• Journal of Korean Neurosurgical Society
• /
• 제59권2호
• /
• pp.149-153
• /
• 2016

Objective : The aim of the present study is to estimate the incidence trend of head injury and the mortality based on traffic accident statistics and to investigate the impacts of rapid industrialization and economic growth on epidemiology of head injury in Korea over the period 1970-2012 including both pre-industrialized and post-industrialized stages. Methods : We collected data of head injury estimated from traffic accident statistics and seven hospital based reports to see incidence trends between 1970 and 2012. We also investigated the population structure and Gross National Income (GNI) per capita of Korea over the same period. The age specific data were investigated from 1992 to 2012. Results : The incidence of head injury gradually rose in the 1970s and the 1980s but stabilized until the 1990s with transient rise and then started to decline slowly in the 2000s. The mortality grew until 1991 but gradually declined ever since. However, the old age groups showed rather slight increase in both rates. The degree of decrease in the mortality has been more rapid than the incidence on head injury. Conclusion : In Korea during the low income stage, rapid industrialization cause considerable increase in the mortality and the incidence of head injury. During the high income stage, the incidence of head injury gradually declined and the mortality dropped more rapidly than the incidence due to preventive measures and satisfactory medical care. Nevertheless, the old age groups revealed rather slight increase in both rates owing to the large population structure and the declining birth rate.

• 자동차안전학회지
• /
• 제10권3호
• /
• pp.7-12
• /
• 2018

The Korean New Car Assessment Program (KNCAP) is a program to evaluate the safety of automobiles. In the safety assessment method, there are frontal collision, partial frontal collision, side collision, pillar collision, and left stability in the collision safety category. Among them, Korean in-depth analysis data shows that there are a lot of side collision accidents and it is necessary to protect them. This study will analyze the side collision accident that occurred in actual traffic accident based on Korea In-Depth Accident Study (KIDAS) and investigate the effect of center airbag on passenger in under side collision. In addition, with simulated side collision scenarios in the various side impact directions, it was investigated how the center airbag affects the driver and passenger in terms of kinematic and injury levels.

• 자동차안전학회지
• /
• 제12권1호
• /
• pp.6-14
• /
• 2020

Personal mobility, which was used exclusively for leisure activities, has recently been used as a means of transportation, and it is expected to increase its role as the next generation transportation. Sales of personal mobility are increasing rapidly, but the problem is that traffic accidents are also increasing. In this study, human body injury caused by various collisions between electric wheel users and road users that occur on bicycle or pedestrian roads mainly used by personal mobility is analyzed through collision analysis and collision risk analysis. In the case of the collision accident for electric wheel, it is analyzed that the road users are more likely to be injured on the pedestrian road than the bicycle road. In addition, the head hit each other or fall and hit the floor caused severe head injury.

• 한국산업정보학회논문지
• /
• 제20권3호
• /
• pp.71-79
• /
• 2015

우리나라에서는 손상 질환에 대한 발생률 및 인구사회학적 특성에 관한 연구는 찾기 어려운 실정이어서 본 연구는 한국의료패널(2008)의 설문조사 자료와 사회 경제적비용을 추계하여 분석하였다. 특히, 사고 손상 중독 유형별 사회적 비용과 의료이용 형태에 따른 사회적 비용을 추계하였다. 향후, 손상 발생률 감소와 의료비 감소를 위한 연령, 교육, 경제소득. 사고 발생장소 등에 맞는 구체적인 예방프로그램을 개발하고 또한 지속적인 손상예방 교육이 필요하고, 우리나라 손상의 사회경제적비용을 줄이기 위한 건강보험의 효율적 운영과 개인의 참여와 사회적, 국가적 노력이 필요하다.

• 디지털융복합연구
• /
• 제16권7호
• /
• pp.461-467
• /
• 2018

본 연구의 목적은 융 복합 시대 스키 리조트 안전사고(스키, 스노보더) 상해유형의 차이를 검증하여 보다 개선된 안전관리 방안마련에 기초자료로 제공하는데 있다. 이러한 연구목적을 달성하기 위하여 2016-2017 겨울시즌 경기도에 위치한 2개 스키장의 안전사고일지에 기록된 총522명을 유 목적 표집하여 연구대상으로 선정하였다. 수집된 자료는 SPSS 21.0을 이용하여 빈도분석, 교차분석을 실시하였으며, 그 결과는 다음과 같다. 첫째, 인구통계학적특성변인(강습유무)에 따른 부상부위에는 차이가 있는 것으로 나타났다. 둘째, 인구통계학적특성변인(종목, 강습유무, 종목${\times}$연령, 강습유무${\times}$성별)에 따른 부상형태에는 차이가 있는 것으로 나타났다. 셋째, 스키리조트 슬로프 수준에 따른 부상부위 및 부상형태에는 차이가 있는 것으로 나타났다.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.9-17
• /
• 2000

For the accident prevention, it is necessary to identify common factors and characteristics contributing to the industrial accidents. This study concerned with the accident characteristics by age of injured person in the manufacturing industries. To make the statistical comparisons for the accident characteristics by age group, we derived the distributions of occupational injuries in terms of accident time, accident type, activity at time of accident, injury type, injured part of body, agency of accident, and workday losses. The results show that the characteristics of the occupational injuries by age group are not significantly different in a31 characteristics investigated in this study.

