• 한국결정성장학회지
• /
• 제14권4호
• /
• pp.169-173
• /
• 2004

보석용 루비의 가치평가 요소와 그 시장가격의 관련성을 분석하기 위하여 루비의 주요 평가요소인 중량, 색. 투명도 및 처리여부에 따른 가격의 변화를 Palmieri's Market Monitor를 이용하여 분석하였다. 그 결과 루비의 가치평가 요소가 복합적으로 기여하여 그 시장가격을 형성하고 있으며, 가치평가 요소 가운데에서 중량에 의한 가격 상승률이 가장 높고, 그 다음이 색이며, 투명도에 의한 가격 상승률은 가장 낮다는 것과 또한 열처리되지 않은 미얀마 루비는 열처리된 루비에 비해 가격 상승률이 더 높다는 것을 알 수 있었다.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.196-202
• /
• 2017

The occurrence of ferroresonance in electrical systems including nonlinear inductors such as transformers will bring a lot of malicious damages. The intense ferromagnetic saturation of the iron core is the most influential factor in ferroresonance that makes nonsinusoidal current and voltage. So the nonlinear behavior modeling of the magnetic core is the most important challenge in the study of ferroresonance. In this paper, the ferroresonance phenomenon is investigated in a single phase transformer using the finite element method and considering the hysteresis loop. Jiles-Atherton (JA) inverse vector model is used for modeling the hysteresis loop, which provides the accurate nonlinear model of the transformer core. The steady-state analysis of ferroresonance is done while considering different capacitors in series with the no-load transformer. The accurate results from copper losses and iron losses are extracted as the most important specifications of transformers. The validity of the simulation results is confirmed by the corresponding experimental measurements.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.509-525
• /
• 2015

Predicting residual strength of corroded plates is of crucial importance for service life estimation of aged structures. A series of nonlinear finite element method is employed for ultimate strength analysis of stiffened plates with pitting corrosion. Influential parameters, including plate thickness, type and size of stiffeners, pit depth and degree of pitting are varied and more than 208 finite element models are analyzed. It is found that ultimate strength is reduced by increasing pit depth to thickness ratio. Thin and intermediate plates have minimum and maximum reduction of ultimate strength with stronger stiffeners, respectively. In weak stiffener, reduction of ultimate strength in thin and intermediate plates depends on DOP. Reduction of ultimate strength in thick plates depends on thickness of plate and DOP. For intermediate plates, reduction for all stiffeners regardless of shape and size are the same.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.296-299
• /
• 2007

The focus of this study is to estimate the stiffness factor of the separator plate of MCFC (Molten Carbonate Fuel Cell) at the elevated temperature. The process factors affecting the stiffness of the separator plate were chosen to determine the most important factor using the finite element analysis with the Taguchi method. The most influential factor, picked out by the ANOYA, turned out the pitch in the separator plate.

• Structural Engineering and Mechanics
• /
• 제66권4호
• /
• pp.423-438
• /
• 2018

This pioneer study focuses on finite element modeling and numerical modeling of three types of Reinforced Concrete Haunched Beams (RCHBs). Firstly, twenty RCHBs, consisting of three types, and four prismatic beams which had been tested experimentally were modeled via a nonlinear finite element method (NFEM) based software named as, ATENA. The modeling results were compared with experimental results including load capacity, deflection, crack pattern and mode of failure. The comparison showed a good agreement between the results and thus the model used can be effectively used for further studies of RCHB with high accuracy. Afterwards, new mechanism modes and design code equations were proposed to improve the shear design equation of ACI-318 and to predict the critical effective depth. These equations are the first comprehensive formulas in the literature involving all types of RCHBs. The statistical analysis showed the superiority of the proposed equation to their predecessors where the correlation coefficient, $R^2$ was found to be 0.89 for the proposed equation. Moreover, the new equation was validated using parametric and reliability analyses. The parametric analysis of both experimental and predicted results shows that the inclination angle and the compressive strength were the most influential parameters on the shear strength. The reliability analysis indicates that the accuracy of the new formulation is significantly higher as compared to available design equations and its reliability index is within acceptable limits.

