• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.187-188
• /
• 2023

This study aimed to evaluate a feasibility of estimating setting time and compressive strength of curing conditions using a Hybrid meter. As a result, It was determined that the measured hardness value at the initial set, final set and at 5MPa of the Hybrid meter were not affected by curing conditions. And the Hybrid meter(A) is confirmed to have a higher correlation, so it is judged to be more suitable for pratical use.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.143-144
• /
• 2023

This study aimed to evaluate the feasibility of estimating the setting time and compressive strength in Ternary Blended Concrete(TBC) using Settimeter, Strength meter, and Hybrid meter. It was determined that the hardness values at the initial setting time and final setting time of Settimeter, Hybrid meter, and at the 5 MPa of Strength meter were not affected by the mixing ratio of TBC. However, future studies need to consider the errors caused by the instability of the measurement surface during condensation and the state of the measurement surface after hardening.

• 한국지능시스템학회논문지
• /
• 제24권1호
• /
• pp.71-77
• /
• 2014

본 논문에서는 저조도 및 음영이 생기는 조명 환경하에서 성능이 개선된 계량기 숫자 인식 방법을 제안한다. 저조도 및 음영 문제를 해결하기 위해 LN(Local Normalization) 처리 기법을 이용한 조명 정규화를 수행한 후, 계량기 숫자 영역 검출과 3단계 계량기 숫자 분할이 이루어진다. 마지막으로 분할된 숫자 데이터를 분류하기 위한 하이브리드 숫자 분류기가 적용된다. 제안된 하이브리드 숫자 분류기는 역전파 신경망과 템플레이트 매칭의 연속 결합으로 이루어지고, 계량기 숫자 분류에 보다 강인한 휴리스틱 규칙에 의해 최종적으로 숫자를 분류한다. 저조도 및 음영 조명 환경하의 다양한 계량기 종류에 대해 직접 촬영하여 자체 제작한 계량기 이미지 데이터베이스에 기반한 실험을 통해 본 논문에서 제안한 숫자 인식 방법을 평가하고, 제안된 계량기 숫자 인식 방법이 효과적으로 잘 동작함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.365-368
• /
• 2006

The objective of this research is to investigate usage of 3KW photovoltaic-wind power hybrid generation system composed of 500W solar power generator and 400W wind power generator in a parallel circuit. In addition, solar radiation meter and wind monitor have been installed into each generation system to obtain the practical operating data that monitored in monthly, daily and hourly. These data that are independent to weather change and location would provide adequate generation output on average and cope with emergency situation in generation system In conclusion, based on this study, it could be considered for 3KW combined generation system to be gradually propagated to houses and small-size public facilities.

• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.160-165
• /
• 2018

This paper investigates the reaction rate of $CO_2$ storing carbonation hybrid reaction by comparing the behavior of carbonation between $Ca(OH)_2$ and fly ash with that of CFBC (Circulating Fluidized Bed Combustion) containing plenty of Free-CaO. Because fly ash with CFBC contains a lot of unreacted CaO, it cannot be used as a raw material for concrete admixtures and its usages are limited. To reuse such material, we stabilized unreacted CaO by carbonation and investigated the carbonation rate. We used a pH meter and a thermometer to check the rate of the carbonization. Also, we set the contents of fly ash with CFBC, $Ca(OH)_2$, flow and fluid of $CO_2$, respectively, to 100 g, 50 g, 100 ~ 1000 cc/min and 400 g based on the content of Free-CaO. We used carbonated water instead of water, and added an alkaline activator to promote the carbonation rate. As a result, the addition of the alkaline activator and carbonated water promoted the rate of carbonation via a hybrid reaction.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.170-179
• /
• 1997

This paper presents a hybrid navigation system for AUV to locate its position precisely in rough sea. The tracking system is composed of various sensors such as an inclinometer, a tri-axis magnetometer, a flow meter, and a super short baseline(SSBL) acoustic position tracking system. Due to the inaccuracy of the attitude sensors, the heading sensor and the flowmeter, the predicted position slowly drifts and the estimation error of position becomes larger. On the other hand, the measured position is liable to change abruptly due to the corrupted data of the SSBL system in the case of low signal to noise ratio or large ship motions. By introducing a sensor fusion technique with the position data of the SSBL system and those of the attitude heading flowmeter reference system (AHFRS), the hybrid navigation system updates the three-dimensional position robustly. A Kalman filter algorithm is derived on the basis of the error models for the flowmeter dynamics with the use of the external measurement from the SSBL. A failure detection algorithm decides the confidence degree of external measurement signals by using a fuzzy inference. Simulation is included to demonstrate the validity of the hybrid navigation system.

