• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.4
• /
• pp.269-278
• /
• 1989

When the induction motor is operated by CSI, the commutation capacitance in the CSI circuit is increased according to the increase of large capacitor system. The output voltage spikes are generated at the moment of charge and discharge of the commutation capacitor. Also, since output current comprise a great number of harmonics, torque ripples of the motor are generated, having bad effects on the motor. In this study, by adopting the 18-phase multiple high Frequency Current Source Inverter (HFCSI), torque ripples generated by the voltage spikes are mostly eliminated except the 17th and 19th harmonics. To reduce the voltage spikes comprised in the output voltage, particularly, the methods of eliminating the cause of bad effect upon the motor are proposed in this paper. In the proposed method, by using additional voltage Clamping Curcuit (VCC), it is possible to select the values of commutation capacitor energy loss in commutating, the commutating capacitor, and the capacitor in the clamping circuit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4522-4528
• /
• 2010

The single phase switched reluctance motor has simple, robust structure and economical drive system. So, it is useful to apply in the industrial and home applied machines. Especially, the single phase induction motor, used much in field, has a low efficiency and control ability. For the replacement of it, the single phase SRM is presented. In this paper, the design and characteristics of single phase SRM considering the rotor shape will be presented in the base of general electric motor design method and poly phase SRM design method.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.3
• /
• pp.55-63
• /
• 1996

In this paper, a vector control system is implemented to drive CRPWM inverter fed induction motor. The rotor flux is estimated using the rotor coordinates flux model and the stator coordinates ramp comparison controller is used as a current controller. The microcontroller 80C196 is used for the computation of the estimation of the rotor flux, the speed controller, the flux controller, the vector rotation, and the phase transformation The current controller is implemented using the analog circuit in order to reduce the burden of the microcontroller. For the proposed system, the digital simulation is performed to examine the feasibility and the superior characteristics of the current controller and the system transient response is verified through the experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.1
• /
• pp.9-15
• /
• 2018

This study investigates a bidirectional quasi-Z-source inverter (Bq-ZSI) system with bidirectional power transfer capability and a modified space vector modulation scheme for reducing the ripple of the inductor current. By replacing the diode in the impedance network with an active switch, the power flow can be bidirectional. The average inductor current of the Bq-ZSI network is negative in the regenerative braking mode, thereby regenerating the power. In addition, modified space vector modulation scheme is applied to the Bq-ZSI to control shoot-through time effectively. A 5 kW prototype is built and tested to implement the proposed system. Experimental results show that the Bq-ZSI system is capable of regenerative braking of the induction motor and that the modified space vector modulation method is efficient.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.7
• /
• pp.770-777
• /
• 2012

This paper deals with the design and modal characteristics analysis of a drive-train for a paralleltype hybrid electric vehicle (HEV). The function of the drive-train system (DTS) in the HEV combines or divides the torque and velocity from the internal combustion engine along with the induction motor. The system consists of a compound planetary gear and unit's electromagnetic clutch to provide the operation modes such as Engine Only (EO), Electric Vehicle (EV), and Hybrid Electric Vehicle (HEV) modes. In order to investigate the characteristics of the velocity and torque flow for the system, dynamic models of the HEV with DTS are derived from the prototype DTS. The performance of the derived dynamic models is evaluated by both computer simulations and experiments according to each mode.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.44-51
• /
• 2019

Tunnel Boring Machine's Technology has depends mostly on imports, currently domestic technology development was proceeding. There are many technologies in this field, above all, the large-capacity motor drive technology required for excavation is one of the core technologies. In particular, when several large motors are simultaneously starting, there are many problems due to a large starting current at that time, and it is difficult to design and operate a power receiving facility. In this paper, A method of reducing the starting current by using the regenerative power generated by the deceleration of the motor has been studied. To verify this proposal, we designed the induction motor controller using CAE based power simulation tool and verified the results of the proposed method by applying the reduced model. As a result, it is possible to reduce the maximum starting current and shorten the start-up time. Moreover, even if several motors are connected to one bank, it is proved that the method can be efficiently operated by using the sequential braking / starting sequence. In the case of a power system in which a large capacity electric motor such as a tunnel excavation system is driven, the results of this study are expected to be a stable and effective method for solving the start-up current problem and designing the power receiving facility.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1005-1013
• /
• 2012

In this paper, the induction motor in indirect vector control method modeling, from indirect vector control method it undergoes an influence to the $1/{\tau}$. When changing a rotor resistance because being like this quality Matlab/Simulink where it will make what kind of effect in speed presumption it led proposed control system used microprosser TMS320C31 DSP for high speed processing. The effectiveness of the proposed system is verified by simulation and experimental results. This result shows highly characteristic speed estimation and robust character of load regulation. and the flux which it follows in change of parameter and speed presumption it was under simulation and get the good result which it comes to get it analyzed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.295-299
• /
• 2007

This paper presents the photovoltaic(PV) water pumping system with a maximum power point tracking(MPPT). The wale- pumping system uses a variable speed single phase induction motor(SPIM) driven a centrifugal pimp by field oriented control(FOC) inverter. The MPPT using a DC-DC converter controlled the duty cycle to track maximum power from PV under different insolation conditions. The duty cycle directly relate with a flux producing current control($i_{ds}$). The FOC inverter uses a current control voltage source inverter(CC-VSI). The simulation results are shown that the characteristics and performance of drive system, which varies as each conditions of light by expresses in voltage ($V_{dq}$), current($I_{dq}$), speed of motor and torque.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.175-178
• /
• 2002

In a conventional speed sensorless Stator Flux Oriented(SFO) induction machine drive system, the estimated speed is delayed in transients by the use of a low pass filter(LPF). To prevent extreme overshoot caused by this delay, PI controller gains should be small, which consequently is greatly affected by disturbance torque. In this paper, by taking advantage of disturbance torque observer and feedforward control, robust speed controller is designed for speed sensorless SFO system. The proposed method is verified by the simulation results.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.4
• /
• pp.225-234
• /
• 2003

Turbo compressors need high speed rotating impeller in structure, high rate gearbox and conventional induction motor. This mechanical system increased moment of inertia and mechanical friction loss. Recently turbo compressor has adopted a super high-speed motor and driver and have made its size smaller and mechanical friction loss at minimum. In this paper, variable super high - speed motor controller, compressor controller and MMI controller are implemented with only one DSP (TMS320VC33) chip for a 150HP, 70,000rpm direct drive turbo compressor. It was required hardware and software integration. The result of integration, Controller hardware became simple and all control software are developed same developing tool. The implements turbo compressor meets the requirements.