• Structural Engineering and Mechanics
• /
• 제35권2호
• /
• pp.127-140
• /
• 2010

This paper focuses on a number of criteria that enable controlling the influence of geometric simplification on the quality of finite element (FE) computations. To perform the mechanical simulation of a component, the corresponding geometric model typically needs to be simplified in accordance with hypotheses adopted regarding the component's mechanical behaviour. The method presented herein serves to compute an a posteriori indicator for the purpose of estimating the significance of each feature removal. This method can be used as part of an adaptive process of geometric simplification. If a shape detail removed during the shape simplification process proves to be influential on mechanical behaviour, the particular detail can then be reinserted into the simplified model, thus making it possible to readapt the initial simulation model. The fields of application for such a method are: static problems involving linear elastic behaviour, and linear thermal problems with stationary conduction.

• 한국소음진동공학회논문집
• /
• 제24권10호
• /
• pp.749-755
• /
• 2014

The analytical-finite element(FE) squeal model is applied to investigate the squeal propensity associated with contact stiffness of the disc brake system. The system contact stiffness is incorporated into the perturbed equations of motion in the analytical manner where the brake components are modeled by FE method. The results show that the contact stiffness of the friction material and the contact stiffness between the pads and caliper are the influential factors on the squeal propensity. Particularly, the modal instability of the 3200 Hz squeal mode drastically changes with respect to the contact stiffness between the pads and caliper.

• Advances in materials Research
• /
• 제6권4호
• /
• pp.349-361
• /
• 2017

The nonlinear thermal buckling load parameter of the laminated composite panel structure is investigated numerically using the higher-order theory including the stretching effect through the thickness and presented in this research article. The large geometrical distortion of the curved panel structure due to the elevated thermal loading is modeled via Green-Lagrange strain field including all of the higher-order terms to achieve the required generality. The desired solutions are obtained numerically using the finite element steps in conjunction with the direct iterative method. The concurrence of the present nonlinear panel model has been established via adequate comparison study with available published data. Finally, the effect of different influential parameters which affect the nonlinear buckling strength of laminated composite structure are examined through numerous numerical examples and discussed in details.

• Structural Engineering and Mechanics
• /
• 제85권3호
• /
• pp.353-367
• /
• 2023

An extended parametric study based on nonlinear finite element analyses is performed to assess the key factors affecting the shear behaviour of exterior beam-column joints of unbraced reinforced concrete frames. Extensive results are presented, the major conclusion being that the few shear behaviour models for exterior reinforced concrete beam-column joints available in the literature do not properly account for some of the most influential factors. The present results are also compared with recently published results for interior joints, showing that while some factors have a similar influence on interior and exterior joints others are relevant for only one of these types of joints. This also confirms, numerically, that some resisting mechanisms of exterior joints differ from those of interior joints.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.247-255
• /
• 2008

현행 도로설계의 기준이 되는 "도로의 구조 시설 기준에 관한 규칙 해설 및 지침"에서는 설계속도에 따라 도로 선형별 최소 설계기준을 정하고 있으며, 이 기준을 만족시키면 교통안전성 이 확보되는 것으로 규정하고 있다. 이러한 설계기준에 적용되고 있는 개별 설계요소들은 원칙적으로 차량 및 운전자 특성을 감안하여 설치기준이 정립되었으나, 설계요소간의 연관성 또는 일관성에 대한 깊이 있는 연구를 통해 제반 기준이 정립된 것은 아니다. 결과적으로, 현재의 도로설계기준이 개별 설계 요소들의 조합에 의해 결정되는 도로의 안전성, 일관성 문제를 모두 고려하지는 못하였다. 따라서, 본 연구에서는 기존의 설계기준에 내재된 문제점을 인지하고 해결을 위해 우선적으로 3차원 가속도를 고려한 선형 설계방안에 대한 연구를 수행하였으며, 이를 통해 더욱 안전하고 조화로운 도로건설을 유도하고자 한다.