• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1211-1214
• /
• 2003

The film is prepared by electron cyclotron resonance chemical vapor deposition (ECRCVD) employing CH$_4$ and H$_2$ gases. It is deposited by the control of microwave plasma power, gas flow ratio, deposition pressure, and In-situ thermal treatment temperature. The structure of a-C:H (hydrogenated amorphous carbon) thin film is analysed by FT-IR spectroscopy. The fraction sp$^3$ versus sp$^2$ bonding is very important to clear up the surface and interrace of a-C:H film properties such as nano-scale friction behavior. The sp$^3$ versus sp$^2$ bonding of a-C:H thin film is dependent on the deposition conditions, therefore. nano-scale friction behavior is dependent on the deposition conditions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.281-283
• /
• 2001

$Bi_{2}Sr_{2}CuO_{x}$(Bi-2201) thin films were fabricated by atomic layer-by-layer deposition using an ion bearn sputtering method. 10 wt% and 90 wt% ozone mixed with oxygen were used with ultraviolet light irradiation to assist oxidation. At early stages of the atomic layer by layer deposition. two dimensional epitaxial growth which covers the substrate surface would be suppressed by the stress and strain caused by the lattice misfit. then three dimensional growth takes place. Since Cu element is the most difficult to oxidize. only Sr and Bi react with each other predominantly. and forms a buffer layer on the substrate in an amorphous-like structure. which is changed to $SrBi_{2}O_{4}$ by in-situ anneal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.281-283
• /
• 2001

Bi$_2$Sr$_2$CuO$\_$x/(Bi-2201) thin films were fabricated layer-by-layer deposition using an ion beam sputtering method. 10 wt% and 90 wt% ozone mixed with oxygen were used ultraviolet light irradiation to assist oxidation. At early stages of the atomic layer by layer deposition, two dimensional epitaxial growth which covers the substrate surface would be suppressed by the stress and strain caused by the lattice misfit, then three dimensional growth takes place. Since Cu element is the most difficult to oxidize, only Sr and Bi react with each other predominantly, and forms a buffer layer on the substrate in an amorphous-like structure, which is changed to SrBi$_2$O$_4$ by in-situ anneal.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1081-1086
• /
• 2005

Dynamic behavior of carbon nanotubes (CNTs) in an electric field is directly observed by in-situ transmission electron microscopy (TEM). The CNT field emitters examined by in-situ TEM are multiwalled, double-walled and single walled CNTs. Threshold fields for electron emission and sustainable emission currents depending on the structure of CNTs are presented, and degradation mechanism of the CNT field emitters is discussed. In addition to the microscopy studies on individual CNTs, our recent development in surface treatment of CNT layers grown by chemical vapor deposition, which brings about high density of emission current and high uniformity, is also presented.

• 한국광학회지
• /
• 제4권3호
• /
• pp.260-265
• /
• 1993

실시간(in-situ) 스트레스측정 간섭계를 사용하여 이온보조증착에 의해 Ti$O_2$ 박막이 성장되는 동안에 박막내부의 스트레스를 측정하였다. 박막두께에 따른 스트레스의 변화는 이온빔에 의한 압축스트레스와 표면온도의 의해 결정되는 표면확산의 평형에 의해서 정성적으로 설병되어지며, 측정결과는 스트레스가 성장되는 박막에 전달되는 이온빔의 운동량에 따라 증가한다는 Windischmann의 모델과 일치하였다.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1546-1549
• /
• 2018

We have investigated core-levels of ZnO thin films at the interface with the graphene on Cu foil using in-situ X-ray Photoelectron Spectroscopy (XPS). Spectral evolution of C 1s, Zn 2p, and O 1s are observed in real time during RF sputtering deposition. We found binding energy (BE) shifts of Zn 2p and 'Zn-O' state of O 1s depending on ZnO film thickness. Core-levels BE shifts of ZnO will be discussed on the basis of electron transfer at the interface and it may have an important role in the electronic transport property of the ZnO/graphene-based electronic device.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.371-372
• /
• 2012

