Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study on the Laser Measurement Experiment for Performance Advancement of Tilting Index Table

틸팅 인덱스 테이블의 성능 향상을 위한 레이저 측정 실험에 관한 연구

  • 김광선 (창원대학교 대학원 기계설계공학과) ;
  • 이태호 ((주) 티에스티) ;
  • 이춘만 (창원대학교 기계설계공학과)
  • Received : 2011.09.30
  • Accepted : 2011.10.06
  • Published : 2011.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Currently, many researches are carried out about tilting index table, which is one of the main component of 5-axis machine tool. The performance of the tilting index table is associated the rotational accuracy which is very important factor for high precision machining because it have an effect on machining error. In this paper, a tilting index table is developed, and the rotational accuracy of the tilting index table using a laser measurement equipment is measured. In addition, a correction value is obtained from the measured value through compensation, and the correction value is used to improve the accuracy of the table. Comparative analysis is carried out for the accuracy of the table before and after compensation. This paper can be used by a reference for performance and reliability advancement of tilting index table.

Keywords

References

  1. Lee, M. J., Lee, C. M., "A Study on Structural Analysis and Optimum Shape Design of Tilting Index Table", Journal of Korean Society of Precision Engineering, Vol. 27, No. 2, pp. 347-348, 2010.
  2. Masaomi, T., Akinori, S., "Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements", International Journal of Machine Tools and Manufacture, Vol. 44, No. 12-13, pp. 1333-1342, 2004. https://doi.org/10.1016/j.ijmachtools.2004.04.013
  3. Jung, Y. H., Lee, D. W., Kim, J. S., Mok, H. S., "NC post-processor for 5-axis milling machine of table-rotating/tilting type", Journal of Materials Processing Technology, Vol. 130-131, No. 20, pp. 641-646, 2002. https://doi.org/10.1016/S0924-0136(02)00725-2
  4. E.L.J., Bohez., "Five-axis milling machine tool Kinematic chain design and analysis", International Journal of Machine Tools & Manufacture, Vol. 42, pp. 505-520, 2002. https://doi.org/10.1016/S0890-6955(01)00134-1
  5. Hwang, J. H., "Improvement of the Laser Interferometer Error in the Positioning Accuracy Measurement," Journal of Korean Society of Precision Engineering, Vol. 21, No. 9, pp. 167-173, 2004.
  6. 박천홍, "회전정밀도의 고정밀 측정기술", 한국정밀공학회지, 제21호, 제8권, pp. 7-13, 2004.
  7. 김재현, 이춘만, "틸팅 인덱스 테이블의 지그가 성능평가에 미치는 영향", 한국기계가공학회 춘추계학술대회, pp. 103-104, 2010.