Development of An Integrated Controller for a Direct Drive Turbo Compressor

직접 구동방식 터보 압축기를 위한 통합 제어기 개발

  • 권정혁 (삼성테크윈 파워시스템연구소 전기전자Lab) ;
  • 변지섭 (삼성테크윈 파워시스템연구소 전기전자Lab) ;
  • 최중경 (창원대학교 전자공학과 산업전자제어연구실)
  • Published : 2003.07.01

Abstract

Turbo compressors need high speed rotating impeller in structure, high rate gearbox and conventional induction motor. This mechanical system increased moment of inertia and mechanical friction loss. Recently turbo compressor has adopted a super high-speed motor and driver and have made its size smaller and mechanical friction loss at minimum. In this paper, variable super high - speed motor controller, compressor controller and MMI controller are implemented with only one DSP (TMS320VC33) chip for a 150HP, 70,000rpm direct drive turbo compressor. It was required hardware and software integration. The result of integration, Controller hardware became simple and all control software are developed same developing tool. The implements turbo compressor meets the requirements.

터보 압축기는 구조적으로 임펠러를 고속회전 시켜야한다. 범용전동기에 높은 기어비를 가진 기어박스를 이용하여 구현하였는데, 이는 관성 모멘트, 마찰손 및 압축기의 크기를 증가시켰다. 최근 터보 압축기의 연구는 초고속 동기전동기를 장착하고 있고 기어박스를 제거하여 크기와 마찰손을 최소화하는 방향으로 진행되고 있다. 본 연구에서는 150마력 70,000rpm 직접 구동방식의 터보 압축기를 개발하기 위하여 초고속 동기전동기용 인버터제어기, 공압제어기 및 MMI 기능을 통합한 단일 DSP(Digital Signal Processor) 구조의 통합제어기를 구현하였다. 이는 하드웨어적인 부분만 아니라 소프트웨어적인 측면에서도 역시 통합 작업이 필요하였다. 이러한 통합으로 하드웨어적으로는 제어 시스템이 간략화 되었으며, 소프트웨어적으로도 동일한 개발환경에서 각 제어기가 구현되고 통합되었다. 이를 개발 및 제작하여 150마력 70,000rpm 직접 구동 방식의 터보 압축기에 적용하였다.

Keywords

References

  1. Movhoub Mekhiche, James L. Kirtley, Mary Tolikas, 'High Speed Motor Driver for Industrial Applications,' IEMD '99, pp. 244-248, 1999 https://doi.org/10.1109/IEMDC.1999.769082
  2. Wen L. Soong, Gerald B. Kliman, Roger N. Johnson, Raymond A. White, Joseph E. Miller, 'Novel High Speed Induction Motor for a Commercial Centrifugal Compressor,' IEEE ISA, vol. 36, 2000 https://doi.org/10.1109/28.845043
  3. A. Whitfield, N.C. Baines, Design of radial Turbomachines, Longman, 31p, 1990
  4. Using Simulink, MathWorks
  5. Ralph L. Moore, 'Control of Centrifugal Compressors,' Instrument Society of American, Unit 5, 1989
  6. Longya Xu, Chagjiang Wang, 'Implementation and Experimental Investgation of Sensorless Control Schemes for PMSM in Super High Variable Speed Operation,' IEEE ISA, 1998 https://doi.org/10.1109/IAS.1998.732349
  7. Bon-Ho Bae, Seung-Ki Sul, Jeong-Hyeck Kwon, Jong-Sub Shin, 'Implementation of Sensorless Vector Control for Super-High Speed PMSM of Turbo-Compressor,' IEEE ISA, Chicago Annual Meeting, 2001 https://doi.org/10.1109/IAS.2001.955650