We have studied lead-based gapless semiconductors, $PbPdO_2$, which is very sensitive to external parameters such as temperature, pressure, electric field, etc[1]. We have fabricated pure $PbPdO_2$, Co- and Mn-doped $PbPdO_2$ thin films using the pulsed laser deposition. Because of the volatile element of Pb, it is very difficult to grow the films. Note that in case of $MgB_2$, Mg is also volatile element. So in order to enhance the quality of $MgB_2$, some experiments are carried out in annealing with Mg-rich atmosphere [2]. This annealing process with volatile element plays an important role in making smooth surface. Thus, we applied such process to our studies of $PbPdO_2$ thin films. As a result, we found the optimal condition of ex-situ annealing temperature ${\sim}650^{\circ}C$ and time ~12 hrs. The ex-situ annealing brought the extreme change of surface morphology of thin films. After ex-situ annealing with PbO-rich atmosphere, the grain size of thin film was almost 100 times enlarged for all the thin films and also the PbO impurity phase was smeared out. And from X-ray diffraction measurements, we determined highly crystallized phases after annealing. So, we measured electrical and magnetic properties. Because of reduced grain boundary, the resistivity of ex-situ annealed samples changed smaller than no ex-situ sample. And the carrier densities of thin films were decreased with ex-situ annealing time. In this case, oxygen vacancies were removed by ex-situ annealing. Furthermore, we will discuss the transport and magnetic properties in pure $PbPdO_2$, Co- and Mn-doped $PbPdO_2$ thin films in detail.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.121-124
• /
• 2004

We have grown GaN layers with in-situ SiN mask by metal organic chemical vapor deposition(MOCVD) and study the physical properties of the GaN layer. We have also investigate the effect of the SiN mask on its optical property. By inserting a SiN mask, (102) the full width at half maximum(FWHM) decreased from 480 arcsec to 409 arcsec. The PL intensity of GaN with SiN mask improved 2 times to that without SiN mask. We have thus shown that the SiN mask improved significantly the physical and optical properties of the GgN layer.

• 한국진공학회지
• /
• 제4권S1호
• /
• pp.13-20
• /
• 1995

As으로 in-situ 도핑된 폴리실리콘 막을 원하는 부위에만 선택적으로 증착시킬 수 있는 RTP-CVD 증착기술이 성공적으로 수행되었다. 막의 증착속도는 도핑량이 증차함에 따라 점차 감소하였으나 As의 양이 5ppm보다 커지자 급격히 감소하였다. 또한 증착속도는 As의 유량이 일정할 때, SiH2CI2 유량에 따라 직선적으로 변화하였다. As 도펀트의 농도는 막내부에 비해 폴리실리콘/실리콘기판의 계면과 표면에서 상대적으로 높게 나타났으며, 특히 증착온도가 낮을 때 As 도펀트의 농도는 더 높아짐을 알 수 있었다. 실리콘 표면에서 약 40-50nm 위치에서 도펀트의 농도천이가 급격히 일어났으며, 그 결과 RTP-CVD공정을 이용할 때 극히 얕고 일정한 깊이분포를 갖는 n+-p junctions were achieved and laterally uniform delineated junctions were also observed using RTP-CVD.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.416-418
• /
• 2000

Thin films of phase-pure perovskite $(Pb_{0.72}La_{0.28})Ti_{0.93}O_3$ (PLT) were deposited in-situ onto Pt/Ti/$SiO_2$/Si substrates by pulsed laser deposition. We have systematically investigated the variation of grain sizes depending on the process condition. Both in-situ annealing and ex-situ annealing treatments have been compared depending on the annealing time. The grain sizes of PLT thin films were successfully controlled 260 to 350 nm by changing process parameters. Microstructural and electrical properties of the film were investigated by C-V measurement, leakage current measurement and SEM. Two-step process to grow $(Pb_{0.72}La_{0.28})Ti_{0.93}O_3$ (PLT) films was adopted and verified to be useful to enlarge the grain size of the film and to enhance the leakage current characteristics.