials. Sols of various ratios (1:0.07, 0.2, 0.41, 0.82, 1.64, 3.26, 6.54, 13.2) of an inorganic precursor of Tetrabutylorthotitanate ($Ti(OBu)_4$, TBOT) and an organic precursor of ${\gamma}$-Methacryloxy propyltrimethoxysilane (MAPTS) were prepared and coated on stainless steels (SUS316L) by dip coating method. The binding structure and the physical properties of the synthesized coatings were analyzed by FT-IR, FE-SEM, FIB (Focused Ion Beam), and a nano-indenter. Dynamic polarization testing and EIS (electrical impedance spectroscopy) were carried out to evaluate the micro-defects and the corrosion properties of the coatings. The prepared coatings show hybrid properties of inorganic oxides and organic materials. Crack free coatings were prepared when the MAPTS ratio was above a critical value. As the MAPTS ratio increased, the thickness and the corrosion resistance increased, and the hardness decreased.

유기EL의 수명향상을 위한 혼합무기박막의 투습율 및 투산소율 특성 연구 (Study on Water Vapor and Oxygen Transmission Rates in Inorganic Composite Films to improvement life-time of OLEDs)

  • 김영민;이주원;김종무;박정수;성만영;장진;주병권;김재경
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
    • /
    • pp.189-192
    • /
    • 2004
  • To improvement life-time of the organic light emitting diodes(OLEDs). We investigate the inorganic composite film based on MgO and $SiO_2$ to protect from the moisture and oxygen. The inorganic composite films are added the base materials to the co-operate materials using the mixed process and it is deposited on plastic substrate by e-beam evaporator. In order to analyze as kinds of inorganic materials, Water Vapor method of Transmission Rate (WVTR) and Oxygen Transmission Rate (OTR) are measured by Permatran equipment(MOCON Corp.). For comparison. an MgD- and $SiO_2$-based composite film has lower values of WVTR and OTR than inorganic composite/compound films of ones. The results obtained here shows that this film is suitable for passivation layer to extend the life-time of OLEDs.

  • PDF

양극슬라임으로부터 무기침출제에 의한 금과 은의 침출 (Leaching of Gold and Silver from Anode Slime with Inorganic Reagents)

  • 행위동;이기웅;이만승
    • 자원리싸이클링
    • /
    • 제26권1호
    • /
    • pp.30-36
    • /
    • 2017
  • 양극흙에 함유된 금과 은을 회수하기 위해 무기산(염산, 질산, 황산)과 thiourea 및 thiosulfate에 의한 침출실험을 수행했다. 산화제를 첨가하지 않은 조건에서 금은 무기산용액에 전혀 용해되지 않았다. 3종류의 무기산의 농도가 동일한 조건에서 황산용액에서 은의 침출율이 가장 높았으며, 염산의 농도가 증가함에 따라 $AgCl_2{^-}$의 형성에 따라 은의 침출율이 증가하였다. 한편 주석은 질산용액에 전혀 용해되지 않았으나, 구리, 니켈과 아연은 본 실험조건에서 모두 용해되었다. 황산과 thiourea의 혼합용액에서 금과 은은 모두 용해되었다. Thiosulfate용액에 은의 일부가 용해되었으나, 금은 전혀 용해되지 않았다.

도자기 소지와 유약의 잔류 응력이 기계적 강도에 미치는 영향에 관한 연구 (A Study on the Effect of Residual Stress between Body and Glaze of Pottery on the Mechanical Strength)

  • 이진하;나은상;최성철
    • 한국재료학회지
    • /
    • 제9권2호
    • /
    • pp.181-187
    • /
    • 1999
  • In this study, the effect of residual stress on mechanical strength was investigated with 1 kind of whiteware body and 4 kinds of glazes which are produced in succeeding ceramic art place. Using dipping method, the body was coated for different times in order to manipulate the coating thickness and sintered in the different temperatures ($1200^{\circ}C$, $1250^{\circ}C$, $1300^{\circ}C$, $1350^{\circ}C$) for two thus hours. The sintered bodies were characterized by XRD, EPMA, FEM and UTM in order to study the forming of reaction layer between body and glazes, residual stresses and the effects of residual stresses on mechanical strength of pottery. At $1300{\circ}C$, we obtained maximum density and mechanical strength. By the finite element method, the residual stresses in surface of body were minimum in specific thickness of glazes and the mechanical strength of body in that thickness of glazes showed maximum when the firing temperature was settled.

  • PDF

섬유의 종류에 따른 폐유리와 무기결합재 인조석재의 역학적 특성 (Mechanical Properties of the artificial Stone According to the Ternary System Inorganic Composite and Waste Glass and Fiber type)

  • 유용진;김헌태;이상수;송하영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 춘계 학술논문 발표대회
    • /
    • pp.321-322
    • /
    • 2013
  • Recently, the exhaustion of resource and environmental damage is serious due to the global warming because of the CO2 exhaust and each type the natural aggregate picking described below. meanwhile, The rest is the actual condition gone to the dumping ground that there is nearly no use which the waste glass can recycle and it is recycled. This research applied the waste glass as the cement substitute material the inorganic binder and coares aggregate substitute material. It utilizes the substitute material of the cement according to it and natural aggregate and tries to develop the environment-friendly artificial stone. The inorganic binder used the blast furnace slag, red mud, and fly ash. The straight type steel fiber, PVA fiber, PA fiber, and cellulosic fiber were used with a kind of fiber. As to the experimental item according to it, the compressive strength is the flexural strength and compressive strength.

