• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.26-30
• /
• 2011

Currently, many researches are carried out about tilting index table, which is one of the main component of 5-axis machine tool. The performance of the tilting index table is associated the rotational accuracy which is very important factor for high precision machining because it have an effect on machining error. In this paper, a tilting index table is developed, and the rotational accuracy of the tilting index table using a laser measurement equipment is measured. In addition, a correction value is obtained from the measured value through compensation, and the correction value is used to improve the accuracy of the table. Comparative analysis is carried out for the accuracy of the table before and after compensation. This paper can be used by a reference for performance and reliability advancement of tilting index table.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.570-575
• /
• 2010

This study is regarding development of an index table for antomation of welding process in impeller fabrication. A PLC, which is widely used for automation in industry, was also adopted as a controller for the index table because of it effectiveness, easy maintenance and repair. The index table consists of centering jig, blade jig, workbench, driving system and a controller. A touch screen was also prepaired as a man-machine interface to provide convenience for workers. Water jacket was installed inside the workbench to reduce thermal stress come from the welding. Temperature of the water jacket was kept constant to cool an impeller main plate effectively. The index table developed in this study convinces that it reduces the total welding time by 50% compared with the conventional process without the table.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.86-93
• /
• 2010

The tilting index table has attached to CNC machining center with 3axes, it can be improvement of its performance and its machining efficiency. The tilting index table is a key unit in order to manufacture some non-rotational and 3-dimensional parts, using the conventional machining center. In this study, structural analysis is carried out by FEM simulation using the commercial software ANSYS Workbench 11 to develop tilting index table using direct drive motor. The shape of the tilting index table obtained from the optimization was analyzed and compared with the initial model. Also, the initial model was modified based on the optimization model and the result was verified to have the acceptable improvement.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.7-12
• /
• 2011

In the recent field of 5-axis machine tools, it is necessary to improve machining ability. The tilting index table is a key unit in order to manufacture some non-rotational and 3-dimensional parts by using conventional machining centers. In this study, the structural analysis of a tilting index table is carried out and the displacement and distribution of stress in the tilting index table is analysed to design the table safely. The modal analysis is performed in order to confirm the frequency response about the vibration having a large effect on the machine tools. The dynamic analysis is performed in order to confirm the rigidity, and the structural stability has been verified.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.734-738
• /
• 1997

In this study, we developed the indexing table opering by pneumatic actuation. We doubled the torque of index table by using specialy desingned air pipe and two pistons. And by locating two pistons We perform several tests and this results is written below.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권8호
• /
• pp.2027-2041
• /
• 2013

In this paper, we propose a novel reversible data hiding scheme in the index tables of the vector quantization (VQ) compressed images based on index set construction strategy. On the sender side, three index sets are constructed, in which the first set and the second set include the indices with greater and less occurrence numbers in the given VQ index table, respectively. The index values in the index table belonging to the second set are added with prefixes from the third set to eliminate the collision with the two derived mapping sets of the first set, and this operation of adding prefixes has data hiding capability additionally. The main data embedding procedure can be achieved easily by mapping the index values in the first set to the corresponding values in the two derived mapping sets. The same three index sets reconstructed on the receiver side ensure the correctness of secret data extraction and the lossless recovery of index table. Experimental results demonstrate the effectiveness of the proposed scheme.

• 한국정밀공학회지
• /
• 제32권2호
• /
• pp.179-184
• /
• 2015

In the recent field of Machining, with the improving efficiency of processing, the index table is a key unit according to the increase of parts in available processing when working with the three axes at the same time. As an essential product of MCT, the index tables effect an influence on product quality of machined parts. Therefore, it is necessary to design the shape of index table with stability, high stiffness, lightweight structure. In this study, the optimal shape of index table was proposed using by design of experiment. The maximum displacement and stress analysis were carried out by using FEM software. The optimized shape was verified by using the statistical software. The results of shape optimization were confirmed that both displacement and stress were reduced in comparison with initial model.

• Journal of Information Technology Applications and Management
• /
• 제21권4_spc호
• /
• pp.381-401
• /
• 2014

This study proposes the accurate economic effect (employment inducement coefficient, hiring inducement coefficient, index of the sensitivity of dispersion, index of the power of dispersion, and ratio of value added) of Korea software industry by analyzing the inter-industry relation using the modified inter-industry table. Some previous studies related to the inter-industry analysis were reviewed and the key problems were identified. First, in the current inter-industry table publishedby the Bank of Korea, the output of software industry includes not only the output of pure software industry (package software and IT services) but also the output of non-software industry due to the misclassification of the industry. This causes the output to become bigger than the actual output of the software industry. Second, during rewriting the inter-industry table, the output is changing. The inter-industry table is the table in the form of rows and columns, which records the transactions of goods and services among industries which are required to continue the activities of each industry. Accordingly, if only an output of a specific industry is changed, the reliability of the table would be degraded because the table is prepared based on the relations with other industries. This possibly causes the economic effect coefficient to degrade reliability, over or under estimated. This study tries to correct these problems to get the more accurate economic effect of the software industry. First, to get the output of the pure software section only, the data from the Korea Electronics Association(KEA) was used in the inter-industry table. Second, to prevent the difference in the outputs during rewriting the inter-industry table, the difference between the output in the current inter-industry table and the output from KEA data was identified and then it was defined as the non-software section output for the analysis. The following results were obtained: The pure software section's economic effect coefficient was lower than the coefficient of non-software section. It comes from differenceof data to Bank of Korea and KEA. This study hasa signification from accurate economic effect of Korea software industry.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.347-348
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.553-554
• /
• 2011