• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.73-81
• /
• 2012

In this paper, we propose a high-speed synchronization method for Digital Radio Mondiale (DRM) receivers. In order to satisfy the high-speed synchronization requirement of DRM receivers, the proposed method eliminate the initial sampling frequency synchronization process in conventional synchronization methods. In the proposed method, sampling frequency tracking is performed after integer frequency synchronization and frame synchronization. Different correlation algorithms are applied to detect the first frame of the Orthogonal Frequency Division Multiplexing (OFDM) demodulation symbol with sampling frequency offset (SFO). A frame detection algorithm that is robust to SFO is selected based on the performance analysis and simulation. Simulation results show that the proposed method reduces the time spent for initial sampling frequency synchronization even if SFO is present in the DRM signal. In addition, it is verify that inter-cell differential correlation used between reference cells is roubst to the effect of initial SFO.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.43-48
• /
• 2010

In general, in order to reduce an initial cell searching time, W-CDMA systems adopt a three-step cell search scheme: slot synchronization, frame synchronization, and primary scrambling code identification. We consider the second step (frame synchronization), in which a coherent detection using P-SCH (primary synchronization channel) is possible. In this paper, we propose a new coherent detection scheme, where a first order recursive filter is used to enhance channel estimation performance. Computer simulation results indicate that the detection performance of the proposed scheme can be robust over large range of frequency offset.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1860-1875
• /
• 2013

In this paper, we present a comparative performance evaluation of the sampling frequency synchronization method that eliminates the initial sampling frequency offset (SFO) to reduce the overall synchronization time in Digital Radio Mondiale (DRM) receivers. To satisfy the advanced synchronization performance requirements of DRM receivers, we introduce the conventional DRM synchronization method (Method 1) and another method (Method 2), which does not perform the initial sampling frequency synchronization in the conventional synchronization method (both methods are mentioned later in this paper). To demonstrate the effectiveness of the performance evaluation, analytical expressions for frame detection are derived and simulations are provided. Based on the simulations and numerical analysis, our result shows that Method 2, with a negligible performance loss, is robust to the effects of the initial sampling frequency synchronization even if SFO is present in the DRM signal. In addition, we verify that the inter-cell differential correlation used between reference cells is robust to the effect of the initial SFO.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7A
• /
• pp.552-559
• /
• 2012

In this paper, we introduce a frame structure of the satellite TDMA network and the synchronization method thereof. The primary station transmits a special burst called reference burst which provides reference time to network. By using this reference burst all nodes achieve initial acquisition and synchronization. We consider time drift due to the node and satellite mobility, time shift due to the node position, Doppler shift due to the node mobility and frequency offsets as important factors of the frame structure. Simulation results show that the proposed frame structure and synchronization method guarantee accurate synchronization performance when the node is even in low SNR as well as 25 kHz frequency offsets.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1631-1641
• /
• 2012

A TDMA system in satellite communication has been utilized. Especially DVB-S2 was standardized and now operated in satellite broadcasting system. In this paper, we propose a TDMA frame structure appropriate for special purpose which has the good reliablilty in a poor RF environment even if frequency efficiency is decreased. TDMA frame duration is 12 seconds which is long duration in comparison with general TDMA system with several ms. Designing the frame structure, time and frequency shift in single frame duration are considered. Simulation results show that the proposed frame structure and synchronization method has robust synchronization performance when the terminal is even in low SNR as well as 25 kHz frequency offsets.

• Journal of Broadcast Engineering
• /
• v.21 no.6
• /
• pp.899-912
• /
• 2016

In ATSC 3.0 systems, a bootstrap signal is located at the start of each frame. In this paper, we propose an initial synchronization scheme for ATSC 3.0 systems using the bootstrap signal. The bootstrap signal of ATSC 3.0 has several repetition patterns in the time domain. By utilizing the repetition patterns within the bootstrap, the proposed scheme can obtain an initial synchronization at the receiver. Also, simulation results show that the proposed scheme can obtain an initial synchronization at very low signal-to-noise ratios.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.139-147
• /
• 2008

DVB-S2 (Digital Video Broadcasting-Satellite, Version 2) system transmits frames which adapt their structures based on the channel conditions, thus requiring simultaneous detection of the start of the Same (SoF) and the frame structure at the initial acquisition stage of the receiver. Also, a very low value of the minimum operating signal-to-noise ratio (SNR) for the acquisition necessitates a method utilizing multiple received frames to meet the required performance. In this paper, performance of joint time synchronization and frame structure detection methods using multiple DVB-S2 frames is evaluated by deriving the detection error probability. In particular, we evaluate the performance and complexity variations when the soft- and hard-decision values of the signal correlation output are used, present the synchronization parameters to optimize the performance, and verify the analysis results via computer simulations.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.215-215
• /
• 2004

• 전자공학회논문지 IE
• /
• v.48 no.1
• /
• pp.30-35
• /
• 2011

In this paper, we propose a method to improve the performance of initial channel estimation (CE) for the multiband-OFDM (MB-OFDM) UWB. The performance of the initial CE can be generally improved as increasing the number of the used preamble symbols. The MB-OFDM specification presents two CE symbols per band in preamble format. The performance of CE estimation with two CE symbols may be satisfied in relatively high sensitivity -77.5 and -72.5 dBm for 200 Mbps and 480 Mbps data rate, respectively, but can not be enough in the degraded 55 Mbps and 110 Mbps sensitivities such as -83.5 and -80.5 dBm, respectively. A method proposed in this paper achieves the performance improvement by extending CE estimation region to packet synchronization (PS) symbols and frame synchronization (FS) symbols including two CE symbols. This can improve the CE performance in the degraded SNR and increase the link-margin by reducing the error rate in physical-layer header. The link-margin improvement obtained by the proposed CE preamble can induce the decrease of error-rate in physical-layer header and increase of communication throughput. Simulation results for the proposed initial method show that the performance is improved by about 0.7 dB at 10-4 bit-error-rate using '4' symbols than initial method using only two CE symbols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7A
• /
• pp.733-742
• /
• 2008

In 3GPP LTE downlink system, initial cell search is essential for mobile station to connect to base station. In order to obtain information of the base station, the mobile station detects frame timing, frequency offset, and cell identification using primary synchronization channel(PSC) and secondary synchronization channel(SSC), which are defined in downlink OFDMA specification. In this paper, we analyze various detection algorithms in practical environment of inter-cell-interference, frequency offset, and multi-path fading channel and propose the optimal algorithm. Simulation results show that partial correlation method (for PSC acquisition) and interference cancellation method (for SSC detection) are the most superior algorithms among the applicable algorithms. Employ these two algorithms for receiver design, initial cell search is performed with 99% probability within 70ms in the channel environment considered.