• Korean Management Science Review
• /
• v.29 no.3
• /
• pp.45-65
• /
• 2012

Test and evaluation of weapon system is an important task to evaluate the performance of overseas weapon system purchasing project. Especially, quantitative evaluation of performances is hardly completed in defense projects where multiple criteria are conflicted each other. In order to solve this problem, we apply Axiomatic Design (AD) and Inner Dependence AHP method. First, finite functional requirements (FRs) are categorized in hierarchy structure by selecting proper design parameters (DPs) to implement their corresponding FRs. If there are no ways to select DPs when design is coupled between FRs and DPs, then inner dependence is allowed to overcome the strict rule of independence in AHP. Second, the weights of DPs are calculated by applying both Inner Dependence AHP method for coupled design and normal AHP method for uncoupled or decoupled design. Finally, information axiom of AD is applied to the proposed weapon systems by calculating information contents for all parameters. Weapon system with minimum sum of information contents is considered as the best solution. The proposed method in this study should be used in multiple criteria decision making problems involving various conflicting criteria.

• Korean Journal of Environment and Ecology
• /
• v.34 no.5
• /
• pp.491-499
• /
• 2020

Increasing impervious surfaces can cause various physical and mental illnesses as well as further problems like deterioration of the thermal environment and disconnection of the water circulation system in the downtown area. This study is intended to suggest baseline data for the future creation or remodelation of large-scaled urban parks in consideration of human health on the aspect of climate by analyzing air ions condition and correlation analysis between air ions and meteorological elements depending on distances from the center in the urban park. The study site was divided into four types by distances from the center of Olympic Park in Songpa-gu, Seoul, then classified as A and B. After selecting 80 points to record, land coverage and vegetation status were investigated, and then meteorological elements and air ions were measured. First, the green space rate by section is A section Center (90%)> Inner (70%)> Outer-inner (10%) = Outer (10%), B section Center (100%)> Inner (60%)> Outer- In order of inner (30%)> Outer (0%). Second, for weather factors, the temperature was analyzed by Outer (24.18℃) > Outer-inner (22.90℃) > Inner (22.43℃) > Center (21.719℃). For relative humidity, center (46.49%) > Inner (43.36%) > Outer-inner (42.41%) > Outer (38.53%) was analyzed. Third, In the case of cations in the air ions, Outer(435.71ea/㎤) > Outer-inner(415.16ea/㎤) > Inner (389.46ea/㎤) > Center (352.64ea/㎤). In the case of negative ions, Center (569.72ea/㎤) > Inner (499.83ea/㎤) > Outer-inner(410.58ea/㎤) > Outer (292.02ea/㎤). It was analyzed to increase toward Center, and analyzed to decrease with increasing distance from road. For the Air ion index, it was analyzed as Center (1.67) > Inner (1.31) > Outer-inner (1.08) > Outer (0.71). Negative irons was analyzed to increase when its measuring points close to the center and decrease with shortening distance to the road. Fourth, as a result of correlation analysis, positive(+) correlation is negative ions and ion index. These were measured to increase as the recording points closing to the center of the park from the road. The negative(-) correlation is temperature, solar radiation, and positive ions. These increased as getting closer to the road.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.8-13
• /
• 2017

In this paper, the measurement of the inner diameter dimension of the circular hole by using a machine vision system was studied. This paper was focused on the theory and key technologies of machine vision inspection technology for the improvement of measurement accuracy and speed of the micro circular holes. A new method was proposed and was verified through the experiments on Gray conversion, binarization, edge extraction and Hough transform in machine vision system processes. Firstly, the Hough transform was proposed in order to improve the speed increase and implementation ease, it demonstrated the superiority of Hough transform and improvement through a comparative experiment. Secondly, we propose a calibration method of the system in order to obtain exactly the inner diameter of the circular hole. Finally, we demonstrate the reliability of the entire system as a MATLAB-based implementation of the GUI program, measuring the inner diameter of the circular hole through the circular holes of different dimensions measuring experiment.

• Tribology and Lubricants
• /
• v.36 no.2
• /
• pp.64-67
• /
• 2020

In the conventional gerotor design, the circular arc tooth of the outer rotor is first introduced, and then the inner rotor profile is generated by simulating the outer rotor motion while the inner rotor is fixed. The profile generation of tooth meshing exhibits relativity; therefore, the outer rotor profile can be generated by the movement of the inner rotor. In this study, we propose the design of a gerotor with a pin-tooth inner rotor. First, the pin-tooth inner rotor is devised, and then the outer rotor profile is generated. The profile of the inner rotor is simply composed of equally arranged pins along a circle. The root of the inner rotor is designed as a conjugated arc of two pins. The trajectory of the pin center is obtained by the inner rotor operation, and then the outer rotor profile is determined as a parallel curve of the trajectory. In this gerotor design, the inner rotor has a simple configuration, and contact occurs between the pin parts of the inner rotor and the whole profile of the outer rotor. This affects the material selection and machining process. The pin tooth can be used to design the outer and inner rotors, enabling a double gerotor mechanism corresponding to a planetary gear system.