  • PDF

콜로이달 실리카와 실란으로부터 합성된 나노하이브리드 코팅 박막의 특성 (Properties of Nano-Hybrid Coating Films Synthesized from Colloidal Silica-Silane)

  • 나문경;안명상;강동필
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.232-233
    • /
    • 2006
  • In recent years the interest in organic/inorganic hybrid materials has increased at a fast rate. Nano organic-inorganic hybrid composites have shown advantages for preparing hard coating layers. Especially, nano hybrid composite has low environmental pollution. It has high transparency, hardness, toughness, thermal dissociation temperature, hydrophobicity by using nano sized inorganic material. There are many ways in which these materials may be synthesized, a typical one being the use of silica and silanes using the sol-gel process. The structure of sol-gel silica evolves as a result of these successive hydrolysis and condensation reactions and the subsequent drying and curing. The sol-gel reactions are catalyzed by acids and produce silica sol solutions. The silica sol grows until they reach a size where a gel transition occurs and a solid-like gel is formed. Colloidal silica(CS)/silane sol solutions were synthesized in variation with parameters such as different acidity and reaction time. In order to understand their physical and chemical properties, sol-gel coating films were fabricated on glass. From all sol-gel solutions, seasoning effect of sol-gel coating layer on glass was observed.

  • PDF

보강성 충진제를 첨가한 실리콘 고무의 난연 및 화재안전 특성에 관한 연구 (A Study on the Properties of Flame Retardant and Fire Safety of Silicone Rubbers Added Reinforcing Fillers)

  • 박승호;이성일
    • 한국전기전자재료학회논문지
    • /
    • 제32권4호
    • /
    • pp.349-355
    • /
    • 2019
  • A fire, be it caused intentionally or unintentionally, leads to economic loss and physical damage, and requires digestion. The number of fires is increasing yearly, and electrical fires account for more than 30% among the main causes of fires. Electric wires that catch fire typically employ silicone coatings; silicone has organic as well as inorganic properties. Silicon is a natural, nonexistent, synthetic product with numerous applications. In this study, a silicon rubber for application in wires was prepared by high-temperature vulcanization (HTV) with a Shore A hardness of 70. We report results for the flame retardancy test and the fire safety characteristics via inorganic analysis. For this, a quartz inorganic material was added to the wire specimen, and 18% powdered extinguishing agent ammonium phosphate and expanded vermiculite respectively. Thus, expanded vermiculite showed the best flame retardancy and fire safety characteristics.

생체모방기술을 이용한 Boron Nitride /PMMA 복합체 제조 (Biomimetic Preparation of Boron Nitride /PMMA Composite)

  • 남경목;이윤주;김보연;권우택;김수룡;신동근;김영희
    • 한국세라믹학회지
    • /
    • 제51권2호
    • /
    • pp.103-106
    • /
    • 2014
  • Nacre is an organic-inorganic composite material; it is composed of $CaCO_3$ platelet and protein. The microstructure of nacre is a matrix that is similar to bricks and mortar. Technology inspired by nature is called biomimetic technology. In this study, to make high thermal conducting ceramic composite materials using biomimetic technology, a porous green body was prepared with BN platelets. PMMA was infiltrated into the porous green body to make a composite. The microstructure of the composite was observed with FESEM, and the thermal properties were measured. The thermal conductivity of the prepared organic-inorganic composite was 4.19 $W/m{\cdot}K$.

무기질계 가소성 TBM 뒤채움재 개발 및 성능 (Development and performance of inorganic thixotropic backfill for shield TBM tail voids)

  • 이성우;박진성;유용선;최병훈;정혁상
    • 한국터널지하공간학회 논문집
    • /
    • 제24권3호
    • /
    • pp.263-278
    • /
    • 2022
  • 본 논문에서는 가소성 특성을 지니는 TBM 뒤채움재의 개발과 성능을 연구하기 위하여 실험한 내용을 다루고 있다. 쉴드 TBM 굴진 시 배면을 충전하는 방법으로 현재 LW 뒤채움재를 사용해오고 있는데, LW 뒤채움재는 강도 저하로 인한 침하발생, 지하수에 의한 재료분리, 가소성 저하와 같은 단점을 가지고 있다. 이러한 문제점을 개선하기 위하여 개발한 무기질계 가소성 뒤채움재의 성능을 분석하기 위해 실내시험과 모형실험을 수행하였다. 실내시험 결과, 무기질계 가소성 뒤채움재는 LW 뒤채움재 대비 재령 1시간의 일축압축강도가 12배 이상 높게 나타났고 블리딩률은 8.3배 이상 낮게 측정되었으며 플로우 값은 27배 이상 높게 나타났다. 이러한 결과로 미루어볼 때 무기질계 가소성 뒤채움재가 강도 저하, 재료분리, 주입성면에서 LW보다 성능이 우수한 것으로 판단된다. 또한 충전 성능을 분석하기 위해 모형 주입장치 시험기를 제작하였고, 수중에서 재료분리 발생여부를 육안으로 확인하였으며, LW 뒤채움재보다 ITB의 충전율이 20% 이상 높게 나타났다. 이는 무기질계 가소성 뒤채움재가 지하수에 의한 재료분리를 방지하며, 터널의 공동 발생을 억제시킬 것으로 판단된다.