• Journal of Trauma and Injury
• /
• 제27권3호
• /
• pp.50-56
• /
• 2014

Purpose: Rollover motor vehicle crashes have a higher injury severity and fatality than other motor vehicle crash types. From a left-quarter turn rollover accident of 25-passenger bus, we intend to assess the injury of the occupant and the injury severities according to the occupants' position. Methods: We carried out the 3 steps investigation of occupants' interview, visiting the repair shop and using the police report. We analyzed injuries sustained by occupants, and compared injury severities considering column, row in occupant's position and passenger interaction Results: The rollover involved 14 passengers in the bus who were all old women except a man driver. The most common injury was in the upper extremity, with six occurrences being a left clavicle fracture. Major injuries including hemothorax and pneumothorax were diagnosed at left side of the occupant. In the comparison of injury severity among driver's column (left side), mid column and passengercolumn, ISS of passenger column was the highest ($9.9{\pm}7.4$, $8.8{\pm}5.5$, and $10.3{\pm}4.0$, respectively, p>0.05). The injury severity of multiple occupants by row was higher than that of single occupant (10.8 vs. 3, p<0.05). Conclusion: An occupant must fasten their seat belt to prevent an injury by passenger interaction in the left-quarter turn rollover accident of a bus.

• 대한안전경영과학회지
• /
• 제18권1호
• /
• pp.35-43
• /
• 2016

The past five years, industrial accidents due to food processing machinery have been occurred 725 cases, injury by the food cutter occurred 390 cases in its. On this study, to prevent food cutter injury, an attempt is made to present the improved documentation of fundamental safety of the food cutter workplace through the injury analysis of food cutter injury and surveys on band saw machine business field. Analyzing the result of 390 cases on food cutter injury, amputation, cut, puncture occupied 75.1 percent (293 cases), compressed occupied 23.3% (91 cases), also it showed constant component without reference to gender, age, scale of work place, service period. In the survey, lack of concentration for workers have been pointed out as the biggest factor in the cause of band saw machine injury. Meanwhile, such as the EU and Japan, whereas presents safety standards about band saw machines that are tailored to each country, on the other hand, South Korea doesn't provide the standards. To prevent the food cutter injury, safety standards need to be established in consideration of amputation, cut, puncture, compressed injury and financial support is required to procure protective equipment at each place of business.

• Safety and Health at Work
• /
• 제9권2호
• /
• pp.140-143
• /
• 2018

Background: The Occupational Safety and Health Monitoring and Assessment Tool (OSH-MAT) is a practical instrument that is currently used in the German woodworking and metalworking industries to monitor safety conditions at workplaces. The 12-item scoring system has three subscales rating technical, organizational, and personnel-related conditions in a company. Each item has a rating value ranging from 1 to 9, with higher values indicating higher standard of safety conditions. Methods: The reliability of this instrument was evaluated in a cross-sectional survey among 128 companies and its validity among 30,514 companies. The inter-rater reliability of the instrument was examined independently and simultaneously by two well-trained safety engineers. Agreement between the double ratings was quantified by the intraclass correlation coefficient and absolute agreement of the rating values. The content validity of the OSH-MAT was evaluated by quantifying the association between OSH-MAT values and 5-year average injury rates by Poisson regression analysis adjusted for the size of the companies and industrial sectors. The construct validity of OSH-MAT was examined by principle component factor analysis. Results: Our analysis indicated good to very good inter-rater reliability (intraclass correlation coefficient = 0.64-0.74) of OSH-MAT values with an absolute agreement of between 72% and 81%. Factor analysis identified three component subscales that met exactly the structure theory of this instrument. The Poisson regression analysis demonstrated a statistically significant exposure-response relationship between OSH-MAT values and the 5-year average injury rates. Conclusion: These analyses indicate that OSH-MAT is a valid and reliable instrument that can be used effectively to monitor safety conditions at workplaces.

• 한국응급구조학회지
• /
• 제8권1호
• /
• pp.161-168
• /
• 2004

The workers of limestone industry have relatively higher rate of accident and injury than other industry workers. This survey was conducted to provide the informations for the planning of safety and health educations to prevent the accident and injury. The purpose of this study is to identify the morbidity rate per month and to determine the related health factors, and to find accident experiences of the limestone workers and to analyze the reasons and types of that accidents. The study design was a descriptive survey. Self reporting questionnaires developed by researcher were used for data collection. The subjects of this study were 225 workers in limestone industries in Jecheon city. The statistical methods utilized for data analysis were frequency analysis, $x^2$-test with SPSS-pc(ver.9.0). The results are as follows, 1. The workers morbidity rate per month was 22%, and morbid factors were Flu., G-I trouble, hypertension, orthopedic trauma, external wound, burn, etc., and the related health factors are self-assessment for health, exercise, accessability for medical facilities. 2. 40% of the subjects have experienced the accidents during last 6 months. The types of the accidents were safety violations, traffic accidents and fire accidents. Injury types were external wounds, fracture/amputation and burn. The workers of limestone industry have higher morbidity rate and experiences of accidents. Therefore the more increased safety and health educations than now for both the workers and the managers are needed. And this study could be helpful to increase the quality and the quantity of the educations needed.