• Journal of Global Scholars of Marketing Science
• /
• v.7
• /
• pp.55-69
• /
• 2001

This article focuses on subject of the present question to traditional market. These days traditional markets have systemic problems due to deterioration of the outer market circumstance and the inner defect and the inner frailty. In this situation, from the SangNam market case analysis, was traced the alternative activation strategies. Issued the 6 inner competency competition strategies for traditional market and issued 7 functional frame for organization system construction. Struggle strategies is built up of the inner organization solidarity and effective management system. So as to build struggle strategies, suggested and issued the 4 phase organization frame to strength stage of traditional market organization operating.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.6
• /
• pp.2831-2834
• /
• 2014

The aim of this study was to determine the mortality rate and burden of urinary tract cancers among residents of Inner Mongolia. We analyzed mortality data reported by the Death Registry System from 2008 to 2012. The rate of mortality due to urinary tract cancer was 2.04 per 100,000 person-years for the total population, 2.91 for men, and 1.11 for women. Therefore, the mortality rate for men was 2.62-fold the mortality rate for women, constituting a statistically significant difference (p<0.001). Over the period 2008 through 2012, the total potential years of life lost was 1388.1 person-years for men and 777.1 person-years for women, and the average years of life lost were 7.71 years per male decedent and 12.0 years per female decedent. Mortality due to urinary tract cancers is substantially greater among the elderly population. Further, the mortality rate associated with urinary tract cancers is greater for elderly men than it is for elderly women. Therefore, in Inner Mongolia, urinary tract cancers appear to pose a greater mortality risk for men than they do for women.

• Journal of the Korean Institute of Rural Architecture
• /
• v.5 no.2
• /
• pp.10-19
• /
• 2003

The purpose of this study was to analyze the formation and change of road-block-lot of the old inner city in cheongju The result of this study are as follows; (I)Among others a system roads of in around the old castle in cheongju city is most of feature north and south direction of road. Lot system is organic relations of north and south direction of road. Therefore, urban tissue in around the old castle in cheongju city is established order road system keep on the change of expansion urban tissue. (2) Block type classified into non-division, 2division and over 3division. (3) The square block remains mostly in Cheongju old castle, two-division block was around south of castle. And block of the grid-form street system divided into over 3 division. Through the guideline about characteristic of block type, residential area should be developed as a characteristics area in the urban area.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.363-368
• /
• 2002

An automobile hub is composed of a hollow cylindrical part with inner and outer diameters. These hub diameters must be precise, as any irregularities in them (diameters) can influence/degrade the motion of an automobile with this problem. Highly accurate and reliable hub inner and outer diameters measurement systems are therefore required for inspection of the diameters. In this research, an automobile hub inner and outer diameters measurement system has been developed and tested. The system consists of measuring heads with LVDT sensors, and associated software for automatic measurement and calibration of the diameters and the sensors respectively. The system has been evaluated in comparison with an existing measurement system, and the following outcomes have been achieved; .Improved and guaranteed quality and reliability .Increased productivity and cost reduction. These results prove the system developed in this research to be suitable for automobile hub inspection.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.58-67
• /
• 2006

In this paper, fuzzy logic based active ventilation system with security function is proposed and implemented. We can easily experience the situation that inner air is so hot to get start immediately after parking at summer day. Hot temperature is enough to explode a gas lighter or to suffocate a little chid. Proposed system has 1 blower and 2 axial fans to ventilate inner air. Based on the fuzzy logic, speed and direction of each fan are controlled. In addition to controlling fans, controller put down windows and adjust the periods of open time. In order to prevent the theft and security problems, IR sensors are used to detect objects. On detecting objects, controller put up windows. Experimental result shows that implemented system can be effectively ventilate inner air and reduce temperature. Proposed system can be applicable to commercial automobiles.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.6
• /
• pp.66-73
• /
• 2012

A pressure compensated chamber of a pilot mining robot isolates and protects an electrical-electronic system from the ambient highly pressured water. Since the inner pressure of the chamber is compensated with outer water pressure using hydraulic oil and pressure compensator, there exists a pressure difference, less than 1 bar, between outer and inner surface. The structural safety of the chamber is obtained relatively easier than the canister type which inner pressure is kept as the atmospheric pressure. However, due to the adoption of box shape for space efficiency and usage of the transparent engineering plastic viewport for checking inner circumstance, the viewport can be largely deformed. This large deformation can cause an additional tensile force, called the prying force, to the bolt-flange connection parts of the viewport. In this paper, we suggest the structural design equation considering the prying action for designing the structure of a box-shape pressure compensated chamber.