• 한국작물학회지
• /
• 제39권3호
• /
• pp.262-269
• /
• 1994

본 연구는 잡종 강세 정도가 다른 벼 F$_1$과 양친품종들의 생장 특성 및 다수성 요인을 구명하고자 Indica와 Japonica에서 각각 F$_1$의 잡종강세가 큰 것과 작은 것 그리고 이들의 양친 등 10개 품종을 공시하여 생육 시기별 생장 특성, 질소 함량과 공간적 분포, 흡광계수, 광합성 속도, 수량 및 수량 구성요소에 대하여 검토한 결과는 다음과 같다. 1. F$_1$의 잡종강세가 나타나는 수량 구성요소는 수수와 수당 영화수였으며, 단위 면적당 영화수는 양자의 Heterosis가 상승적으로 작용하여 가장 큰 잡종강세를 나타내었으며 등숙률과 천립중은 잡종강세 현상이 나타나지 않았다. 2. 출수기에 양친보다 상층부에 분포하는 잎이 많았으며 또한 광 소멸계수는 전 생육기간에 걸쳐서 양친보다 작아서 수광상태가 양호한 군락 구조를 형성하였다. 3. F$_1$은 양친에 비하여 잎의 질소함량이 높을 뿐만 아니라 군락 상하층간의 질소농도의 구배가 커서 군락 동화에 유리한 질소의 공간적 분포를 하였는데, 특히 생육 초기에 F$_1$과 양친간 질소의 공간적 구배의 차이가 컸으며 생육의 진전에 따라 그 차이는 작아졌다. 4. 유수 분화기 엽의 광합성 속도는 F$_1$이 양친 품종들보다 높았는데 이는 엽의 질소함량이 높은데서 기인되는 것으로 판단되었으며, 같은 품종군에서는 수량의 Heterosis가 높은 조합이 광합성 속도와 질소함량이 높았다. 5. 유수분화기 이전 특히 생육초기의 군락생장율(CGR), 순동화율(NAR), 엽면적지수(LAI)는 양친에 비하여 잡종품종이 높았으며, 품종들의 이 생육지표들은 잎의 질소함량과 높은 정의 상관이 있었다. 한편 영양생장기의 이 생육지표들 및 질소 보유량과 품종들의 수량 및 단위 면적당 영화수와는 정의 유의한 상관이 있었으며 생육초기일수록 상관이 높았다. 6. F$_1$은 생육초기에 엽의 질소함량이 높아 단위동화율이 높을 뿐만아니라 질소의 군락내 상하간의 농도 구배가 크고 흡광계수가 낮아 군락의 광합성에 유리하고, 이에따른 영양 생장기 건물 생산성의 증대가 단위 면적당 영화수의 증대를 통해 수량의 증대를 가져오는 것으로 판단되었다.

• 소음진동
• /
• 제8권5호
• /
• pp.879-886
• /
• 1998

An automated calibration system of sound level meters was developed and tested. As a standard sound source, the speaker unit(Forstex FE208) cabineted by 440$\times$390$\times$490 $\textrm{mm}^3$(LHW) volume wood box was adopted. Including this source, the driving part was found out to have a good linearity of sound pressure output vs AC voltage input. The Hybrid-Bisect/Newton-Raphson method modified by the linearity was adopted as a searching algorithm. Uisng GPIB interface, the console PC make the control, measurements, and calculations and finally make the accumulation of useful data and results automatically by the instructon in the program coded by C languate. Several trials of automatic calibration using this developed system give the reliable results.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.178-191
• /
• 2003

OMC is essentialiy necessary compound in sun goods as organic UV protecting products. But the skin-trouble problem is raising because of skin penetration of OMC. In this study, non-capsulated pure OMC was compared with Organic-Inorganic-Nano-hybrid OMC for skin penetration force and SPF degree. Organic- Inorganic Nano-Hybrid OMC is OMC trapped in the pore of the mesoporous silica synthesized by the sol-gel method after OMC is nanoemulsified in the system of the hydrogenated Lecithin/ Ethanol/caprylic/capric triglyceride/OMC/water. OMC- nano- emulsion was obtained by a microfluidizing process at 1000bar and then micelle size in the nanoemulsion solution is 100-200nm range. Mesoporous silica nano-hybrid OMC was prepared by the process; surfactant was added in dissolved OMC-Nanoemulsion, then the rod Micelle was formed. OMC-nanoemulsion was capsulated in this rod Micelle and then silica precursor was added in the OMC-nanoemulsion solution. Through the hydrolysis reaction of the silica precursor, mesoporous silica concluding OMC-Nanocapsulation was obtained. The nano-hybrid surface of this OMC-Nanoemulsion-Inorganic system was treated with polyalkyl-silane compound. OMC-Mesoporous silica Nano-hybrids coated with polyalkyl-silane compound show the higher sun protecting factor (SPF Analyzer: INDEX 10-15) than pure OMC and could reduce a skin penetration of OMC. The physico-chemical properties of these nano-hybrids measured on the SPF index, partical size, strcture, specific surface area, pore size, morphology, UV absorption, rate of the OMC dissolution using SPF Analyzer, Laser light scattering system, XRD, BET, SEM, chroma Meter, HPLC, Image analyzer, microfluidizer, UV/VIS. spectrometer.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권1호
• /
• pp.45-56
• /
• 2010

Polymer composite materials offer high strength and stiffness to weight ratio, corrosion resistance, and total life cost reductions that appeal to the marine industry. The advantages of composite construction have led to their incorporation in U.S. yacht hull structures over 46 meters (150 feet) in length. In order to construct even larger hull structures, higher quality composites with lower cost production techniques need to be developed. In this study, the effect of composite hull fabrication processes on mechanical properties of glass fiber reinforced plastic (GFRP) composites is presented. Fabrication techniques investigated during this study are hand lay-up (HL), vacuum infusion (VI), and hybrid (HL+VI) processes. Mechanical property testing includes: tensile, compressive, and ignition loss sample analysis. Results demonstrate that the vacuum pressure implemented dining composite fabrication has an effect on mechanical properties. The VI processed GFRP yields improved mechanical properties in tension/compression strengths and tensile modulus. The hybrid GFRP composites, however, failed in a sequential manor, due to dissimilar failure modes in the HL and VI processed sides. Fractography analysis was conducted to validate the mechanical property testing results.