• 전자공학회논문지D
• /
• 제34D권5호
• /
• pp.14-21
• /
• 1997

The crosstalk among three identical uniform coupled microstrip transmissiom lines is examined. To analyze the crosstalk, the simultaneous equations for the voltage and current waves on each transmission line are induced from the transmission line equation. The capacitance and the inductance of the line to solve the transmission line equation are calculated by the spectral domain analysis and the space domian analysis. There are three quasi-TEM modes is three microstrip transmission lines and the characteristics mode impedences in each mode are almost equal at a weak coupling state. The crosstalk among three identical microstrip transmission lines is calculated varying the frequency from 50MHz to 3GHz.

• Journal of information and communication convergence engineering
• /
• 제2권4호
• /
• pp.237-242
• /
• 2004

In this paper, we introduce a complex systems synchronization method using hyper-chaos circuit consist of State-Controlled Cellular Neural Network (SC-CNN). We make a complex systems using SC-CNN with the n-double scroll. A complex system is created by applying identical n-double scroll or non-identical n-double scroll and Chua's oscillator with weak coupled method to each cell. Complex systems synchronization were achieved using GS(Generalized Synchronization) method between the transmitter and receiver about each state variable in the SC-CNN.

• Journal of information and communication convergence engineering
• /
• 제1권4호
• /
• pp.217-222
• /
• 2003

In this paper, we introduce a hyper-chaos synchronization method using hyper-chaos circuit consist of State-Controlled Cellular Neural Network (SC-CNN). We make a hyper-chaos circuit using SC-CNN with the n-double scroll. A hyper-chaos circuit is created by applying identical n-double scroll or non-identical n-double scroll and Chua's oscillator with weak coupled method to each cell. Hyper-chaos synchronization was achieved using GS(Generalized Synchronization) method between the transmitter and receiver about each state variable in the SC-CNN.

• ALGAE
• /
• 제24권4호
• /
• pp.205-212
• /
• 2009

Molecular genetic tools are widely used to learn more about the identical characterization of obscure microalgal strains. At the Korea Marine Microalgae Culture Center (KMMCC), the authors deduced the genetic relationship of 41 strains of the genus Tetraselmis by analysing a small subunit ribosomal DNA (18S rDNA) sequences. Forty-one strains were seperated into five groups, which showed over a 98-99% similarity to Tetraselmis striata or Tetraselmis sp. Tsbre. Also, 13 strains among them had an identical genotype to Tetraselmis striata while 5 strains had with Tetraselmis sp. Tsbre, respectively. The mean size of each strain generally showed the tendency of different variation according to the groups.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2007년도 한국음성과학회 공동학술대회 발표논문집
• /
• pp.74-77
• /
• 2007

In order to compare two hypotheses on the origin of semantic interference effect that has been offered in the psycholinguistic literature, we conducted two experiments using the picture-word interference paradigm. When participants named the pictures of the objects simultaneously presented with distractor words, they were required to use either native words (Experiment 1) or loanwords (Experiment 2). The pictures were paired with three kinds of distractor words that were identical, semantically related and neutral to the picture. Two observations were obtained from two experiments. Firstly, the naming times of the pictures were more fast in context of the identical distractors than in context of the neutral ones. Secondly, naming times were more slow in the presence of the semantically related distractors relative to the neutral ones. These findings support the claim that semantic interference is based on a lexical retrieval conflict.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1103-1107
• /
• 1990

This paper describes a new method of noise-canceling in an instrumentation using a pair of identical Potential Transformers (PT). This method allows us to get reliable signals without any noise, not only on the transmission line, but also on the sensors; even if we do not have a reference noise or a specific noise. In this case "any noise" means normal mode noise (NMN), under a quarter frequency of the switching. We proposed to call this method alternating noise-canceling (ANC). The accuracy of this new method has been verified by experimentations.entations.

• 식물병연구
• /
• 제7권1호
• /
• pp.56-59
• /
• 2001

Stem rot of cacti was found at major cultivating areas including Koyang, Ansung and Eumsung of Korea in 2000. Bipolaris cactivora was consistently isolated from the lesions. The disease occurred on different species of cactus including Cereus peruvianus, C. neopithahaja f. monstruo년, C. tetragonus, Chamaeceresu silestrii, Ch. silvestrii, f. variegata, Gymnocalcium mihanovichii var. friedrichii. G. denudatum var. pentacantha, Hylocereus trigonus and Isolatocereus dumortier. Major symptoms on the cactus species except H. trigohus were almost identical. A rapid rot of the upper portion of the catus stem appeared, and became blackened and somewhat dry. On H. trigonus, the symptom was initially light yellow, water-soaked lesion, turned into light brown and dried to death. According to pathogenicity test, 10 out of 16 cactus species and varieties tested produced identical symptoms as found in the field. However, the fungi did not show pathogenicity to Notocactus scopa, Echinocactus grusonii, Eriocactus leninghausii, Lobivia nealeana, Mammillaria elongata var. intertexta.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.437-441
• /
• 2003

The major drawback of the classical microstrip patch antennas Is their narrow band characteristic from 1% to 5%. In this paper, to improve this drawback, we designed the antenna with stacked structure having one drive patch connected with feed line and four identical radiation patches. Resonance is achieved by adjust ing coupling area between one drive patch and four identical radiation patches and changing the size of drive patch or radial ion patches. Used substrate is FR4(${\epsilon}_r$=4.6 and t=1.6mm) and designed center frequency is 2.45GHz. The designed antenna has a wide bandwidth of 380Mhz form 2.333GHz to 2.713GHz(about 15.5%) including ISM band from 2.4GHz to 2.4835GHz.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.91-94
• /
• 2000

We fabricated resistive super- conducting fault current limiters (SFCL) based on YBCO thin films grown on 2" diameter $Al_{2}O_{3}$ substrates. Two SFCLs with nearly identical properties. two SFCLs with nearly identical properties were connected in series to investigate simultaneous quenching. There was a difference of several half cycles in their quench starting time, although the difference was not more than 0.1 msec when they were operated separately. This imbalance was removed by connecting a shunt resistor to an SFCL in parallel. Increased power input at high voltages also reduced the initial imbalance in power dissipation. Further efforts on the simultaneous quench in SFCLs connected in series are on the way through methods such as the artificial control of quench speed.peed.

• Management Science and Financial Engineering
• /
• 제15권2호
• /
• pp.69-100
• /
• 2009

In this paper, we consider a relatively new two-machine flow shop scheduling problem where the unit time WIP cost increases as a job passes through various stages in the production process, and the objective is to minimize the total WIP (work-in-process) cost. Specifically, we study three special cases of the problem. First, we consider the problem where processing times on machine 1 are identical. Second, the problem with identical processing times on machine 2 is examined. The recognition version of the both problems is unary NP-complete (or NP-complete in strong sense). For each problem, we suggest two simple and intuitive heuristics and find the worst case bound on relative error. Third, we consider the problem where the processing time of a job on each machine is proportional to a base processing time. For this problem, we show that a known heuristic finds an optimal schedule.